HPE ProLiant DL785 G6 Storage Controllers
Storage Controllers
SAS Controller
Smart Array E500 Controller
$392
$288.00
Smart Array P400 Controller
$138
$81.00

NOTE: 405132-B21 comes with 256 MB Cache.
$90
$53.00
Smart Array P800 Controller

$281
$165.00
Smart Array P212 Controller
Smart Array P410 Controller
$201
$149.00
NOTE: AM436A HPE DL785 Smart Array Controller cable option kit is included when ordered on the DL785 with CTO factory integration.
NOTE: AM436A HPE DL785 Smart Array Controller cable option kit is required when the controller is ordered without factory integration and not connected to the 468406-B21 HPE SAS Expander Card.
Smart Array P411 Controller
Optional Upgrades

NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array E500 is integrated outside of the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$95
$75.00

NOTE: For Smart Array P400 Controller only.
NOTE: If you install the 512MB DDR BBWC as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HPE SA-P400 and SA-E500 24 In Battery Cable Kit).
$166
$129.00

NOTE: For Smart Array P400 Controller only.
NOTE: If you install the Battery-backed write cache as an upgrade to a Smart Array P400/256MB Controller, you must also order part 417836-B21 (HPE SA-P400 and SA-E500 24 In Battery Cable Kit).
$201
$118.00

NOTE: Option kit not supported for factory integration.
NOTE: Supported on HPE Smart Array P212 Controller and P410 Controller only.
$41
$29.00

NOTE: Option kit not supported for factory integration.
NOTE: Supported on HPE Smart Array P212 Controller and P410 Controller only.
$173
$129.00

NOTE: Option kit not supported for factory integration.
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
$266
$156.00
SAS Controller Options

NOTE: Option kit not supported for factory integration.
NOTE: Enables a single Smart Array P410 Controller to control all of the embedded HDD's. Allows the configuration of a RAID array with up to 16 embedded HDD's. The Controller must be installed in PCIe Slot 1 and the Expander in PCIe Slot 2. The embedded SA P400i controller is not used.
NOTE: AM440A HPE DL785 SAS Expander cable option kit required.
NOTE: Requires SA P410 Controller with Cache memory.
$298
$175.00