HPE ProLiant DL365 Gen10 Plus Parts
The HPE ProLiant DL365 Gen10 Plus is a 2P, 1U AMD platform built for core density — 3rd Generation AMD EPYC 7003 Series processors, 32 DDR4 DIMM slots, PCIe 4.0 throughout, and an 8 SFF front end that extends to 10 SFF with the optional 2SFF cage. Every part below is genuine HPE, available new and refurbished, and tested for compatibility before it ships. Live pricing for each part number appears in the tables further down this page.
DL365 Gen10 Plus Platform at a Glance
- Processors: one or two 3rd Generation AMD EPYC 7003 Series processors — the option list runs from an 8-core 120W part to 64-core 280W parts, and includes the X-series models rated at 768MB of cache
- Memory: 32 DIMM slots — 16 per processor, 8 channels per processor, 2 DIMMs per channel — HPE DDR4 Smart Memory Registered DIMMs at 3200 MT/s; the base-configuration note states 32 slots require two processors
- Storage: 8 SAS/SATA/NVMe SFF bays, plus an optional 2SFF cage for a stated total maximum of 10 SFF — the 8 SFF chassis table lists rear drive cages as not available
- Networking: network ports are listed as none — a choice of OCP 3.0 or stand-up PCIe card, with only one OCP slot available
- Expansion: PCIe 4.0 — two slots standard in the primary riser, up to three slots with two processors
- Power: HPE Flex Slot hot-plug supplies at 500W, 800W, 1000W, and 1600W, plus an 1800W–2200W Titanium kit whose own note caps Gen10 Plus output at 1600W
- Management: HPE iLO 5 with Intelligent Provisioning standard, iLO Advanced and OneView optional
Count your processors before you plan the build. The DL365 Gen10 Plus is a 2P, 1U server whose own notes make the second CPU a prerequisite — 32 DIMM slots require two processors, and the third PCIe slot needs one too. With a single processor, half the memory and one slot stay out of reach.
Full platform detail is in the official HPE DL365 Gen10 Plus QuickSpecs.
Shop DL365 Gen10 Plus Parts by Category
- DL365 Gen10 Plus Memory — DDR4-3200 Registered Smart Memory kits from 8GB to 64GB
- DL365 Gen10 Plus Drives — SFF Basic Carrier SAS, SATA, and NVMe, plus M.2
- DL365 Gen10 Plus Storage Controllers — Smart Array SR Gen10 and Gen10 Plus tri-mode RAID
- DL365 Gen10 Plus Networking Adapters — 1Gb to 100Gb Ethernet in PCIe and OCP 3.0, plus InfiniBand
- DL365 Gen10 Plus Power Supplies — Flex Slot Platinum, Titanium, universal, and -48VDC kits
- DL365 Gen10 Plus Processors — AMD EPYC 7003 Series CPUs and heat sink kits
Comparing platforms? See DL365 Gen11 parts, or the AMD siblings of this era: DL385 Gen10 Plus v2 parts and DL325 Gen10 Plus v2 parts. Our guide to how Gen10 and Gen11 compare covers the jump, or browse all HPE parts by server model.
DL365 Gen10 Plus Parts FAQ
What processors does the HPE ProLiant DL365 Gen10 Plus use?
3rd Generation AMD EPYC 7003 Series processors, one or two per server. The option list holds 21 models, from the 8-core 120W EPYC 7203 to 64-core 280W parts such as the EPYC 7763 and the 768MB-cache EPYC 7773X.
How many DIMM slots does the DL365 Gen10 Plus have?
32 - 16 per processor, 8 channels per processor, 2 DIMMs per channel. The base-configuration note states that all 32 DIMM slots require selection of two processors. The memory option list is HPE DDR4-3200 Registered Smart Memory in 8GB, 16GB, 32GB, and 64GB kits.
How many drives fit in a DL365 Gen10 Plus?
Eight SAS/SATA/NVMe SFF bays as standard. The front-view notes list an optional 2SFF cage for a total maximum of 10 SFF, and the 8 SFF chassis table lists rear drive cages as not available.
Does the DL365 Gen10 Plus have onboard network ports?
No. The interfaces table lists network ports as none, with a choice of OCP or stand-up card, and Network Choice models do not include an embedded LOM. A dedicated 1Gb iLO management port is standard, and only one OCP slot is available.
Do DL365 Gen10 Plus processors include a fan kit or heat sink?
No. Each processor group's notes state the processor does not include a fan kit or a heat sink kit, and then name the fan kit and heat sink kit that group requires. Order cooling alongside the CPU.
Can I mix new and refurbished parts in the DL365 Gen10 Plus?
Yes. Genuine HPE parts perform identically whether new or refurbished, and refurbished stock is tested before shipping - a common way to add memory, drives, or a second power supply at lower cost.
✅ Looking for a specific DL365 Gen10 Plus part? Browse our full selection below.
Browse all models
Why Global One?
- Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.
