HPE ProLiant ML310e Gen8 Parts
Unique Options

NOTE: The LFF Kit is a backplane kit designed for going from NHPE LFF to hot-plug LFF.
$268
$218.00

NOTE: The SFF Kit is the cage plus backplane and designed to convert from any LFF configuration to SFF.
$305
$179.00

NOTE: The HPE 4U Redundant Power Supply Enablement Kit (675843-B21) must be installed when using HPE Common Slot power supplies.
$950
$750.00
Memory
Unbuffered with ECC DIMMs (UDIMMs)
$107
$63.00
$98
$68.00
$123
$72.00
$116
$68.00
$201
$118.00
Drive Cage Options
NOTE: The LFF Kit is a backplane kit designed for going from NHPE LFF to hot-plug LFF.

NOTE: The SFF Kit is the cage plus backplane and designed to convert from any LFF configuration to SFF.
$305
$179.00
Optical Media
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
3G SATA MLC Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
Hard Drive Kits
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
NOTE: The part numbers for single HDD blanks below are provided should the customer require replacement HDD blanks for their server
$56
$38.00
$35
$25.00
Networking
Gigabit Ethernet adapters


$167
$98.00


$101
$59.00


$185
$128.00
10 Gigabit Ethernet adapters


$128
$75.00
Power Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not supported.
NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at:
HPE Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% efficiency.
Enablement Kit

NOTE: The HPE 4U Redundant Power Supply Enablement Kit (675843-B21) must be installed when using HPE Common Slot power supplies.
$950
$750.00
NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC cable.
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
Storage Controllers

SAS Controllers
HPE Smart Array P222 Controller
HPE Smart Array P420 Controller
HPE Smart Array P421 Controller
Optional Upgrades
$77
$45.00
HPE Host Bus Adapters
$191
$112.00
$402
$236.00
$453
$266.00
SCSI HBA
Tape Backup

NOTE: Connection using HPE SC11Xe Host Bus Adapter (412911-B21) recommended.
$1,056
$950.00

NOTE: Connection using HPE SC11Xe Host Bus Adapter (412911-B21) recommended.
$1,056
$950.00

NOTE: Connection using HPE SC11Xe Host Bus Adapter (412911-B21) recommended.
$2,167
$1,288.00

NOTE: Connection using HPE SC11Xe Host Bus Adapter (412911-B21) recommended.
$939
$558.00

NOTE: Requires HPE 1U Tape Autoloader Rack Kit (AH166A) for rack installation. Connection using HPE Smart Array P222Controller (631667-B21) recommended.
$5,421
$4,879.00

NOTE: Connection using HPE H222Host Bus Adapter (650926-B21) recommended.
$1,667
$1,500.00

NOTE: Connection using HPE H222Host Bus Adapter (650926-B21) recommended.
$1,855
$1,103.00
$6,146
$3,606.00
$4,110
$2,443.00
$4,878
$2,900.00
$1,657
$985.00
$2,453
$1,458.00