HPE ProLiant DL380p Gen8 Parts
Maintain and upgrade your HPE ProLiant DL380p Gen8 server with fully compatible components. This dual-socket 2U server is built for demanding enterprise workloads and supports Intel Xeon E5-2600 and E5-2600 v2 series processors. Whether you're expanding memory, increasing storage, or replacing parts, we offer the most trusted options available.
Available DL380p Gen8 Parts:
- Memory: DDR3 ECC Registered DIMMs (RDIMM and LRDIMM)
- Drives: 2.5" and 3.5" SATA, SAS, and SSD options
- Storage Controllers: Smart Array P420i, P420, and HBA cards
- Networking: PCIe and FlexibleLOM adapters up to 10GbE
- Power Supplies: 460W, 750W, and 1200W Platinum PSUs
- Processors: Intel Xeon E5-2600 and E5-2600 v2 Series
✅ Looking for a specific DL380p Gen8 part? Browse the categories below or reach out to our expert team for assistance.
Unique Options
$102
$75.00
NOTE: Kit is required to support cards greater than 9.5in, in the secondary position only.
NOTE: Two 1200W Power supply kits and 2 processors are required for this riser
NOTE: This riser supports two single wide, or one double wide CPU option in the secondary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers.
NOTE: Kit is required to support cards greater than 9.5in, in the primary position only, and supports one double wide card and a single PCI card in this riser.
NOTE: This riser supports one single wide, or one double wide GPU option in the primary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers
$715
$489.00
NOTE: This conversion kit is only available for the 8SFF base server model.
NOTE: A NEBS conversion cage kit is required for each riser in an 8SFF base server for the server to meet NEBS and ETSI certification.
Memory
NOTE: HPE memory from previous generation servers are not qualified or warranted with this HPE ProLiant Server. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8.
NOTE: LRDIMM, RDIMM, and UDIMM, and HDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support LRDIMM, RDIMM and UDIMMs.
E5-2600 v2 series Memory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
$63
$49.00
$92
$63.00
$61
$45.00
$73
$55.00
$100
$70.00
$63
$45.00
$81
$58.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
$60
$42.00
$87
$62.00
$162
$112.00
$161
$115.00
$181
$124.00
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series Processors.
E5-2600 (v1) series Memory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
$52
$39.00
$75
$55.00
$55
$39.00
$60
$44.00
$69
$49.00
$98
$75.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
$98
$68.00
$101
$68.00
$165
$118.00
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2600 series Processors.
NOTE: PC3L is a low voltage memory
$147
$105.00
Optical Media
Drives
NOTE: The HPE ProLiant DL380p Gen8 Smart Storage solutions are equipped with entirely re-designed Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for 'Do Not Remove'.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: All 12G SAS Hard drives only operate at 6G speeds in the DL380pGen8.
Hard Disk Drives - 2.5in SFF SAS
12G SAS Hot Plug with SmartDrive SFF 2.5in Enterprise HDD
12G SAS Hot Plug SFF 2.5in SC 512e HDD
Related Blog Post:
6G SAS Hot Plug with SmartDrive SFF 2.5in Enterprise HDD
6G SAS Hot Plug SmartDrive SFF 2.5in Midline HDD
Hard Disk Drives - 2.5in SFF SATA
6G SATA Hot Plug with SmartDrive SFF 2.5in Midline HDD
6G SATA Hot Plug SFF 2.5in SC 512e HDD
Hard Disk Drives - 3.5in LFF SAS
12G SAS Hot Plug SmartDrive LFF 3.5in Converter Enterprise HDD
12G SAS Hot Plug LFF 3.5in Midline 512e HDD
12G SAS Hot Plug LFF 3.5in SC 512e Performance HDD
6G SAS Hot Plug SmartDrive LFF 3.5in Midline HDD
Hard Disk Drives - 3.5in LFF SATA
6G SATA Hot Plug with SmartDrive LFF 3.5in Midline HDD
6G SATA Hot Plug with SmartDrive LFF 3.5in Midline HDD
6G SATA Hot Plug LFF 3.5in Midline 512e HDD
6G SATA Hot Plug LFF 3.5in SC 512e Performance HDD
Solid State Drives - 2.5in SFF SAS
12G SAS Hot Plug Value Endurance SFF 2.5in Enterprise Value SSD
12G SAS Mainstream Endurance Hot Plug SFF 2.5in Enterprise Mainstream H2 SSD
$1,252
$907.00
$461
$329.00
$422
$315.00
12G SAS Hot Plug SFF 2.5in SC Read/Write Intensive SSD
Solid State Drives - 2.5in SFF SATA
6G SATA 2.5in WI-PLP SCC SSD
6G SATA Hot Plug MU-3 SFF 2.5in SC SSD
6G SATA Hot Plug RI-3 SFF 2.5in SC SSD
6G SATA 2.5in WI-PLP SC SSD
6G SATA 2.5in MU-PLP SC SSD
6G SATA 2.5in RI-PLP SC SSD
6G SATA Value Endurance Hot Plug SFF 2.5in Enterprise Boot SSD
6G SATA Hot Plug Value Endurance SFF 2.5in Enterprise Value G1 SSD
6G SATA Value Endurance Hot Plug SFF 2.5in Enterprise Value SSD
$785
$557.00
$622
$457.00
$366
$275.00
$315
$248.00
$244
$181.00
6G SATA Hot Plug Light Endurance SFF 2.5in Enterprise Light G1 SSD
6G SATA Value Endurance Hot Plug SFF 2.5in Enterprise Value M1 SSD
$532
$391.00
$508
$368.00
$399
$275.00
6G SATA Mainstream Endurance Hot Plug SFF 2.5in Enterprise Mainstream SSD
$599
$499.00
$350
$250.00
$186
$135.00
6G SATA Hot Plug SFF 2.5in SC Read Intensive SSD
Solid State Drives - 3.5in LFF SAS
12G SAS Hot Plug Value Endurance LFF 3.5in Enterprise Value SSD
Solid State Drives - 3.5in LFF SATA
6G SATA Hot Plug LFF 3.5in RI-3 SCC SSD
$1,068
$768.00
$938
$647.00
$858
$604.00
$517
$364.00
$518
$375.00
6G SATA Hot Plug LFF 3.5in MU-3 SCC SSD
6G SATA 3.5in MU-PLP SCC SSD
6G SATA 3.5in RI-PLP SCC SSD
6G SATA Value Endurance Hot Plug LFF 3.5in Enterprise Boot SSD
6G SATA Hot Plug Value Endurance LFF 3.5in Converter Enterprise Value M1 SSD
$534
$384.00
$547
$388.00
$294
$210.00
6G SATA Hot Plug Value Endurance LFF 3.5in Converter Enterprise Value G1 SSD
$387
$287.00
$390
$269.00
6G SATA Value Endurance Hot Plug LFF 3.5in Enterprise Value SSD
$1,053
$726.00
$556
$400.00
$557
$384.00
$551
$385.00
$566
$410.00
6G SATA Hot Plug Light Endurance LFF 3.5in Enterprise Light G1 SSD
6G SATA Mainstream Endurance Hot Plug LFF 3.5in Enterprise Mainstream SSD
$755
$585.00
$490
$329.00
$380
$266.00
6G SATA Hot Plug LFF 3.5in SC Read Intensive SSD
Hard Drive Kits
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
NOTE: The part numbers for single HDD blanks below are provided should the customer require replacement HDD blanks for their server.
NOTE: With upgrade of 8SFF Cage/Bkpln (662883-B21), there is no Optical Drive support.
NOTE: All cables necessary for proper installation of the 8SFF Cage are included with this Kit.
NOTE: With upgrade of 8SFF Cage/Bkpln (662883-B21), an additional storage controller is required. HPE recommends the HPE Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller (P/N 631670-B21).
NOTE: The P822 controller has only two internal ports like the P420 controller and cannot be used to attach both 8SFF drive cages through a single controller.
NOTE: In Gen8, the 8+8SFF solution is designed as a performance configuration delivering maximum IOPS across the two drive cages. Customers seeking to have all drives in a single volume should consider the DL380p Gen8 25 SFF Configure-to-order Server (P/N 665554-B21) as a base.
$173
$125.00
Hard Drive Cables
Networking
Gigabit Ethernet adapters
Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
Quickspecs for 652503-B21 - 2 ports - SFP+ -10Gb+ - PCI Express 3.0 x8
$105
$75.00
Quickspecs for 656596-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 2.0 x8
$175
$125.00
FlexibleLOM Adapters
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.
InfiniBand
NOTE: For the following two InfiniBand Adapters, only 1 FlexibleLOM can be added to the server, which is selected in Step 2 for the 'Configuration Information - Factory Integrated Models' section. These two options are for upgrade or change from original configuration.
NOTE: FLR Indicates new HPE FlexibleLOM Adapter series.
$128
$95.00
NOTE: 10Gb Ethernet requires the use of the QSFP to SFP+ adapter P/N 655874-B21.
$405
$285.00
I/O Expansion Options
$102
$75.00
NOTE: Kit is required to support cards greater than 9.5in, in the secondary position only.
NOTE: Two 1200W Power supply kits and 2 processors are required for this riser
NOTE: This riser supports two single wide, or one double wide CPU option in the secondary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers.
NOTE: Kit is required to support cards greater than 9.5in, in the primary position only, and supports one double wide card and a single PCI card in this riser.
NOTE: This riser supports one single wide, or one double wide GPU option in the primary riser position
NOTE: The double wide riser cage kit is not supported in the 8LFF, 12LFF and 25SFF Configuration Servers
$715
$489.00
NOTE: This conversion kit is only available for the 8SFF base server model.
NOTE: A NEBS conversion cage kit is required for each riser in an 8SFF base server for the server to meet NEBS and ETSI certification.
Power Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same output and efficiency rating. If non-matched power supplies are inserted, you will get errors, and operation will fail.
NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: (link)
HPE Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent Power Discovery.
HPE Common Slot Platinum Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency to save on energy costs. HPE Common Slot Platinum Power Supplies do not support Power Discovery Services and ship with a standard AC power connector.
HPE Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HPE Common Slot -48VDC Power Supplies
NOTE: The 750W Common Slot -48VDC Hot Plug Power Supply Kit does not include a power cord. It has been designed with a terminal block connection that allows for custom design of power cords by the end user. To select an alternative power cord for your server, please review the HPE Common Slot Power Supplies QuickSpecs
$488
$399.00
HPE Common Slot 380VDC Power Supplies
NOTE: The 1200W Common Slot 380VDC Hot Plug Power Supply Kit does not include a power cord.
$455
$325.00
HPE Common Slot 277VAC Power Supplies
NOTE: The 1200W Common Slot 277VAC Hot Plug Power Supply Kit does not include a power cord. High voltage power cable option kits are sold separately.
HPE Common Slot Titanium Power Supply Kits
NOTE: The following power supply offers 96% efficiency with support for HPE Power Discovery Services.
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$126
$95.00
Computation and Graphics Accelerators
NOTE: Each DL380pGen8 server will accommodate up to three single-width or two double width NVIDIA Quadro PCIe cards for high-end Quadro graphics, up to two NVIDIA GRID PCIe cards for virtual desktop graphics or up to two NVIDIA Tesla PCIe cards or Intel Xeon Phi Coprocessors for accelerated high performance computing.
NOTE: For two double wide Graphics cards both double wide risers, and the 1200W PS are required.
$68
$49.00
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: This is supported in the 728543-B21 riser in the secondary position (second processor required) or in the 752803-B21, primary position. Maximum 3 supported with both risers, 2 in the secondary position.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: 1xK4000 is supported in the primary position with the riser 653206-B21, or in the secondary position with the riser 662885-B21 Requires the 150W cable (669777-B21)
NOTE: 2xK4000 are supported in the secondary position with the riser 653208-B21 or 728543-B21 Requires the 225W Y cable 6p x 6p (757156-B21)
NOTE: To support 3xK4000 both the primary riser (653206-B21) and the secondary riser is required (653208-B21, 662885-B21 or 728543-B21) - Would require both the 150W 9669777-B21) and the 225W Cable (757156-B21)
$537
$395.00
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: This is supported in the 728543-B21 riser in the secondary position (second processor required) or in the 752803-B21, primary position. Maximum 2 supported with both risers, support for 2 cards requires the 1200W PS to be selected
NOTE: This is supported with the Intel, E5-2600v2 processor series only.
NOTE: This is supported in the 728543-B21 riser in the secondary position (second processor required) or in the 752803-B21, primary position. Maximum 2 supported with both risers, support for 2 cards requires the 1200W PS (717359-B21) to be selected.
NOTE: This is supported with the Intel, E5-2600v2 processor series only.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: This is supported in the 728543-B21 riser in the secondary position (second processor required) or in the 752803-B21, primary position. Maximum 2 supported with both risers, support for 2 cards requires the 1200W PS to be selected.
NOTE: This is supported with the Intel, E5-2600v2 processor series only.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: This is supported in the 728543-B21 riser in the secondary position (second processor required) or in the 752803-B21, primary position. Maximum 2 supported with both risers, support for 2 cards requires the 1200W PS to be selected.
NOTE: This is supported with the Intel, E5-2600v2 processor series only.
NOTE: This is supported in the 728543-B21 riser in the secondary position (second processor required) or in the 752803-B21, primary position. Maximum 2 supported with both risers, support for 2 cards requires the 1200W PS to be selected.
NOTE: This is supported with the Intel, E5-2600v2 processor series only.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: This is supported in the 728543-B21 riser in the secondary position (second processor required) or in the 752803-B21, primary position. Maximum 2 supported with both risers, support for 2 cards requires the 1200W PS to be selected.
Storage Controllers
SAS Controllers
Smart Array P222 Controller
NOTE: P222 requires (1) HPE Mini SAS Straight to Straight 37in Cable Assembly (P/N 662897-B21)
Smart Array P420 Controller
NOTE: P420 requires (2) HPE Mini SAS Straight to Straight 37in Cable Assemblies (P/N 662897-B21)
Smart Array P421 Controller
NOTE: If a P421 controller is selected for the 12LFF model, it cannot be populated in slot 1.
Smart Array P430 Controller
NOTE: If a P430 controller is selected for any model, it cannot be populated in slots 3 or 4.
Smart Array P431 Controller
Smart Array P822 Controller
NOTE: If a P822 controller is selected for the 12LFF or 25SFF model, it cannot be populated in slot 3.
NOTE: The P822 controller has only two internal ports like the P420 controller and cannot be used to attach both 8SFF drive cages through a single controller. Please see the QuickSpecs link below for Technical Specifications and additional information.
$134
$94.00
Smart Array P830 Controller
Optional Upgrades
$63
$45.00
Host Bus Adapter
SCSI HBA
Storage Options
Storage Fibre Channel HBA
Brocade Fibre Channel HBAs
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Converged Network Adapter
$177
$129.00
Rack Options
HPE LCD8500 1U Rackmount Console Kit Models
HPE LCD8500 1U Rackmount Console Kit Options
HPE Location Discovery Services
HPE Server Console Switches
HPE Server Console Switch G2 with Virtual Media & CAC
HPE IP Console Switch G2 with Virtual Media & CAC
Rail Kits
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please take a moment to review the installation documentation that comes with the server to help you with the installation of your Gen8 server.
NOTE: Rail kits are optional for DL380p Gen8 and are no longer included standard with the server. Customers have the option to purchase their server without a rail kit.
NOTE: Ball bearing and Easy Install rail kits contain telescoping rails which allow for in-rack serviceability.
NOTE: The HPE 2U Gen8 Cable Management Arm is not available when using Friction Rails.
NOTE: To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (p/n 695539-001).
Caution: HPE recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
$203
$161.00
$241
$181.00
$152
$119.00
USB and SD options
HPE Flash Media Kits for USB Drives
NOTE: HPE qualified blank USB key for use with HPE ProLiant servers that support the VMware virtualization environment and other HPE value-add software. HPE recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware ESXi. Refer to HPE VMware Getting Started Guide for installation instructions.
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
E5-2600 v2 series Processor kits
Entry Processors - E5-2600 v2 series
NOTE: All support up to 1333MHz memory speeds.
Base Processors - E5-2600 v2 series
NOTE: All support up to1600MHz DDR3 memory speeds.
$357
$265.00
Performance Processors - E5-2600 v2 series
NOTE: All support up to 1866MHz DDR3 memory speeds
$666
$494.00
$641
$458.00
$455
$356.00
$1,020
$850.00
$419
$311.00
$727
$519.00
$283
$221.00
$283
$221.00
E5-2600 series Processor kits
Entry Processors - E5-2600 series
NOTE: All support up to 1066MHz memory speeds.
Base Processors - E5-2600 series
NOTE: All support up to1333MHz DDR3 memory speeds.
Performance Processors - E5-2600 series
NOTE: All support up to 1600MHz DDR3 memory speeds.
NOTE: Up to 2 processors supported. Performance and Energy Star Model configurations include two processors.
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology
NOTE: Turbo2: Intel Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than then previous generation turbo technology.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
$278
$216.00
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
