HPE ProLiant DL345 Gen10 Plus Parts

2U rack serverOne AMD EPYC 7003 or 7xx2 processor

The HPE ProLiant DL345 Gen10 Plus is a 2U rack server for one AMD EPYC processor, a 7003 Series or 7xx2 model, and it takes one memory family: DDR4-3200 kits only, not the DDR5 kits of the DL345 Gen11 and Gen12. This page lists the 302 parts HPE's QuickSpecs have listed for it across editions, by part type.

  • 302 HPE-listed parts
  • 16 DIMM slots, up to 4TB
  • Up to 26 SFF or 12 LFF drives
  • Up to 4 PCIe 4.0 slots on 2 risers
  • Flex Slot power, 500W to 1800W-2200W

Specifications: HPE QuickSpecs a50002557enw, version 34 (December 2, 2024), which HPE has retired. Memory and drive figures match the DL345 Gen10 Plus Memory and Drives pages.

Shop DL345 Gen10 Plus parts by type

More DL345 Gen10 Plus parts: chassis, expansion and enablement

Most ordered from this list

The parts on this page our customers order most, for any server.

  1. DrivesP28352-B212.4TB SAS 12G Mission Critical 10K SFF BC 512e Multi Vendor HDD
  2. DrivesP40500-B213.84TB SATA 6G Read Intensive SFF BC Multi Vendor SSD
  3. Drives861686-B211TB SATA 6G Business Critical 7.2K LFF LP Multi Vendor HDD
  4. DrivesP28586-B211.2TB SAS 12G Mission Critical 10K SFF BC Multi Vendor HDD
  5. DrivesP40498-B21960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD
  6. DrivesP47808-B21960GB SATA 6G Read Intensive LFF LPC Multi Vendor SSD
  7. Drives881787-B2112TB SATA 6G Business Critical 7.2K LFF LP Helium 512e Multi Vendor HDD
  8. Power supplies865434-B21800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
  9. Drives861683-B214TB SATA 6G Business Critical 7.2K LFF LP Multi Vendor HDD
  10. DrivesP40505-B213.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD

DL345 Gen10 Plus at a glance

Processors

One AMD EPYC processor: a 7003 Series model (model number 7xx3) or one of the 7xx2 models HPE lists.

Processors ship without a heat sink: the Standard Heat Sink Kit below 180W, the High Performance Heat Sink Kit at 180W or more. The 280W models, EPYC 7763 and 75F3, also need the Maximum Performance Fan Kit, and HPE limits them to a 25°C ambient. DL345 Gen10 Plus Processors

Memory

16 DIMM slots on 8 channels, 2 per channel. DDR4-3200 kits only: RDIMMs from 8GB to 64GB, LRDIMMs of 128GB and 256GB. Up to 4TB with 256GB LRDIMMs in all 16 slots, or 1TB with 64GB RDIMMs.

RDIMMs and LRDIMMs do not mix, nor do x4 and x8 kits. With two DIMMs per channel, the 256GB kit, and any kit on a 7xx2 processor, runs at 2933 MT/s. 256GB DIMMs are not supported with 12LFF and are limited to a 25°C to 35°C ambient, depending on the chassis. DL345 Gen10 Plus Memory

Drives

Up to 26 SFF drives (24 front, 2 rear), or 12 LFF drives in the front plus 2 SFF at the rear. The 24SFF chassis needs one 12Gb SAS Expander Card, with a P816i-a, P408i-a or E208i-a controller. The 2 rear drives need the 2SFF rear backplane kit and the Maximum Performance Fan Kit.

The 8LFF chassis reaches 12 LFF with the 12LFF Smart Array SAS/SATA Cable Kit and a P816i-a controller, or with the 12LFF Tri-Mode Backplane Kit and MR controllers. Either way it needs the Maximum Performance Fan Kit.

Up to 26 U.3 NVMe drives: the NVMe drive cages fit only the 8SFF chassis and need the Maximum Performance Fan Kit. HPE also lists the NS204i-p NVMe boot device, which needs UEFI boot mode. DL345 Gen10 Plus Drives

Storage controllers

Embedded SR100i software RAID for up to 8 SATA drives or 2 U.3 NVMe SSDs, UEFI mode and Microsoft Windows Server only. Smart Array E208, P408 and P816i-a; tri-mode MR216i, MR416i, SR416i-a and SR932i-p. The cache controllers need the 96W Smart Storage Battery or the Smart Hybrid Capacitor. DL345 Gen10 Plus Storage Controllers

Networking

No embedded networking: networking comes from an OCP 3.0 or stand-up adapter. One OCP 3.0 slot, adapters up to 200GbE and a dedicated 1Gb iLO port.

100/200Gb adapters, except the Intel E810-CQDA2, and InfiniBand adapters need the Maximum Performance Fan Kit. The MCX562A 10/25Gb, InfiniBand HDR and Intel E810 100GbE OCP3 adapters need the OCP Upgrade Cable Kit (P39732-B21). DL345 Gen10 Plus Networking Adapters

Expansion

Two PCIe 4.0 slots on the primary riser, up to four with a secondary riser. More than two x16 cards need the x16 Secondary Riser Kit. Riser cards

Cooling

The 8SFF and 8LFF chassis ship without fans and need three Standard Fan Kits; the 24SFF chassis has six performance fans. The Maximum Performance Fan Kit, which cannot be combined with the standard kits, is required with 280W processors, any 12LFF configuration, the 2SFF rear cage, NVMe drive cages, 100/200Gb adapters other than the Intel E810-CQDA2, InfiniBand cards, accelerators and graphics cards. Fan kits

Power

Flex Slot hot-plug power supplies from 500W to 1800W-2200W, including -48VDC and 277VAC/380VDC models. The 1600W supplies need high line voltage (200VAC to 240VAC), and the 1600W -48VDC supply takes the 1600W -48VDC Power Cable Lug Kit. HPE does not support mixing two different power supplies. DL345 Gen10 Plus Power Supplies

Management

HPE iLO 5. Management hardware

Specifications from HPE QuickSpecs a50002557enw, version 34 (December 2, 2024). Memory figures match the DL345 Gen10 Plus Memory page.

Before you order memory or processors, check that the server is a Gen10 Plus. The last digit of the AMD EPYC model number tells you: a 2 or a 3 (EPYC 7302P, 7313P, 7443P) means a DL345 Gen10 Plus, which takes DDR4-3200 kits only. A 4 or a 5 after a 9 (EPYC 9354P, 9555P) means a DL345 Gen11 or Gen12, which take DDR5 kits; those processors and kits are not on this list. Find the model in iLO under System Information › Processors.

Gen10 Plus, Gen11 or Gen12? How to tell

The processor model number tells the DL345 Gen10 Plus from the Gen11 and Gen12, and the DIMM slot count tells the Gen11 from the Gen12. The generation decides the memory you can buy, though every Gen12 kit is also a Gen11 kit for 5th Gen processors.

What to checkDL345 Gen10 Plus This pageDL345 Gen11DL345 Gen12
Processor model numbers7xx2 or 7xx3: EPYC 7302P, 7313P, 7443P9xx4 or 9xx5: EPYC 9124, 9354P, 9555P9xx5 only: EPYC 9555P, 9965
MemoryDDR4-3200, 16 slotsDDR5-4800 or DDR5-6400, 12 slotsDDR5-6400, 24 slots
Memory kits look likeP07640-B21, P07646-B21P50312-B21, P64985-B21P64986-B21, P73446-B21
Parts pageYou are hereDL345 Gen11 partsDL345 Gen12 parts

From the HPE QuickSpecs of each server: HPE ProLiant DL345 Gen10 Plus a50002557enw version 34; HPE ProLiant DL345 Gen11 a50004298enw version 41; HPE ProLiant Compute DL345 Gen12 a50009233enw version 13.

All 302 DL345 Gen10 Plus parts

Grouped by part type; within each group the parts are in the order of HPE's QuickSpecs. Open a group, or type a part number or a few words to filter the whole list.

DL345 Gen10 Plus parts questions

How much memory does the DL345 Gen10 Plus support?

Up to 4TB: 256GB DDR4-3200 LRDIMMs in all 16 slots. With registered DIMMs the maximum is 1TB (64GB in every slot). RDIMMs and LRDIMMs do not mix, and neither do x4 and x8 kits. With two DIMMs per channel, the 256GB kit, and any kit on a 7xx2 processor, runs at 2933 MT/s. HPE does not support 256GB DIMMs in the 12LFF configuration, and limits them to a 35°C ambient with 8SFF or 8 NVMe drives, 30°C with 8LFF, 24SFF, 16SFF or 16 NVMe, and 25°C with 24 NVMe.

Which drives fit the DL345 Gen10 Plus?

2.5-inch SFF drives on HPE's Basic Carrier (BC) in SAS, SATA or NVMe (U.3 and U.2); 3.5-inch LFF LP hard drives in SAS or SATA and LFF LPC SSDs; and SATA M.2 SSDs on the M.2 enablement kit. The drive cage and the controller decide which interfaces work: without a tri-mode controller, the U.3 NVMe cages take NVMe drives only. The largest rear NVMe drives, 7.68TB and 15.36TB, are limited to a 30°C or 35°C ambient, depending on the chassis.

How do I tell which EPYC processor my DL345 Gen10 Plus has?

Read the processor model in iLO under System Information › Processors. A last digit of 3 (EPYC 7313P, 7443P) is a 7003 Series processor; a last digit of 2 (EPYC 7302P) is one of the 7xx2 models HPE lists. Both take the same DDR4-3200 kits, but with two DIMMs per channel a 7xx2 processor runs them at 2933 MT/s.

Is my server a DL345 Gen10 Plus, a Gen11 or a Gen12?

Check the processor model number. A last digit of 2 or 3 (7xx2 or 7xx3, such as EPYC 7313P) means a DL345 Gen10 Plus, with DDR4-3200 memory in 16 slots. A 9 with a last digit of 4 or 5 (9xx4 or 9xx5, such as EPYC 9354P or 9555P) means a DL345 Gen11 or Gen12, with DDR5 memory. Those two share the 9xx5 processors, so count the DIMM slots: 12 on the Gen11, 24 on the Gen12. Every Gen12 memory kit is also a Gen11 kit for 5th Gen processors, but the Gen11's DDR5-4800 kits are not Gen12 kits, so buy memory and processors from the page for your generation.

Are refurbished parts on this list too?

Yes. A refurbished part carries the same HPE part number as a new one, so it is listed here under that number, and each listing shows its condition. Every part ships tested or factory sealed.

What warranty comes with DL345 Gen10 Plus parts?

A replacement warranty of 1 to 5 years, depending on the part: memory is covered for 5 years, and many other parts for 1 or 3 years.

Other DL345 generations

Ships same dayMost orders ship the same business day
1 to 5 year warrantyTested or factory sealed
Purchase orders acceptedCard, P-card, ACH, wire or PayPal too
Drives152 parts

All drives on the DL345 Gen10 Plus Drives page

Hard Disk Drives - 2.5in SFF SAS

SED (Self-Encryption Drive) Hard Drives
HPE note

Requirements for MR Tri-Mode controller SED support TPM is not required for Local Key Management as key is stored in controller iLO Advanced is required for Remote Key Management. Key is stored in remote key manager (Ex. ESKM)

Hard Disk Drives - 2.5in SFF SATA

Hard Disk Drives - 3.5in LFF SAS

Enterprise - 12G SAS – SFF/LFF Drives
Midline - 12G SAS - LFF Drives

Hard Disk Drives - 3.5in LFF SATA

Midline - 6G SATA - LFF Drives

Solid State Drives - 2.5in SFF SAS

Read Intensive - 12G SAS - SFF - Solid State Drives
Mixed Use - 12G SAS - SFF - Solid State Drives

Solid State Drives - 2.5in SFF SATA

Mixed Use - 6G SATA - SFF - Solid State Drives
Read Intensive - 6G SATA - SFF - Solid State Drives
SED (Self-Encryption Drive)
HPE Disk-Based Backup

Solid State Drives - 3.5in LFF SAS

Mixed Use SAS – LFF- Solid State Drives

Solid State Drives - 3.5in LFF SATA

Read Intensive - 6G SATA - LFF – Solid State Drives

Solid State Drives - SATA M.2

Internal Dual M.2 Kit
Read Intensive - M.2 - Solid State Drives

Solid State Drives - 2.5in SFF NVMe

Read Intensive - NVMe - SFF - Solid State Drives
Mixed Use - NVMe - SFF - Solid State Drives
SED (Self-Encryption Drive) – NVMe SFF
  • P61043-B21 HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P61051-B21 HPE 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P61059-B21 HPE 6.4TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P61019-B21 HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P61027-B21 HPE 3.84TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
  • P61035-B21 HPE 7.68TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 Self-encrypting FIPS 140-3 CM7 SSD
HPE note

Requirements for Direct Attach SED support TPM2.0 is required for Local Key Management. Keys will be locally encrypted and stored by TPM iLO Advanced is required for Remote Key Management. Key is stored in remote key manager (Ex. ESKM) Requirements for MR Tri-Mode controller SED support TPM is not required for Local Key Management as key is stored in controller iLO Advanced is required for Remote Key Management. Key is stored in remote key manager (Ex. ESKM)

Hard Drive Blank Kits

Memory8 parts
Network adapters37 parts

All network adapters on the DL345 Gen10 Plus Networking Adapters page

1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
10/25 Gigabit Ethernet adapters
100/200 Gigabit Ethernet adapters
HPE notes (4)
  • Above 100/200 Gb cards require the selection of Max Perf Fan Kit (P14608-B21). Except for P21112- B21. P21112-B21 doesn’t need a Max Perf Fan Kit and no ambient temp. restrictions.
  • Customer must select HPE DL345 Gen10P x16 Secondary Riser Kit (P38641-B21), if more than two x16 PCIe cards are selected.
  • A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
  • Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
OCP Adapters
HPE notes (3)
  • OCP adapters do not consume PCIe slot.
  • Only 1 slot is available for OCP adapters.
  • Only SFF OCP adapters below 35W can be supported
HPE InfiniBand
HPE note

Max Performance Fan Kit (P14608-B21) is required to support InfiniBand cards. No ambient temperature limitation.

Pensando Distributed Services Card (DSC)
  • P26966-B21 Pensando Distributed Services Platform DSC-25 Enterprise 10/25Gb 2-port SFP28 Card
    HPE note

    Each card instance requires one RTU license of Silver or Platinum software. In case of more than one adapter, RTU licenses doesn’t need to be of the same part number.

Storage controllers15 parts

All storage controllers on the DL345 Gen10 Plus Storage Controllers page

  • P39271-B21 HPE ProLiant DL345 Gen10 Plus Smart Array to NVMe Adapter Kit
    HPE note

    Used to support up to 16 NVMe drives with Modular Controller (AROC). This kit cannot be selected as standalone. Must be selected only if below any one of the option is in the order o HPE DL345 Gen10P U.3 16NVMe DA FIO kit (P38649-B21) o HPE DL345 Gen10P U.3 24NVMe DA FIO Kit (P38650-B21)

  • P39270-B21 HPE ProLiant DL345 Gen10 Plus 12Gb SAS Expander Card
    HPE note

    This option cannot be selected with 8 LFF or 8 SFF CTO chassis. Max= 1 of this option must be selected with a 24 SFF CTO chassis. If this option is selected then P816i-a/P408i-a/E208i-a controller must be selected. This option can only be supported in the default primary riser.

HPE Smart Array Controllers
Essential RAID Controllers
SmartRAID Gen10 Plus Controllers
MegaRAID Gen10 Plus Controllers
HPE note

If one of these controllers P816i-a/ P408e-p/P408i-a/P408i-p/SR932i-p/MR416i-p/MR416i- a/SR416i-a is selected then either 96W Smart Storage Battery (P01366-B21) or Smart Hybrid Capacitor (P02377-B21) must be selected. Max = 1 Storage Battery/ Capacitors per server.

Drive cages and backplanes8 parts
Hard Drive Kits
  • P38652-B21 HPE ProLiant DL345 Gen10 Plus 8SFF BC Box 1-2 Drive Cage Kit
    HPE note

    This is supported only in 8SFF CTO chassis. This supports 8 SAS/SATA SFF Drives. Mixing of LFF & SFF drive cage is not allowed. Customer can select Min 0 or Max 1 of 8SFF Bay1/2 drive cage.

  • P38653-B21 HPE ProLiant DL345 Gen10 Plus 12LFF Smart Array SAS/SATA Cable Kit
    HPE note

    This is supported only in 8LFF CTO chassis. This supports 4 SAS/SATA LFF Drives. Mixing of LFF & SFF drive cage is not allowed. Customer can select Min 0, Max 1 of HPE DL345 Gen10+ 12LFF SA SAS/SATA Kit (P38653-B21) This option requires the selection of Max Perf Fan Kit (P14608-B21). If this kit is selected then P816i-a controller must be selected.

  • P26931-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 Tri-Mode 24G U.3 BC Front Drive Cage Kit
    HPE note

    Mixing of LFF & SFF drive cage is not allowed. This drive cage kit requires Max Performance fan kit. 8SFF NVMe U.3/U.2 drive cage kits can only be selected with the 8SFF CTO chassis. 8SFF NVMe x1 U.3 drive cage /8SFF NVMe x4 U.3 drive cage and 8SFF NVMe x4 U.2 drive cage cannot be selected together. 8SFF NVMe x1 U.3 drive cage and 8SFF NVMe x4 U.3 drive cage cannot be selected together. If 3qty of NVMe drive cage from the below list are selected then HPE 8SFF Front Remove SPEC Perf FIO (873763-B21) must be selected. o 8SFF NVME x1 U.3 drive cage (P27194-B21) o 8SFF NVME x4 U.3 drive cage (P26931-B21) o 8SFF NVME x4 U.2 drive cage (P26932-B21) If 8SFF NVME x1 U.3 /8SFF NVME x4 U.3 drive cage is selected along with Trimode Controller then 8SFF NVME x1 U.3 /8SFF NVME x4 U.3 drive cage can support SAS/SATA SFF and NVMe U.3 drives. If two q’ty of 8SFF NVME x4 U.3 drive cage or 8SFF NVMe x4 U.2 cage and SR932i-p are selected then HPE DL345 Gen10+ x16 Sec Riser Kit (P38641-B21) must be selected. If two q’ty of 8SFF NVME x4 U.3 drive cage or 8SFF NVMe x4 U.2 cage and MR416i-P / MR216i-P are selected then HPE DL345 Gen10+ x16 Sec Riser Kit (P38641-B21) or HPE DL345 Gen10P 2x8 SEC riser Kit (P38637-B21) must be selected. If 8SFF NVMe x1 U.3/8SFF NVMe x4 U.3 drive cage is selected along with a Tri-Mode Controller then SAS/SATA/NVMe U.3 drives can be selected. If 8SFF NVMe x1 U.3/8SFF NVMe x4 U.3 drive cage is selected without a Tri-Mode Controller then only NVMe U.3 drives can be selected. NVMe Direct attach will be used to support NVMe U.3 drives if Tri-Mode controller is not selected.

  • P27194-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF x1 Tri-Mode 24G U.3 BC Front Drive Cage Kit
    HPE note

    Mixing of LFF & SFF drive cage is not allowed. This drive cage kit requires Max Performance fan kit. 8SFF NVMe U.3/U.2 drive cage kits can only be selected with the 8SFF CTO chassis. 8SFF NVMe x1 U.3 drive cage /8SFF NVMe x4 U.3 drive cage and 8SFF NVMe x4 U.2 drive cage cannot be selected together. 8SFF NVMe x1 U.3 drive cage and 8SFF NVMe x4 U.3 drive cage cannot be selected together. If 3qty of NVMe drive cage from the below list are selected then HPE 8SFF Front Remove SPEC Perf FIO (873763-B21) must be selected. o 8SFF NVME x1 U.3 drive cage (P27194-B21) o 8SFF NVME x4 U.3 drive cage (P26931-B21) o 8SFF NVME x4 U.2 drive cage (P26932-B21) If 8SFF NVME x1 U.3 /8SFF NVME x4 U.3 drive cage is selected along with Tri-Mode Controller then 8SFF NVME x1 U.3 /8SFF NVME x4 U.3 drive cage can support SAS/SATA SFF and NVMe U.3 drives. Tri-Mode AROC controller can be selected only with 8SFF NVME x1 U.3 drive cage (P27194-B21). If 8SFF NVME x1 U.3 drive cage (P27194-B21) is selected then Tri-Mode controller must be selected. If 8SFF NVMe x1 U.3/8SFF NVMe x4 U.3 drive cage is selected along with a Tri-Mode Controller then SAS/SATA/NVMe U.3 drives can be selected. If 8SFF NVMe x1 U.3/8SFF NVMe x4 U.3 drive cage is selected without a Tri-Mode Controller then only NVMe U.3 drives can be selected. NVMe Direct attach will be used to support NVMe U.3 drives if Tri-Mode controller is not selected.

  • P26932-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 NVMe 16G U.2 BC Front Drive Cage Kit
    HPE note

    Mixing of LFF & SFF drive cage is not allowed. This drive cage kit requires Max Performance fan kit. 8SFF NVMe U.3/U.2 drive cage kits can only be selected with the 8SFF CTO chassis. 8SFF NVMe x1 U.3 drive cage /8SFF NVMe x4 U.3 drive cage and 8SFF NVMe x4 U.2 drive cage cannot be selected together. If 3qty of NVMe drive cage from the below list are selected then HPE 8SFF Front Remove SPEC Perf FIO (873763-B21) must be selected. o 8SFF NVME x1 U.3 drive cage (P27194-B21) o 8SFF NVME x4 U.3 drive cage (P26931-B21) o 8SFF NVME x4 U.2 drive cage (P26932-B21) If 8SFF NVMe x4 U.2 drive cage and 2SFF U.3 drive cage are selected together then 2SFF U.3 drive cage can support only SAS/SATA SFF drives. If two q’ty of 8SFF NVME x4 U.3 drive cage or 8SFF NVMe x4 U.2 cage and SR932i-p are selected then HPE DL345 Gen10+ x16 Sec Riser Kit (P38641-B21) must be selected. If two q’ty of 8SFF NVME x4 U.3 drive cage or 8SFF NVMe x4 U.2 cage and MR416i-P / MR216i-P are selected then HPE DL345 Gen10+ x16 Sec Riser Kit (P38641-B21) or HPE DL345 Gen10P 2x8 SEC riser Kit (P38637-B21) must be selected. If 8SFF NVMe x4 U.2 drive cage is selected then only NVMe U.3 / NVMe U.2 drives can be selected.

  • P38654-B21 HPE ProLiant DL345 Gen10 Plus 2SFF U.3 BC Front/Rear Backplane Kit
    HPE note

    This kit supports 2x NVMe U.3/SAS/SATA drives in rear. Customer can select Min 0, Max 1 of 2SFF U.3 Drive cage (P38654-B21). If 8SFF NVMe x4 U.2 drive cage and 2SFF U.3 drive cage are selected together then 2SFF U.3 drive cage can support only SAS/SATA SFF drives. This option requires the selection of Max Perf Fan Kit (P14608-B21).

  • P55516-B21 HPE ProLiant DL38x Gen10 Plus 8SFF SAS/SATA to Tri-Mode Controller Backplane Kit
    HPE note

    This kit supports 8x NVMe U.3/SAS/SATA drives.

  • P57819-B21 HPE ProLiant DL345 Gen10 Plus 12LFF SAS/SATA Tri-Mode Backplane Kit
    HPE note

    This kit supports 4x SAS/SATA drives. Requires 8LFF CTO server in the order, to support 12 LFF at the front with MR(MegaRAID) controllers.

Riser cards4 parts
  • P38637-B21 HPE ProLiant DL345 Gen10 Plus x16 Slimline Primary Riser Kit
    HPE note

    This riser must be selected only if HPE DL345 Gen10P U.3 24NVMe DA FIO Kit is in the order The HPE DL345 Gen10 Plus x16 Slimline Primary Riser Kit and HPE DL345 Gen10P 2x8 Secondary Riser Kit or HPE DL345 Gen10P x16 Secondary Riser Kit cannot be selected and vice versa. Max= 2 of the below riser can be selected o HPE DL345 Gen10P 2x8 Slimline SEC riser Kit o HPE DL345 Gen10P x16 Slimline Primary riser Kit

  • P38639-B21 HPE ProLiant DL345 Gen10 Plus x8/x8 Secondary Riser Kit
    HPE note

    Max= 1 of the below riser can be selected. o HPE DL345 Gen10P 2x8 SEC riser Kit P38639-B21 o HPE DL345 Gen10P x16 SEC riser Kit P38641-B21 The HPE DL345 Gen10 Plus x16 Slimline Primary Riser Kit and HPE DL345 Gen10P 2x8 Secondary Riser Kit or HPE DL345 Gen10P x16 Secondary Riser Kit cannot be selected and vice versa.

  • P38641-B21 HPE ProLiant DL345 Gen10 Plus x16 Secondary Riser Kit
    HPE note

    Max= 1 of the below riser can be selected. o HPE DL345 Gen10P 2x8 SEC riser Kit P38639-B21 o HPE DL345 Gen10P x16 SEC riser Kit P38641-B21 The HPE DL345 Gen10 Plus x16 Slimline Primary Riser Kit and HPE DL345 Gen10P 2x8 Secondary Riser Kit or HPE DL345 Gen10P x16 Secondary Riser Kit cannot be selected and vice versa.

  • P38643-B21 HPE ProLiant DL345 Gen10 Plus x8/x8 Slimline Secondary Riser Kit
    HPE note

    This riser must be selected only if HPE DL345 Gen10P U.3 24NVMe DA FIO Kit is in the order The HPE DL345 Gen10 Plus x16 Slimline Primary Riser Kit and HPE DL345 Gen10P 2x8 Secondary Riser Kit or HPE DL345 Gen10P x16 Secondary Riser Kit cannot be selected and vice versa. Max= 2 of the below riser can be selected o HPE DL345 Gen10P 2x8 Slimline SEC riser Kit o HPE DL345 Gen10P x16 Slimline Primary riser Kit

Power supplies10 parts

All power supplies on the DL345 Gen10 Plus Power Supplies page

HPE Power Supplies
HPE notes (5)
  • Flex Slot universal power supplies support power efficiency of up to 94% and support both 277VAC/380VDC power inputs.
  • Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and include a C-14 power inlet connector that can support HPE Power Discovery Services (blue connector).
  • All power supplies in a server should match. Mixing Power Supplies is not supported.
  • Option kits contain the specified power supply and a PDU IEC cable.
  • 1600W power supplies only support high line voltage.
Processors26 parts

All processors on the DL345 Gen10 Plus Processors page

Processor Option Kits
HPE notes (2)
  • Processors with greater than or equal to 180W will need the High Performance heatsink.
  • Processors equal to 280W will require the Max Performance fan kit.

Heat Sinks

  • P38656-B21 HPE ProLiant DL345 Gen10 Plus Standard Heat Sink Kit
    HPE note

    Heatsink is not included in the processor kit. Need to be selected separately Must be selected if processor is less than 180W

  • P38655-B21 HPE ProLiant DL345 Gen10 Plus High Performance Heat Sink Kit
    HPE note

    Heatsink is not included in the processor kit. Need to be selected separately Must be selected if processor is equal to or higher than 180W

AMD EPYC 2nd Generation Processors

  • P39734-B21 AMD EPYC 7702P 2.0GHz 64-core 200W Processor Kit for HPE ProLiant DL345 Gen10 Plus
  • P39736-B21 AMD EPYC 7402P 2.8GHz 24-core 180W Processor Kit for HPE ProLiant DL345 Gen10 Plus
Cable kits14 parts
HPE Cable Options
  • P38657-B21 HPE ProLiant DL345 Gen10 Plus Tri-Mode Premium Cable Kit
    HPE note

    If one q’ty of 8SFF NVMe x4 U.3 drive cage is selected, then this cable kit must be selected If one or two q’ty of 8SFF NVMe x4 U.2 drive cage is selected, then this cable kit must be selected

  • P39720-B21 HPE ProLiant DL345 Gen10 Plus 8SFF SATA Box 3 Cable Kit
    HPE note

    If 8SFF CTO chassis is selected and drives are direct attach, then this cable kit must be selected

  • P39722-B21 HPE ProLiant DL345 Gen10 Plus 8SFF SAS/SATA Box 3 Cable Kit
    HPE note

    If 8SFF CTO chassis is selected and PCIe smart array controller is in use, then this cable kit must be selected

  • P39723-B21 HPE ProLiant DL345 Gen10 Plus 8SFF AROC x8 SAS/SATA Box 3 Cable Kit
    HPE note

    If 8SFF CTO chassis is selected and AROC smart array controller is in use, then this cable kit must be selected

  • P39726-B21 HPE ProLiant DL345 Gen10 Plus 8SFF AROC x16 SAS/SATA Box 1-3 Cable Kit
    HPE note

    If 8SFF CTO chassis and 8SFF Bay1/2 drive cage are selected with an AROC smart array controller in use, then this cable kit must be selected

  • P39728-B21 HPE ProLiant DL345 Gen10 Plus 8LFF Embedded SATA Cable Kit
    HPE note

    If 8LFF CTO chassis is selected and drives are direct attach, then this cable kit must be selected

  • P39730-B21 HPE ProLiant DL345 Gen10 Plus 8LFF Smart Array SAS/SATA Cable Kit
    HPE note

    If 8LFF CTO chassis is selected and AROC smart array controller is in use, then this cable kit must be selected

  • P40652-B21 HPE ProLiant DL345 Gen10 Plus 2SFF SAS/SATA Rear Cable Kit
    HPE note

    If 2SFF U.3 drive cage is selected and SAS/SATA drives are selected with it, then this cable kit must be selected

  • P40654-B21 HPE ProLiant DL345 Gen10 Plus 2SFF NVMe Cable Kit
    HPE note

    If 2SFF U.3 drive cage is selected and NVMe U.3 drives are selected with it, then this cable kit must be selected

  • P39732-B21 HPE ProLiant DL325 Gen10 Plus v2/DL345 Gen10 Plus OCP Upgrade Cable Kit
    HPE note

    OCP Upgrade Kit (P39732-B21) must be selected If any of the below option is selected: HPE 10/25GbE 2p SFP28 MCX562A OCP3 Adapter (P10112-B21) HPE IB HDR/EN 200Gb 2p QSFP56 OCP3 Adapter (P31348-B21) HPE IB HDR/EN 200Gb 1p QSFP56 OCP3 Adapter (P31323-B21) INT E810 100GbE 2p QSFP28 OCP3 Adapter (P22767-B21)

  • P36203-B21 HPE ProLiant DL300 Gen10 Plus 2U x2 Tri-Mode Cable Kit
    HPE note

    This cable provides x1 or x2 connection to configurations with either one or two 8SFF NVMe x4 U.3 drive cage(s) selected

  • P58900-B21 HPE ProLiant DL38x LFF SAS/SATA Tri-Mode Cable Kit
    HPE note

    If 8SFF Model-X and 8SFF UBM2/TM drive cage (P55516-B21) are in the order, then this cable kit must be selected.

  • P55471-B21 HPE ProLiant DL38x Gen10 Plus 2SFF Rear Tri-Mode Cable Kit
    HPE note

    this cable kit can be selected with 24SFF Model-X only

  • P38663-B21 HPE ProLiant DL345 Gen10 Plus GPU Power Cable Kit
    HPE note

    This cable kit is required when Nvidia A10 graphics accelerator is selected

Fibre Channel HBAs10 parts
Boot devices2 parts
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
  • P21868-B21 HPE 32GB microSD RAID 1 USB Boot Drive
    HPE note

    In vSphere 7.0, VMware made changes that impact the use of an SD Card/USB media as a standalone boot device and will be removing support for them after version 7.x. SD Card/USB media can still be used as a standalone boot option through all 7.x releases via published Customer Advisory Usage of SD Card/USB Devices As Standalone Boot Devices Has Changed Due to System Storage Changes For VMware ESXi 7.0 (Or Later). For any major release beyond VMware ESXi 7.x, VMware will require M.2 or another local persistent device as the standalone boot option.

Smart Storage battery3 parts
HPE note

1 of either Smart Storage Battery (P01366-B21) or Smart Hybrid Capacitor (P02377-B21) can be selected in the order

  • P38630-B21 HPE ProLiant DL345 Gen10 Plus Smart Storage Battery Cable Kit
    HPE note

    Max=3, this option can be selected only with either 96W Smart Storage Battery or Smart Hybrid Capacitor

Optical drives1 part
Optical media1 part
Security4 parts
Rack options3 parts
Rail Kits
HPE notes (2)
  • Easy Install rail kits contain telescoping rails which allow for in-rack serviceability.
  • CTO Models do not ship with rail kits, they need to be ordered separately
  • P22018-B21 HPE DL38X Gen10 Plus 2U SFF Easy Install Rail Kit
    HPE note

    Supported on SFF Model only

  • P22019-B21 HPE DL38X Gen10 Plus 2U LFF Easy Install Rail Kit
    HPE note

    Supported on LFF Model only

  • P22020-B21 HPE DL38X Gen10 Plus 2U Cable Management Arm for Rail Kit
Management hardware1 part
Fan kits2 parts
  • P37042-B21 HPE ProLiant DL300 Gen10 Plus 2U Standard Fan Kit
    HPE note

    3 q’ty of Standard Fan Kit (P37042-B21) must be selected if 8LFF CTO chassis or 8SFF CTO chassis is in the order. Standard Fan Kit (P37042-B21) and Max Perf Fan Kit (P14608-B21) cannot be selected together

  • P14608-B21 HPE DL38X Gen10 Plus Maximum Performance Fan Kit
    HPE note

    Maximum 1 set of Maximum Performance Fan Kit can be supported Max Perf Fan Kit (P14608-B21) must be selected if any of the below options is in the order AMD EPYC 7763 (280W) (P38696-B21) AMD EPYC 75F3 (280W) (P38708-B21) 12LFF AROC SAS/SAT kit (P38653-B21) 2SFF U.3 HDD Kit (P38654-B21) NVME x1 U.3 drive cage (P27194-B21) NVME x4 U.3 drive cage (P26931-B21) NVME x4 U.2 drive cage (P26932-B21) MLX MCX515A-CCAT Adapter (P31246-B21) MLX MCX623106AS 100GbE 2p QSFP56 Adapter (P25960-B21) MLX MCX623105AS 200GbE 1p QSFP56 Adapter (P10180-B21) InfiniBand Cards PCIe Accelerators Graphics cards Standard Fan Kit (P37042-B21) and Max Perf Fan Kit (P14608-B21) cannot be selected together

GPUs1 part
HPE Computation and Graphics Accelerator
  • R9W59C NVIDIA A10 24GB PCIe Non-CEC Accelerator for HPE
Ships same dayMost orders ship the same business day
1 to 5 year warrantyReplacement coverage on every part
5,000+ five-star reviewsShopper Approved, BBB A+ rating
Ships to 120+ countriesBy UPS; duties are collected by the carrier

Building out several servers, or need a part not listed?

Send the part numbers and quantities for each server and we reply to every quote request within 24 hours. Live chat is the fastest way to reach us.