HPE ProLiant ML350 Gen11 Parts
Keep your HPE ProLiant ML350 Gen11 tower server running at its best with enterprise-grade replacement parts and upgrades. Known for its expandability and quiet operation, the ML350 Gen11 is a popular choice for SMBs and branch offices seeking data center-grade performance in a tower form factor.
Available ML350 Gen11 Parts:
- Memory: DDR5 ECC RDIMMs for high-speed performance
- Drives: NVMe, SAS, and SATA SSDs & HDDs
- Storage Controllers: RAID and HBA cards
- Networking: 1GbE to 100GbE Ethernet adapters
- Power Supplies: Redundant hot-plug PSU options
- Processors: Intel Xeon Scalable Gen4 CPUs (Sapphire Rapids)
✅ Looking for a specific ML350 Gen11 part? Browse the subcategories below or contact us for expert help.
Unique Options
Risers

Notes: When this Riser Kit is selected, default 4x8 Primary Riser will be removed.

Notes: When this Riser Kit is selected, Second processor is required.

Notes: When this Riser Kit is selected, Second processor is required.

Notes: When this Riser Kit is selected, Second processor is required to support NIC adapter installation with two CPU 2 MCIO connectors. Without Second processor, the PCIe slots won’t have function, tertiary riser can only be used to support RDX power connector.
Cooling Options

Notes: Processors with TDP less than 195W require Standard Heat Sink.
$650
$485.00

Notes: Processors with TDP equal to or greater than 195W require Performance Heat Sink.

Notes: When either second processor, NS204i-u or Tertiary Riser is selected, this Fan Kit is required.

Notes:
- Processors with TDP equal to or greater than 300W require this Fan Kit.
- When EDSFF drive cage selected, this fan kit is arequired.
- When this Fan Kit is selected, Second CPU Fan Kit (P47902-B21) need be selected together.

Notes:
- With External GPU fan kit installed, rear side of riser cage will be covered and no connectivity allowed with expansion card in Primary/Second riser cage.
- External GPU fan kit provides advanced cooling in heavier configurations and allow system to run with higher inlet temperature.
- When EDSFF drive cage selected, this fan kit is included in 12EDSFF FIO Drive Cage Kit already.
Optical Drives

Notes: When this ODD selected, ODD cable Kit (P56608-B21) is required.
$103
$75.00

Notes: When this ODD selected, ODD cable Kit (P56608-B21) is required.
$185
$159.00
$385
$275.00

Notes: When internal ODD selected, this ODD cable Kit is required.
Memory
HPE DDR5 Memory
Registered DIMMs (RDIMMs)
$270
$203.00
$377
$285.00
$667
$485.00
$1,379
$985.00
$2,399
$1,975.00
Drives
Hard Disk Drives
Mission Critical - 12G SAS - SFF Drives
Enterprise - 12G SAS - SFF Drives
Midline - 12G SAS - SFF Drives
Midline - 6G SATA - SFF Drives
Midline - 12G SAS - LFF Drives
$1,182
$889.00
$974
$785.00
$729
$536.00
Midline - 6G SATA - LFF Drives
$1,289
$975.00
$968
$795.00
$1,222
$819.00
Solid State Drives
For SSD selection guidance, please visit https://ssd.hpe.com/
Read Intensive - 12G SAS - SFF - Solid State Drives
$4,278
$3,056.00
$4,152
$2,966.00
$1,789
$1,418.00
Mixed Use - 12G SAS - SFF - Solid State Drives
$2,351
$1,679.00
$1,988
$1,385.00
$1,459
$1,129.00
Read Intensive - 6G SATA - SFF - Solid State Drives
$1,467
$1,048.00
$1,612
$1,127.00
$1,670
$1,193.00
$1,255
$948.00
$1,128
$806.00
Mixed Use - 6G SATA - SFF - Solid State Drives
$1,884
$1,346.00
$2,890
$2,209.00
$1,044
$865.00
$1,040
$743.00
$1,555
$1,249.00
$529
$392.00
$536
$383.00
Read Intensive - 12G SAS - LFF Solid State Drives
$4,027
$3,051.00
Mixed Use - 12G SAS - LFF Solid State Drives
Read Intensive - 6G SATA - LFF - Solid State Drives
For SSD selection guidance, please visit https://ssd.hpe.com/
$11,964
$8,546.00
$9,570
$6,836.00
$8,373
$5,981.00
$5,979
$4,271.00
$2,388
$1,706.00
$1,250
$895.00
$1,443
$1,031.00
Mixed Use - NVMe - SFF - Solid State Drives
$3,120
$2,375.00
$1,884
$1,346.00
$798
$549.00
Networking
PCIe Adapters
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
25 Gigabit Ethernet adapters
100 Gigabit Ethernet Adapters
$2,405
$1,850.00
OCP Adapters
1 Gigabit Ethernet OCP adapters
10 Gigabit Ethernet OCP adapters
10/25 Gigabit Ethernet OCP adapters
100 Gigabit Ethernet OCP adapters

Notes: OCP1 Enablement Kit is required for this adapter when install in OCP1 slot.
$1,571
$1,181.00
Storage Controllers

Notes:
- When selecting SR RAID controllers for external storage (E208e-p, 804398-B21) and MR RAID controllers for internal storage(MR216i/MR416i/MR408i) in the order, please be aware these two products use different RAID configuration tools.
- Not supporting mixing of MR (MegaRAID) series internal controllers and SR (SmartRAID) series internal Controllers.
- OCP-type RAID (OROC) controller is only supported on Slot 14 OCP 1.
- OCP 1 enablement kit is not required for listed ORCO controlers below.
HPE MegaRAID Storage Controllers
HPE Tri-Mode Controllers
$1,850
$1,319.00
$1,350
$958.00

Notes: Requires x16 riser slot
$2,499
$1,835.00
Essential RAID Controllers
Controller Battery Cable Kits

Notes: The two 260mm cable kit can’t be selected together.
$390
$278.00

Notes: This cable kit is required when one the two 260mm cable kits (P02377-B21, P01366-B21) is selected.
Power Supplies

Notes: Support limited to single 125W Processor.
$182
$137.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
Intel Fourth Generation XeonScalable Processors
Notes
-All SKUs below ship with processor only. Adequate fan and heatsink kits (standard or performance) must be selected.
-4800 MT/S maximum memory speed unless otherwise noted.
-128GB SGX Enclave unless otherwise noted.
Intel Xeon-Platinum Processors

Notes:
-Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).
-512GB SGX Enclave.

Notes:
-Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).
-512GB SGX Enclave.

Notes:Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).

Notes:
-Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).
-512GB SGX Enclave.
$7,067
$5,354.00

Notes:
-Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).
-512GB SGX Enclave.

Notes:Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).
$8,680
$6,576.00

Notes:
-Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).
-512GB SGX Enclave.
$8,680
$6,576.00

Notes:Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).

Notes:Requires Performance Heatsink (P47224-B21), Redundant Fan Kit (P47219-B21) and Second CPU Fan Kit (P47902-B21).
$5,826
$4,414.00

Notes:
-Requires Performance Heatsink (P47224-B21).
-512GB SGX Enclave.
Intel Xeon-Gold Processors

Notes:
-Requires Performance Heatsink (P47224-B21).
-512GB SGX Enclave.

Notes:Requires Performance Heatsink (P47224-B21).
$4,586
$3,474.00

Notes:Requires Performance Heatsink (P47224-B21).

Notes:
-Requires Performance Heatsink (P47224-B21).
-4400 MT/s maximum memory speed.
$2,744
$1,978.00

Notes:Requires Performance Heatsink (P47224-B21).

Notes:Requires Performance Heatsink (P47224-B21).

Notes:
-Requires Performance Heatsink (P47224-B21).
-Only supported in single socket configuration.
$5,826
$4,414.00

Notes:
-Requires Standard Heatsink (P47223-B21).
-4400 MT/s maximum memory speed.
-Only supported in single socket configuration.

Notes:
-Requires Standard Heatsink (P47223-B21).
-512GB SGX Enclave.

Notes:
-Requires Standard Heatsink (P47223-B21).
-512GB SGX Enclave.

-Notes:Requires Standard Heatsink (P47223-B21).

Notes:Requires Performance Heatsink (P47224-B21).

Notes:
-Requires Standard Heatsink (P47223-B21).
-4000 MT/s maximum memory speed.

Notes:
-Requires Standard Heatsink (P47223-B21).
-4000 MT/s maximum memory speed.

Notes:
-Requires Standard Heatsink (P47223-B21).
-4400 MT/s maximum memory speed.

Notes:
-Requires Standard Heatsink (P47223-B21).
-4400 MT/s maximum memory speed.
-Only supported in single socket configuration.

Notes:
-Requires Standard Heatsink (P47223-B21).
-4400 MT/s maximum memory speed.

Notes:
-Requires Standard Heatsink (P47223-B21).
-4400 MT/s maximum memory speed.
Intel Xeon-Sliver Processors

Notes:
-Requires Standard Heatsink (P47223-B21).
-4000 MT/s maximum memory speed.
-64GB SGX Enclave.

Notes:
-Requires Standard Heatsink (P47223-B21).
-4000 MT/s maximum memory speed.
-64GB SGX Enclave.
Intel Xeon-Bronze Processors

Notes:
-Requires Standard Heatsink (P47223-B21).
-4000 MT/s maximum memory speed.
-64GB SGX Enclave.
-Only supported in single socket configuration.