HPE ProLiant SL2x170z G6 Parts
Unique Options
$221
$188.00

NOTE: This is required when adding SAS hard drives using the P410 controller.
$108

NOTE: This is needed when adding more than two 2.5" hard drives.

NOTE: This is required when adding BBWC.

NOTE: This is required when adding SFF (2.5") SSD or hard drives.
$155
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$54
$38.00
$93
$65.00
$50
$39.00

NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$81
$65.00
$56
$39.00

NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
$56
$39.00
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
$57
$38.00
$66
$45.00
$67
$48.00
$237
$175.00
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFF drives.
NOTE: When adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HPE P212 SAS 4HDD Cable Kit 574001-B21.
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
Networking
Gigabit Ethernet Adapters
$161
$115.00
$72
$55.00
$111
$79.00
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
InfiniBand
I/O Expansion Options
$221
$188.00
Power Supplies
NOTE: - Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at:- (link)
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.

NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$244
$168.00
Rack Options

NOTE: This kit allows you to install HPE or 3rd party switch in the same rack as SL6000.
$98
$78.00
Storage Controllers

SAS Controllers
Smart Array P212 Controller
NOTE: HPE P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HPE P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
$94
$71.00
Smart Array P411 Controller
$270
$203.00
$500
$335.00
$522
$399.00
Optional Upgrades
NOTE: HPE z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)

NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00

NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
$173
$129.00

NOTE: To enable BBWC on the 256MB cache.
$207
$156.00
NOTE: Supported on HPE Smart Array P212 Controller.
$53
$39.00

HPE Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates Single Server License
NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HPE Software Technical Support Services.
$806
$650.00
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00
(SCSI HBA)
Storage Options
Storage Fibre Channel HBA
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Storage SCSI HBA

NOTE: Recommended HBA for MSL SCSI Tape Library connect.
$330
$248.00
Converged Network Adapter
$177
$129.00
Disk Storage Systems
Disk Enclosures
$1,231
$985.00
$411
$300.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Six-Core Processors
Quad-Core Processors
Dual-Core Processors

NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 and 5600 Series, the letter preceding the model number indicates the performance/wattage of the processor. X denotes High Performance/Wattage; E denotes Enterprise Performance/Wattage (Mainstream); and L denotes Lower Wattage.