HPE ProLiant DL785 G6 Parts
Memory
Registered RDIMMs
NOTE: A minimum of two DIMMs (1 kit) must be installed per processor.
NOTE: Memory must be ordered in like-pairs, i.e. two of the same size.
NOTE: When only PC2-6400 DIMMs modules are installed with a processor then the memory bus speeds for 4 or fewer, 6 or 8 DIMMs per processor will operate at PC2-6400, PC2-5300 and PC2-4200 respectively. All other processor and memory configurations will operate at PC2-5300 with 4 or fewer DIMMs and PC2-4200 with 6 or more DIMMs.
Optical Media
$194
$175.00
$55
$39.00
Drives
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: All the internal drives in HPE ProLiant DL785 G6 will operate at a maximum data transfer rate of 3Gb/s.
NOTE: Up to 16 disks in position 1-16 are supported if the HPE SAS Expander and P410 Controller is used.
Networking
Gigabit Ethernet adapters

NOTE: There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapter NICs allowed in this server.
$165
$125.00
$161
$115.00

NOTE: Supported on a full length-full height slot only.
$72
$55.00
10 Gigabit Ethernet adapters

NOTE: A minimum of two Gigabyte (2 GB) of server memory is required for each NC522SFP dual port adapter.
$92
$75.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Power Supplies
CAUTION: Many HPE ProLiant Servers now offer new power options, including Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration. This provides improved power delivery and the advantage of reclaiming lost power. Prior to making a power supply selection it is "highly recommended" that the "HPE Power Advisor" is run to determine the right size power supply for your server configuration. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
Power Supplies
$184
$138.00
NOTE: Three additional power supply units are required for full redundancy.
Storage Controllers
SAS Controller
Smart Array E500 Controller
$392
$288.00
Smart Array P400 Controller
$108
$81.00

NOTE: 405132-B21 comes with 256 MB Cache.
$70
$53.00
Smart Array P800 Controller

$219
$165.00
Smart Array P212 Controller
Smart Array P410 Controller
$201
$149.00
NOTE: AM436A HPE DL785 Smart Array Controller cable option kit is included when ordered on the DL785 with CTO factory integration.
NOTE: AM436A HPE DL785 Smart Array Controller cable option kit is required when the controller is ordered without factory integration and not connected to the 468406-B21 HPE SAS Expander Card.
Smart Array P411 Controller
Optional Upgrades

NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$95
$75.00

NOTE: For Smart Array P400 Controller only.
NOTE: If you install the 512MB DDR BBWC as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HPE SA-P400 and SA-E500 24 In Battery Cable Kit).
$166
$129.00

NOTE: For Smart Array P400 Controller only.
NOTE: If you install the Battery-backed write cache as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HPE SA-P400 and SA-E500 24 In Battery Cable Kit).
$157
$118.00

NOTE: Option kit not supported for factory integration.
NOTE: Supported on HPE Smart Array P212 Controller and P410 Controller only.
$41
$29.00

NOTE: Option kit not supported for factory integration.
NOTE: Supported on HPE Smart Array P212 Controller and P410 Controller only.
$173
$129.00

NOTE: Option kit not supported for factory integration.
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
$207
$156.00
SAS Controller Options

NOTE: Option kit not supported for factory integration.
NOTE: Enables a single Smart Array P410 Controller to control all of the embedded HDD's. Allows the configuration of a RAID array with up to 16 embedded HDD's. The Controller must be installed in PCIe Slot 1 and the Expander in PCIe Slot 2. The embedded SA P400i controller is not used.
NOTE: AM440A HPE DL785 SAS Expander cable option kit required.
NOTE: Requires SA P410 Controller with Cache memory.
$233
$175.00
SAS HBA
SCSI HBA
SAS Option Kit

NOTE: The SAS Option Kit enables the second drive cage to support an additional eight SFF SAS hard disk drives, for a total internal support of sixteen SFF SAS hard disk drives.
NOTE: When choosing the HPE DL785 G5 SAS Option Kit, customer must also order one of the following Smart Array Controllers: HPE Smart Array P400 Controller, HPE Smart Array P800 Controller, or the HPE Smart Array P410 Controller.
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
6-Core Processors
$2,614
$1,980.00
$1,447
$1,096.00