HPE ProLiant DL110 Gen12 Parts

1U short-depth rack serverIntel Xeon 6 SoC processor

The HPE ProLiant DL110 Gen12 is a 1U, short-depth, front-cabled rack server built around one Intel Xeon 6 SoC processor, the 6716P-B, and it takes one memory family: HPE DDR5-6400 dual-rank registered kits, fitted in a quantity of 1, 2 or 4. This page lists the 38 parts HPE's QuickSpecs list for it, by part type.

  • 38 HPE-listed parts
  • 4 DIMM slots, up to 512GB
  • 2 M.2 NVMe SSDs, up to 3.84TB
  • 8 onboard 10/25GbE ports
  • M-CRPS power, 1300W AC (900W low-line) or 1000W -48VDC

Specifications: HPE QuickSpecs a50009248enw, version 4 (October 5, 2026), in which HPE calls the server “HPE ProLiant Compute DL110 Gen12”. Memory and drive figures match the DL110 Gen12 Memory and Drives pages.

Shop DL110 Gen12 parts by type

More DL110 Gen12 parts: chassis, expansion and enablement

Most ordered from this list

The parts on this page our customers order most, for any server.

  1. MemoryP69727-B2132GB (1x32GB) Dual Rank x8 DDR5-6400 CAS-52-52-52 EC8 Registered Smart Memory Kit
  2. Network adaptersP42044-B21Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE
  3. MemoryP69728-B2164GB (1x64GB) Dual Rank x4 DDR5-6400 CAS-52-52-52 EC8 Registered Smart Memory Kit
  4. Network adaptersP22767-B21Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE
  5. Network adaptersP51178-B21Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE
  6. Network adaptersP10106-B21Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE

DL110 Gen12 at a glance

Processor

One Intel Xeon 6 SoC 6716P-B (40 cores, 235W), included with its heat sink in the configure-to-order server. The server takes one processor, and the list has no processor or heat sink part.

Memory

4 DIMM slots, one per channel, for HPE DDR5-6400 dual-rank registered kits of 32GB, 64GB, 96GB or 128GB. Up to 512GB with 128GB kits in all 4 slots.

HPE's memory population rules allow 1, 2 or 4 DIMMs (its ordering note, shown in the list, says 1 or 4), and single-rank and dual-rank DIMMs may not be mixed. DL110 Gen12 Memory

Drives

Two M.2 NVMe SSDs on the system board, 2280 or 22110, up to 3.84TB (2 x 1.92TB); none ship as standard, and there are no drive bays. HPE lists four PE9010 M.2 2280 SSDs. RAID is Intel VROC, off by default and licensed for RAID 0 or 1; with VROC, the M.2 drives may not be mixed. DL110 Gen12 Drives

Networking and expansion

8 onboard 10/25GbE ports. Every expansion slot is optional and comes with its kit. A PCIe card needs the 2x16 FHHL PCIe Riser Kit (P86620-B21), which gives two PCIe 5.0 x16 FHHL slots for up to two network adapters or accelerators.

A DSFF OCP adapter needs the DSFF OCP Kit (P86621-B21), and an SFF OCP adapter needs the SFF OCP Cable Kit (P86622-B21); each OCP kit takes exactly one card of its size. With the riser, the OCP options are not supported.

The 400Gb B3140H adapter needs the DL110 Gen12 Adapter Power Cable for NVIDIA BF3 (P86625-B21). DL110 Gen12 Networking Adapters

Power

One or two M-CRPS hot-plug supplies with reverse airflow, 1300W Titanium AC or 1000W -48VDC. The 1300W supply is rated 1300W on high-line input (200 to 240 VAC) and 900W on low-line (100 to 120 VAC). HPE does not support mixing power supplies. DL110 Gen12 Power Supplies

Timing

Optional M.2 GNSS module and 4-hour or 8-hour DPLL timing modules. GNSS and timing modules

Rack mounting

The HPE 1U Short Friction Rail Kit (775612-B21) needs the DL110 Gen12 Rail Compatible Ear Kit (P86627-B21). Rack options

Management

HPE iLO 7.

Specifications from HPE QuickSpecs a50009248enw, version 4 (October 5, 2026). Memory figures match the DL110 Gen12 Memory page.

Before you order memory, check the processor and the number of kits. HPE lists one processor for the DL110 Gen12, the Intel Xeon 6 SoC 6716P-B: find the model in iLO under System Information › Processors, and if it shows any other, the server is not a DL110 Gen12. A DL110 Gen12 takes HPE DDR5-6400 dual-rank registered kits of 32GB to 128GB in its 4 slots, and HPE allows 1, 2 or 4 of them, not 3.

Complete your DL110 Gen12 build

Is it a DL110 Gen12? How to tell

HPE lists one processor for the DL110 Gen12, and the server takes one memory family.

What to checkDL110 Gen12 This page
Processor model numbersXeon 6 SoC 6716P-B only
MemoryDDR5-6400, 4 slots
Memory kits look likeP69727-B21, P69728-B21
Parts pageYou are here

From the HPE QuickSpecs of each server: HPE ProLiant Compute DL110 Gen12 a50009248enw version 4.

All 38 DL110 Gen12 parts

Grouped by part type; within each group the parts are in the order of HPE's QuickSpecs. Open a group, or type a part number or a few words to filter the whole list.

DL110 Gen12 parts questions

How much memory does the DL110 Gen12 support?

Up to 512GB: 128GB DDR5-6400 registered DIMMs in all 4 slots, one per channel. HPE lists dual-rank kits of 32GB, 64GB, 96GB and 128GB; its population rules allow 1, 2 or 4 DIMMs (its ordering note says 1 or 4), and single-rank and dual-rank DIMMs may not be mixed.

Which drives fit the DL110 Gen12?

Two M.2 NVMe SSDs on the system board, in the 2280 or 22110 form factor, up to 3.84TB as two 1.92TB drives; the server has no drive bays. HPE lists four PE9010 NVMe Gen4 Read Intensive M.2 2280 SSDs from 480GB to 1.92TB, one of them self-encrypting. RAID comes from Intel VROC, and with VROC the two M.2 drives may not be mixed.

Can I add or change the processor in a DL110 Gen12?

The DL110 Gen12 takes one processor, and HPE lists one model for it: the Intel Xeon 6 SoC 6716P-B, included with its heat sink in the configure-to-order server. The list on this page has no processor or heat sink part.

Is my server a DL110 Gen12?

Check the processor model in iLO under System Information › Processors. HPE lists one processor for the DL110 Gen12, the Intel Xeon 6 SoC 6716P-B, with no Bronze, Silver, Gold or Platinum in its name; any other model means another server. A DL110 Gen12 is a 1U, short-depth, front-cabled chassis with 8 onboard 10/25GbE ports, and it takes DDR5-6400 memory in 4 slots and M.2 NVMe drives only.

Are refurbished parts on this list too?

Yes. A refurbished part carries the same HPE part number as a new one, so it is listed here under that number, and each listing shows its condition. Every part ships tested or factory sealed.

What warranty comes with DL110 Gen12 parts?

A replacement warranty of 1 to 5 years, depending on the part: memory is covered for 5 years, and many other parts for 1 or 3 years.

More HPE server parts

All HPE parts by server model
Ships same dayMost orders ship the same business day
1 to 5 year warrantyTested or factory sealed
Purchase orders acceptedCard, P-card, ACH, wire or PayPal too
Drives4 parts

All drives on the DL110 Gen12 Drives page

Storage

  • P80318-B21 HPE 480GB NVMe Gen4 Mainstream Performance Read Intensive M.2 2280 PE9010 SSD
  • P80321-B21 HPE 960GB NVMe Gen4 Mainstream Performance Read Intensive M.2 2280 PE9010 SSD
  • P80327-B21 HPE 960GB NVMe Gen4 Mainstream Performance Read Intensive M.2 2280 Self-encrypting PE9010 SSD
  • P80324-B21 HPE 1.92TB NVMe Gen4 Mainstream Performance Read Intensive M.2 2280 PE9010 SSD
HPE notes (2)
  • Max QTY = 2
  • Mixing of M.2 is not allowed when VROC is selected
Memory4 parts

All memory on the DL110 Gen12 Memory page

Registered DIMMs (RDIMMs)
HPE notes (3)
  • Quantity of memory DIMMs selected must be 1 or 4
  • Mixing Single Rank and Dual Rank DIMM is not allowed
  • The -B21 memory SKUs shown in this document are to be used when ordering stand-alone memory only. For each -B21 SKU, there is a corresponding -F21 SKU which is to be used when configuring servers with integrated memory DIMMs.
Network adapters14 parts

All network adapters on the DL110 Gen12 Networking Adapters page

PCIe Adapters

1 Gigabit Ethernet Adapters
10/25 Gigabit Ethernet Adapters
100 Gigabit Ethernet Adapters

SFF OCP 3.0 Adapter

1 Gigabit Ethernet OCP Adapters
10/25 Gigabit Ethernet OCP Adapters
100 Gigabit Ethernet OCP Adapters

DSFF OCP 3.0 Adapter

10/25 Gigabit 8 Port Ethernet OCP Adapters
  • P84529-B21 Intel E830-XXVDA8F Ethernet 10/25Gb 8-port SFP28 OCP3 Adapter for HPE

HPE PCIe InfiniBand

  • P66386-H21 HPE Data Processing Unit InfiniBand NDR200/Ethernet 200Gb 2-port QSFP112 FHHL B3220 Adapter
  • P66387-H21 HPE Data Processing Unit InfiniBand NDR/Ethernet 400Gb 1-port QSFP112 HHHL B3140H Adapter
    HPE note

    If “HPE Data Processing Unit InfiniBand NDR/Ethernet 400Gb 1-port QSFP112 HHHL B3140H Adapter (P66387-H21 )“ is selected, then HPE ProLiant Compute DL110 Gen12 Adapter Power Cable for NVIDIA BF3 (P86625-B21) must be selected.

Riser cards3 parts

I/O Expansion Slot

PCIe Slot
  • P86620-B21 HPE ProLiant Compute DL110 Gen12 2x16 FHHL PCIe Riser Kit
    HPE note

    Includes 2 FHHL x16 PCIe Slots. Can support up to 2 PCIe Cards (NIC or Accelerator). If the 2x16 riser, P86620-B21, is selected then the OCP IO options are not supported

OCP Slot
  • P86621-B21 HPE ProLiant Compute DL110 Gen12 DSFF OCP Kit
  • P86622-B21 HPE ProLiant Compute DL110 Gen12 SFF OCP Cable Kit
HPE notes (2)
  • If DSFF OCP Kit is selected, then min/max 1 of DSFF OCP Card must be selected
  • If SFF OCP Kit is selected, then min/max 1 of SFF OCP Card must be selected
Power supplies4 parts

All power supplies on the DL110 Gen12 Power Supplies page

  • P79329-B21 HPE 1000W M-CRPS -48VDC Hot Plug Reverse Air Flow Power Supply Kit
  • P79068-B21 HPE 1300W M-CRPS Titanium Hot Plug Reverse Air Flow AC Power Supply Kit
HPE notes (2)
  • All power supply kits have reverse airflow to support front cabled design of DL110
  • Mixing power supplies is not supported. Available in 96% efficiency (EU Lot 9 compliant)

DC Power Lug Kit

  • P89759-B21 HPE 1000W -48VDC Power Lug Kit
  • P89830-B21 HPE Front Cabled Telco 1000W -48VDC Power Lug Kit
Cable kits1 part
  • P86625-B21 HPE ProLiant Compute DL110 Gen12 Adapter Power Cable for NVIDIA BF3
Rack options2 parts

Rail/Ear Kits

  • 775612-B21 HPE 1U Short Friction Rail Kit
    HPE note

    Requires selection of Rail Compatible Ear Kit

  • P86627-B21 HPE ProLiant Compute DL110 Gen12 Rail Compatible Ear Kit
    HPE note

    Rail kit and Ear kit must be selected when the server is selected with 2 post and 4 post Racks

Accelerators3 parts
  • S0K89C NVIDIA L4 24GB PCIe Accelerator for HPE
  • S1C90C Qualcomm X100 5G RAN GNSS Accelerator for HPE
  • S1C91C Qualcomm X100 5G RAN Accelerator for HPE
GNSS and timing modules3 parts
  • P83776-B21 HPE M.2 GNSS Module
  • P83777-B21 HPE M.2 4-hour DPLL Module
  • P87250-B21 HPE M.2 8-hour DPLL Module
Ships same dayMost orders ship the same business day
1 to 5 year warrantyReplacement coverage on every part
5,000+ five-star reviewsShopper Approved, BBB A+ rating
Ships to 120+ countriesBy UPS; duties are collected by the carrier

Building out several servers, or need a part not listed?

Send the part numbers and quantities for each server and we reply to every quote request within 24 hours. Live chat is the fastest way to reach us.

!