HPE ProLiant DL110 Gen12 Parts
The HPE ProLiant Compute DL110 Gen12 is HPE's telco edge server: a single-socket, short-depth, front-cabled 1U chassis with front-accessible I/O, designed for NEBS Level 3 compliance and built around one Intel Xeon 6 SoC processor with Intel vRAN Boost. HPE positions it for vRAN and 5G edge deployments by communication service providers. Every part below is genuine HPE, available new and refurbished, and tested for compatibility before it ships; live pricing appears in the tables further down this page.
DL110 Gen12 Platform at a Glance
- Form factor: 1U rack, front cabled, reverse airflow (front to rear); 4.29 × 43.46 × 47.28 cm (1.69 × 17.11 × 18.61 in), 10.66 to 12.13 kg; mounts in 2-post and 4-post racks
- Processor: one Intel Xeon 6 SoC 6716P-B — 40 cores, 160MB L3 cache, 235W — with Intel vRAN Boost, media acceleration and Intel AMX in every core; included with the server, no separate chipset
- Memory: 4 DDR5 DIMM slots on 4 channels at one DIMM per channel, taking HPE DDR5 Smart Memory RDIMMs at 6400 MT/s, up to 512GB as four 128GB kits
- Onboard networking: eight 10/25Gbps ports on the motherboard, expandable to 20 10/25GbE ports with option cards
- Expansion: either the 2x16 FHHL PCIe 5.0 riser kit (two full-height half-length x16 slots for NICs or accelerators) or one DSFF plus one SFF OCP NIC 3.0 slot — HPE states the OCP options are not supported when the riser is selected
- Storage: two M.2 NVMe slots on the motherboard, 2280 or 22110, up to 3.84TB as two 1.92TB drives, behind Intel VROC software RAID 0/1; no drive bays and no hardware RAID controller
- Timing: five front SMA connectors (10 MHz in/out, 1PPS in/out, GNSS antenna) with optional M.2 GNSS receiver and 4-hour or 8-hour DPLL modules
- Power and cooling: up to two hot-plug M-CRPS power supplies, 1300W Titanium AC or 1000W -48VDC, both reverse airflow; eight dual-rotor hot-plug fans
- Management and security: HPE iLO 7 with a dedicated 1Gb RJ-45 and a front USB-C service port, silicon root of trust, TPM 2.0, UEFI Class 3 in UEFI mode only
- Environment and warranty: ASHRAE A3/A4, 10 to 35°C standard operating range; 3-year parts, labor and onsite warranty
This server has no drive bays, no hardware RAID controller and no processor option kits. The single Intel Xeon 6 SoC 6716P-B is included with the server, storage is two M.2 NVMe slots on the motherboard behind Intel VROC software RAID, and there is no Smart Array or MR option — so the DL110 Gen12 has no processors page and no storage controllers page here. What you buy for it is memory, M.2 SSDs, network adapters and accelerators, the I/O kit that decides which cards fit, power supplies and timing modules.
Specifications on this page are taken from the HPE QuickSpecs for this server, HPE ProLiant Compute DL110 Gen12 QuickSpecs, Version 3.
Shop DL110 Gen12 Parts by Category
- DL110 Gen12 memory — HPE DDR5-6400 Registered Smart Memory kits at 32GB, 64GB, 96GB and 128GB
- DL110 Gen12 drives — PE9010 NVMe Gen4 Read Intensive M.2 2280 SSDs from 480GB to 1.92TB, including a self-encrypting 960GB
- DL110 Gen12 networking adapters — 1Gb, 10/25Gb and 100Gb PCIe and OCP 3.0 adapters, the 8-port DSFF card and two NVIDIA BF3 data processing units
- DL110 Gen12 power supplies — the 1300W Titanium AC and 1000W -48VDC M-CRPS supplies with the DC power cord and lug kits
Also on this page: the PCIe riser kit and the DSFF and SFF OCP kits, the NVIDIA L4 24GB and Qualcomm X100 5G RAN accelerators, the adapter power cable for the NVIDIA BF3 DPU, the M.2 GNSS and DPLL timing modules, and the 1U rail kit with its ear kit.
Which I/O configuration does your DL110 Gen12 have?
| I/O kit | What it provides | Takes |
|---|---|---|
| 2x16 FHHL PCIe Riser Kit | Two full-height half-length PCIe 5.0 x16 slots | Up to two PCIe cards, NIC or accelerator; OCP options not supported |
| DSFF OCP Kit (slot A) | One OCP NIC 3.0 Dual Small Form Factor slot, PCIe 5.0 x16 | Exactly one DSFF card, such as the 8-port 10/25Gb E830 |
| SFF OCP Cable Kit (slot B) | One OCP NIC 3.0 Small Form Factor slot, PCIe 5.0 x16 | Exactly one SFF OCP3 card |
The riser and the OCP kits are alternatives for the same space, so the first question on any DL110 Gen12 upgrade is which of the two the chassis was built with: a PCIe-built server takes the PCIe adapters and accelerators, an OCP-built server takes one DSFF card and one SFF card and nothing else. We also stock parts for the HPE ProLiant DL320 Gen12 and the HPE ProLiant DL360 Gen12, the rest of the range under HPE ProLiant DL rack server parts, and every model under HPE parts by server model.
DL110 Gen12 Parts FAQ
What is the HPE ProLiant DL110 Gen12 designed for?
Telco edge and vRAN workloads. HPE describes it as a compact, short-depth, front-accessible 1U single-processor chassis ruggedized for NEBS Level 3, aimed at communication service providers' 5G edge deployments, with 8 x 25GbE onboard networking and optional GNSS timing.
Can I add a second processor to a DL110 Gen12?
No. The DL110 Gen12 is a single-socket server built around one Intel Xeon 6 SoC 6716P-B with 40 cores and 235W, which is included with the server. HPE lists no processor or heat-sink option kits for this model, so there is no processors page here.
How many drives does a DL110 Gen12 hold?
Two. Storage is two M.2 NVMe slots on the motherboard, 2280 or 22110 form factor, for a maximum of 3.84TB as two 1.92TB drives. There are no hot-plug drive bays and no SAS or SATA option.
Does the DL110 Gen12 have a RAID controller?
Not a hardware one. RAID is Intel Virtual RAID on CPU (VROC) software RAID 0 or 1, which HPE states is disabled by default and requires licensing. No Smart Array or MR controller is listed, so there is no storage controllers page for this model.
What are the SMA connectors on the front of the DL110 Gen12?
Five coaxial connectors for precision timing: 10 MHz in and out, 1PPS in and out, and a GNSS antenna input. They work with the optional M.2 GNSS receiver module and the M.2 4-hour or 8-hour DPLL modules listed on this page.
Which power supplies does the DL110 Gen12 use?
Hot-plug M-CRPS supplies, up to two for redundancy: a 1300W Titanium AC unit or a 1000W -48VDC unit. Both are reverse-airflow (front to rear) parts for the front-cabled chassis, and HPE states mixing power supplies is not supported.
✅ Looking for a specific DL110 Gen12 part? Browse our full selection below.
Browse all models
Why Global One?
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.
