HPE ProLiant DL320e Gen8 v2 Parts

1U rack serverIntel Xeon E3-1200 v3, Core i3 or Pentium

The HPE ProLiant DL320e Gen8 v2 is a short-depth 1U rack server for one Intel Xeon E3-1200 v3, Core i3 or Pentium processor, and it takes one kind of memory: DDR3 unbuffered ECC DIMMs (UDIMMs), 4 at most, not registered DIMMs. This page lists the 254 parts HPE's QuickSpecs have listed for it across editions, by part type.

  • 254 HPE-listed parts
  • 4 DIMM slots, up to 32GB
  • 4 SFF or 2 LFF drive bays
  • 2 PCIe 3.0 slots
  • Embedded 2-port 1GbE (NC332i)

Specifications: HPE QuickSpecs c04123146, version 27 (October 23, 2017), which HPE has retired. Memory and drive figures match the DL320e Gen8 v2 Memory and Drives pages.

Shop DL320e Gen8 v2 parts by type

More DL320e Gen8 v2 parts: chassis, expansion and enablement

Most ordered from this list

The parts on this page our customers order most, for any server.

  1. Memory669324-B218GB (1x8GB) Dual Rank x8 PC3- 12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
  2. Drives765466-B212TB SAS 12G Midline 7.2K SFF (2.5in) SC 512e HDD
  3. Drives652583-B21HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise Hard Drive
  4. Drives765455-B212TB SATA 6G Midline 7.2K SFF (2.5in) SC 512e Digitally Signed Firmware HDD
  5. Drives781518-B211.2TB SAS 12G Enterprise 10K SFF (2.5in) SC HDD
  6. Drives781516-B21600GB SAS 12G Enterprise 10K SFF (2.5in ) SC HDD
  7. Drives759208-B21300GB SAS 12G Enterprise 15K SFF (2.5in) SC HDD
  8. Network adapters652503-B21Ethernet 10Gb 2-port 530SFP Adapter
  9. Drives655708-B21500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline Hard Drive
  10. Drives655710-B211TB SATA 6G Midline 7.2K SFF (2.5in) SC Digitally Signed Firmware HDD

DL320e Gen8 v2 at a glance

Processors

One Intel Xeon E3-1200 v3 processor (model numbers ending in v3, such as E3-1220v3 or E3-1241v3), a Core i3-41xx (i3-4150, i3-4130 or i3-4130T) or a Pentium G3220, G3240 or G3420.

Memory

4 DIMM slots on 2 channels, for HPE DDR3 unbuffered ECC DIMMs (UDIMMs) from 2GB to 8GB, DDR3-1600 or DDR3-1333; no registered DIMMs and no non-ECC UDIMMs. Up to 32GB with 8GB DIMMs in all 4 slots, at 1600MHz.

Every processor HPE lists supports 1600MHz memory, except the Pentium G3220, which clocks it down to 1333MHz. HPE recommends identical pairs, the farthest slot first. DL320e Gen8 v2 Memory

Drives

4 SFF hot plug bays, or 2 LFF bays, hot plug or non-hot plug; the SFF and LFF models, and hot plug and non-hot plug LFF, cannot be converted into each other.

The embedded B120i runs SATA drives at 6Gb/s in the 2LFF models, and in the 4SFF model only with ports 0 and 1 in use; with more than 2 drives in the 4SFF model it runs them at 3Gb/s. Full 6Gb/s speed needs a Smart Array controller, and SAS drives need a SAS controller such as the Smart Array P222.

SAS hard drives and SAS SSDs can share the server only as two separate RAID 0 volumes. DL320e Gen8 v2 Drives

Storage controllers

The embedded HPE Dynamic Smart Array B120i SATA controller, RAID 0, 1 and 10 only; the Smart Array P222 (one internal, one external port), the P421 and P431 with external ports, and the H221 and H222 host bus adapters. DL320e Gen8 v2 Storage Controllers

Networking

The embedded HPE Ethernet 1Gb 2-port NC332i Adapter, PCIe network adapters and a dedicated 1Gb iLO port. DL320e Gen8 v2 Networking Adapters

Expansion

Two PCIe 3.0 slots: slot 1 full height, half length, x8 in an x16 connector; slot 2 low profile, x4 in an x8 connector.

Power

A 250W non-hot plug, non-redundant power supply as standard. HPE also lists a 750W Common Slot -48VDC supply, for the 4 SFF model only, which needs the DL320e Gen8 v2 CS FIO Enablement Kit.

Management

HPE iLO 4.

Specifications from HPE QuickSpecs c04123146, version 27 (October 23, 2017). Memory figures match the DL320e Gen8 v2 Memory page.

Before you order drives, make sure the server is a Gen8 v2, not a DL320e Gen8. The server's v2 is not the processor's: a DL320e Gen8 v2 runs Xeon E3 processors ending in v3 (E3-1220v3, E3-1241v3), a Core i3-41xx or a Pentium G3xxx; a DL320e Gen8 runs Xeon E3 processors ending in v2 (E3-1220v2, E3-1240v2), a Pentium G2xxx (G2120, G2100T) or, in earlier editions of its QuickSpecs, a Core i3-32xx. The Gen8 v2 has 4 SFF or 2 LFF drive bays, the Gen8 8 SFF or 4 LFF. Find the processor model in iLO under System Information › Processors.

Complete your DL320e Gen8 v2 build

DL320e Gen8, Gen8 v2 or DL320 Gen11? How to tell

The processor model number tells the three DL320 generations apart; the DL320e Gen8 and Gen8 v2 also differ in drive bays. The DL320e Gen8's kits are listed for the Gen8 v2 too, so they do not tell those two servers apart.

What to checkDL320e Gen8DL320e Gen8 v2 This pageDL320 Gen11
Processor model numbersXeon E3 ending in v2, Core i3-32xx or Pentium G2xxx: E3-1220v2, E3-1240v2, Pentium G2120Xeon E3 ending in v3, Core i3-41xx or Pentium G3xxx: E3-1220v3, E3-1241v3, i3-4150Xeon Scalable x4xx or x5xx: Gold 6430, Gold 6530
MemoryDDR3-1600 or DDR3-1333 UDIMM, 4 slotsDDR3-1600 or DDR3-1333 UDIMM, 4 slotsDDR5-4800 or DDR5-5600, 16 slots
Memory kits look like669322-B21, 669324-B21713977-B21, 713979-B21P43322-B21, P64705-B21
Parts pageDL320e Gen8 partsYou are hereDL320 Gen11 parts

From the HPE QuickSpecs of each server: HP ProLiant DL320e Generation 8 (Gen8) c04123220 version 34; HPE ProLiant DL320e Generation 8 (Gen8) v2 c04123146 version 27; HPE ProLiant DL320 Gen11 a50004315enw version 42.

All 254 DL320e Gen8 v2 parts

Grouped by part type; within each group the parts are in the order of HPE's QuickSpecs. Open a group, or type a part number or a few words to filter the whole list.

DL320e Gen8 v2 parts questions

How much memory does the DL320e Gen8 v2 support?

Up to 32GB: 8GB DDR3 unbuffered ECC DIMMs in all 4 slots, running at 1600MHz. Registered DIMMs and non-ECC DIMMs are not supported. Every processor HPE lists supports 1600MHz memory, except the Pentium G3220, which clocks it down to 1333MHz. HPE recommends installing memory in identical pairs.

Which drives fit the DL320e Gen8 v2?

SFF SC drives in the 4 SFF hot plug model and LFF SC drives in the 2 LFF hot plug model, in SAS or SATA, as hard drives or SSDs; HPE's LFF SSDs are SATA. For the 2 LFF non-hot plug model HPE lists non-hot plug LFF SATA drives. The embedded B120i runs SATA only, so SAS drives need a SAS controller such as the Smart Array P222.

Is my server a DL320e Gen8 v2 or a DL320e Gen8?

Check the processor model in iLO under System Information › Processors. A DL320e Gen8 v2 runs a Xeon E3 whose model number ends in v3 (such as E3-1220v3), a Core i3-41xx or a Pentium G3xxx; a DL320e Gen8 runs a Xeon E3 ending in v2 (such as E3-1220v2), a Pentium G2xxx (G2120, G2100T) or, in earlier editions of its QuickSpecs, a Core i3-32xx. The server's v2 is not the processor's v2. The drive bays differ too: 4 SFF or 2 LFF in the Gen8 v2, 8 SFF or 4 LFF in the Gen8.

Does DL320e Gen8 memory fit the DL320e Gen8 v2?

Yes: the DDR3 kits HPE lists for the DL320e Gen8 are listed for the Gen8 v2 too, the DDR3-1600 kits 669320-B21, 669322-B21 and 669324-B21 and the DDR3-1333 kits 647905-B21, 647907-B21 and 647909-B21. The low-voltage DDR3-1600 kits 713975-B21, 713977-B21 and 713979-B21 are listed for the Gen8 v2 only.

Are refurbished parts on this list too?

Yes. A refurbished part carries the same HPE part number as a new one, so it is listed here under that number, and each listing shows its condition. Every part ships tested or factory sealed.

What warranty comes with DL320e Gen8 v2 parts?

A replacement warranty of 1 to 5 years, depending on the part: memory is covered for 5 years, and many other parts for 1 or 3 years.

Other DL320 generations

DL320e Gen8 partsDL320 Gen11 partsDL320 Gen12 partsAll HPE parts by server model
Ships same dayMost orders ship the same business day
1 to 5 year warrantyTested or factory sealed
Purchase orders acceptedCard, P-card, ACH, wire or PayPal too
Drives161 parts

All drives on the DL320e Gen8 v2 Drives page

Hard Disk Drives - 2.5in SFF SAS

12G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise Drives
12G SAS Hot Plug SFF (2.5-inch) SC 512e Drives
12G SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
6G SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
6G SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives

Hard Disk Drives - 2.5in SFF SATA

6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Hot Plug SFF (2.5-inch) SC 512e Drives

Hard Disk Drives - 3.5in LFF SAS

12G SAS Hot Plug SmartDrive LFF (3.5-inch) Converter Enterprise Drives
12G SAS Hot Plug LFF (3.5-inch) SC HDD
12G SAS Hot Plug LFF (3.5-inch) Midline (MDL) 512e Drives
12G SAS Hot Plug LFF (3.5-inch) SC 512e Performance Drives
12G SAS Hot Plug LFF (3.5in) 7.2K MDLSC HDD
6G SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111744

Hard Disk Drives - 3.5in LFF SATA

6G SATA Hot Plug LFF (3.5-inch) SC 512e Performance Drives
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
6G SATA Hot Plug LFF (3.5-inch) Midline (MDL) 512e Drives
6G SATA Hot Plug LFF (3.5-inch) SC HDD
6G SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111725

Solid State Drives - 2.5in SFF SAS

12G SAS Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream H2 Solid State Drives
12G SAS Hot Plug SFF (2.5-inch) SC Write Intensive Solid State Drives
12G SAS SFF (2.5in) RI-3 SC Solid State Drives
12G SAS SFF (2.5in) MU-3 SC Solid State Drives

Solid State Drives - 2.5in SFF SATA

HPE notes (2)
  • The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
  • Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
6G SATA 2.5in WI-PLP SC SSD
6G SATA 2.5in MU-PLP SC SSD
6G SATA 2.5in RI-PLP SC SSD
6G SATA Hot Plug MU-3 SFF (2.5-inch) SC Solid State Drives
6G SATA Hot Plug RI-3 SFF (2.5-inch) SC Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) EV Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) SC EV Solid State Drives
6G SATA Hot Plug SFF Value Endurance (2.5-inch) SC Enterprise Value Solid State Drives
6G SATA Hot Plug SFF Value Endurance (2.5-inch) Enterprise Value G1 Solid State Drives
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value M1 Solid State Drive
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives

Solid State Drives - 3.5in LFF SATA

6G SATA 2.5in WI-PLP SCC SSD
6G SATA 2.5in MU-PLP SCC SSD
6G SATA 2.5in RI-PLP SCC SSD
6G SATA Hot Plug LFF (3.5-inch) RI-3 SCC SSD
6G SATA Hot Plug LFF (3.5-inch) MU-3 SCC SSD
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
6G SATA Value Endurance Hot Plug LFF (3.5-inch) SCC EV Solid State Drives
6G SATA Hot Plug LFF Value Endurance (3.5-inch) Converter Enterprise Value G1 Solid State Drives
6G SATA Hot Plug LFF Value Endurance (3.5-inch) SCC Enterprise Value Solid State Drives
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) SC Read Intensive Solid State Drives
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154378

Hard Drive Blank Kits

Hard Drive Kits
HPE notes (2)
  • The part numbers for single HDD blanks below are provided should the customer require replacement HDD blanks for their server.
  • The mixing of standard SAS drives with SAS SSD drives is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported.
Memory9 parts

All memory on the DL320e Gen8 v2 Memory page

HPE notes (2)
  • To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional information, please see the HPE SmartMemory QuickSpecs.
  • HPE memory from previous generation servers are not fully compatible with SmartMemory features in Gen8 Servers.
Unbuffered with ECC DIMMs (UDIMMs)
HPE notes (3)
  • All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: http://www.hp.com/go/ddr3memory-configurator.
  • Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://www.hp.com/go/proliant- energy-efficient.
  • PC3L is a low voltage memory.
Network adapters9 parts

All network adapters on the DL320e Gen8 v2 Networking Adapters page

  • J9834A HPE PS1810-24G Switch
Gigabit Ethernet Adapters
10 Gigabit Ethernet Adapters
HPE notes (2)
  • A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
  • Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/ProLiantNICs.

Storage controllers10 parts

All storage controllers on the DL320e Gen8 v2 Storage Controllers page

SAS Controllers

Smart Array P222 Controller
Smart Array P421 Controller
Smart Array P431 Controller
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111474 (Smart Array P222 Controller) https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111533 (Smart Array P421 Controller) https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111365 (Smart Array P431 Controller)

Host Bus Adapter
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111475 (HBA 221) https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111514 (HBA 222)

Optional Upgrades

Optical drives2 parts
Disk backup9 parts
HPE note

For the complete range of RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HPE disk backup products see: http://www.hp.com/storage/SPOCK.

HPE note

Please see the QuickSpecs for additional part numbers, Technical Specifications, and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111633

HPE RDX Removable Disk Backup System

  • B7B63A HPE RDX320 USB3.0 External Disk Backup System
  • B7B64A HPE RDX500 USB3.0 Internal Disk Backup System
  • B7B66A HPE RDX500 USB3.0 External Disk Backup System
  • B7B67A HPE RDX1000 USB3.0 Internal Disk Backup System
  • B7B69A HPE RDX1000 USB3.0 External Disk Backup System
Tape backup6 parts
Security2 parts
  • 488069-B21 HPE Trusted Platform Module Option
    HPE notes (3)
    • The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows BitLocker Drive Encryption (BitLocker) is a data protection feature available in Windows Server 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline. For more information about TPM, including a white paper, go to: http://www.hp.com/go/TPM.
    • ProLiant OS pre-installed units will come with the partition required for TPM deployment.
    • The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing the key could result in data loss.
  • 664918-B21 HPE 1U Security Bezel Kit
    HPE note

    The Entry Rack Ear FIO Kit (P/N: 723903-B21) needs to be purchased if a security bezel is installed

Rack options37 parts

All rack options on the DL320e Gen8 v2 Rack Options page

HPE LCD8500 1U Rackmount Console Kit Models
  • AF630A HP LCD8500 1U US Rackmount Console Kit
  • AF631A HP LCD8500 1U UK Rackmount Console Kit
  • AF632A HP LCD8500 1U DE Rackmount Console Kit
  • AF633A HP LCD8500 1U FR Rackmount Console Kit
  • AF642A HP LCD8500 1U JP Rackmount Console Kit
  • AF643A HP LCD8500 1U RU Rackmount Console Kit
  • AF644A HP LCD8500 1U INTL Rackmount Console Kit
  • AF645A HP LCD8500 1U US TAA Rackmount Console Kit
HPE LCD8500 1U Rackmount Console Kit Options
  • G7T29A HP Kit LCD 1.83m Latch Display Port Cable
  • TL052A HPE Location Discovery Services LCD8500 Kit
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154398

HPE USB Keyboard and Mouse
  • 631341-B21 HPE USB US Keyboard/Mouse Kit
  • 631344-B21 HPE USB UK Keyboard/Mouse Kit
  • 631346-B21 HPE USB FR Keyboard/Mouse Kit
  • 631348-B21 HPE USB ES Keyboard/Mouse Kit
  • 631358-B21 HPE USB DE Keyboard/Mouse Kit
  • 631360-B21 HPE USB JP Keyboard/Mouse Kit
  • 631362-B21 HPE USB IT Keyboard/Mouse Kit
  • 631364-B21 HPE USB CN Keyboard/Mouse Kit
  • 638212-B21 HPE USB AE Keyboard/Mouse Kit
  • 638214-B21 HPE USB RU Keyboard/Mouse Kit
  • 672097-D63 HPE USB IN Keyboard/Mouse Kit
  • 672097-B33 HPE USB INTL Keyboard/Mouse Kit
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04168349

Rail Kits

HPE TFT7600 G2 KVM Console and Monitor (TFT7600 G2)

  • AZ870A HPE TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
  • AZ885A HPE TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor

HPE Server Console Switches

HPE Server Console Switch G2 with Virtual Media & CAC

  • AF618A HPE 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
  • AF619A HPE 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
  • 336047-B21 HPE KVM CAT5 1-pack USB Interface Adapter

HPE 1x4 USB/PS2 KVM Console Switch

  • AF611A HPE 1x4 USB/PS2 KVM Console Switch
  • AF620A HPE 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
  • AF621A HPE 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
  • AF622A HPE 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
USB and SD options2 parts
HPE Flash Media Kits for USB Drives
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HPE note

Please see the QuickSpecs for Technical Specifications and additional information: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123175

Tape storage systems1 part
Disk enclosures5 parts
Disk storage systems1 part
Ships same dayMost orders ship the same business day
1 to 5 year warrantyReplacement coverage on every part
5,000+ five-star reviewsShopper Approved, BBB A+ rating
Ships to 120+ countriesBy UPS; duties are collected by the carrier

Building out several servers, or need a part not listed?

Send the part numbers and quantities for each server and we reply to every quote request within 24 hours. Live chat is the fastest way to reach us.

!