HPE ProLiant DL345 Gen10 Plus Parts

The HPE ProLiant DL345 Gen10 Plus is HPE's 1P 2U AMD platform — one EPYC processor feeding 16 DIMM slots, PCIe 4.0 risers, and front ends that run from 8 LFF spindles to 26 SFF bays. HPE builds it for virtualization, High Performance Compute, and memory-centric workloads. Every part below is genuine HPE, available new and refurbished, and tested for compatibility before it ships. Live pricing for each part number appears in the tables further down this page.

DL345 Gen10 Plus Platform at a Glance

• Processors: one AMD EPYC processor — the option kits run from 8 cores to 64 cores at 120W to 280W, covering EPYC 7003 Series parts and 7xx2 models
• Memory: 16 DIMM slots, 8 channels per processor, 2 DIMMs per channel, DDR4-3200 — a stated maximum of 1.0TB RDIMM and 4.0TB LRDIMM
• Storage: 8 SFF, 24 SFF with a 2 SFF rear cage for 26 SFF total, or 8 LFF and 12 LFF chassis on SAS/SATA
• Expansion: PCIe 4.0 throughout — the default primary riser carries two x16 full-height full-length slots, and a secondary riser adds x8/x8 or a single x16
• Networking: no network ports standard — the QuickSpecs give a choice of OCP or stand-up card, and only one OCP slot is available
• Power: HPE Flex Slot hot-plug supplies from 500W up to the 1800W–2200W Titanium kit
• Management: HPE iLO 5 with Intelligent Provisioning, a dedicated 1Gb iLO port, and a front iLO service port

Remember this is a single-processor server. One AMD EPYC processor feeds all 16 DIMM slots and every PCIe 4.0 riser slot, and there is no second socket to populate. The QuickSpecs also list network ports as none, so every build needs an OCP 3.0 or PCIe stand-up adapter.

Full platform detail is in the official HPE DL345 Gen10 Plus QuickSpecs.

Shop DL345 Gen10 Plus Parts by Category

• DL345 Gen10 Plus Memory — DDR4-3200 Registered and Load Reduced kits from 8GB to 256GB
• DL345 Gen10 Plus Drives — Basic Carrier SAS, SATA, and NVMe U.3/U.2 in SFF, plus LFF spindles
• DL345 Gen10 Plus Storage Controllers — Smart Array SR Gen10, MegaRAID Gen10 Plus, and SmartRAID Gen10 Plus
• DL345 Gen10 Plus Networking Adapters — 1GbE to 200GbE plus InfiniBand, in PCIe and OCP 3.0
• DL345 Gen10 Plus Power Supplies — Flex Slot Platinum, Titanium, Universal, and 48VDC kits
• DL345 Gen10 Plus Processors — AMD EPYC processor kits and both heat sink options

Comparing platforms? See DL345 Gen11 parts, or the sibling AMD platforms DL385 Gen10 Plus v2 parts and DL325 Gen10 Plus v2 parts. Our guide to how Gen10 and Gen11 compare covers the jump, or browse all HPE parts by server model.

DL345 Gen10 Plus Parts FAQ

What is the HPE ProLiant DL345 Gen10 Plus?
It is HPE's 1P, 2U AMD EPYC server. The QuickSpecs describe it as a purpose-built platform for virtualization, High Performance Compute, and memory-centric workloads, with PCIe Gen4 expansion and memory speeds up to 3200 MT/s.

How many processors does the DL345 Gen10 Plus take?
One. It is a 1P server, so a single AMD EPYC processor feeds all 16 DIMM slots and every PCIe 4.0 riser slot. There is no second socket to populate.

How much memory does the DL345 Gen10 Plus support?
The QuickSpecs give two figures. Maximum capacity for RDIMM is 1.0 TB, listed as 16 x 64 GB at 3200 MT/s. Maximum capacity for LRDIMM is 4.0 TB, listed as 16 x 256 GB. A separate note on the processor table states that all AMD EPYC processors can support up to 4TB of memory each.

What drives does the DL345 Gen10 Plus accept?
That depends on the chassis. The 24 SFF chassis takes 24 SFF drives in front plus a 2 SFF rear cage for 26 total; the 8 LFF chassis is upgradeable to 12 LFF in front plus 2 SFF in the rear. SFF drives use the Basic Carrier and cover SAS, SATA, and NVMe U.3/U.2.

Does the DL345 Gen10 Plus have built-in network ports?
No. The Interfaces table lists network ports as none, with a choice of OCP or stand-up card. Only one OCP slot is available. The 1Gb dedicated iLO management port and the front iLO service port are separate from production networking.

Can I mix new and refurbished parts in the DL345 Gen10 Plus?
Yes. Genuine HPE parts perform identically whether new or refurbished, and our refurbished stock is tested before shipping - a common way to add memory, drives, or a second power supply at lower cost.

✅ Looking for a specific DL345 Gen10 Plus part? Browse our full selection below.

Why Global One?

• Trusted by thousands. Over 36,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
• HPE is our specialty! We only sell genuine HP Enterprise parts.
• EASY ordering process. Purchase online now with credit card or PayPal!
• FAST shipping. Global One Technology ships orders received by 4pm ET the same day and offers NEXT DAY delivery to US customers.