HPE ProLiant DL345 Gen11 Parts

HPE ProLiant DL345 Gen11 Parts

HPE ProLiant DL345 Gen11 Parts

The HPE ProLiant DL345 Gen11 is the 2U single-processor EPYC platform — one 4th or 5th Generation AMD EPYC processor, 12 channels of DDR5, and front ends running to 34 SFF, 20 LFF, or 36 EDSFF E3.S bays. Every part below is genuine HPE, available new and refurbished, and tested for compatibility before it ships. Live pricing for each part number appears in the tables further down this page.

DL345 Gen11 Platform at a Glance

  • Processor: one 4th or 5th Generation AMD EPYC processor in an LGA 6096-pin SP5 socket — up to 160 cores, 400W, and 1150MB of L3 cache
  • Memory: 12 DIMM slots, 12 channels, 1 DIMM per channel — DDR5-4800 with 4th Gen EPYC and DDR5-6400 with 5th Gen, to a maximum of 3.0TB
  • Storage: 8SFF, 24SFF, 8LFF, EDSFF, and GPU CTO chassis — up to 34 SFF, 20 LFF, or 36 EDSFF E3.S 1T drives
  • Expansion: PCIe 5.0 x16 throughout — two slots as standard, four with the 4PCIe enablement kit, six with the 6PCIe kit; 128 PCIe 5.0 lanes per processor
  • Networking: no embedded networking — two OCP 3.0 slots at PCIe 5.0 x8 plus stand-up PCIe adapters
  • Power: one or two HPE Flex Slot hot-plug supplies — 500W, 800W, 1000W, 1600W, and 1800W-2200W options
  • Management: HPE iLO 6 with Intelligent Provisioning, silicon root of trust, and embedded TPM 2.0

Check the EPYC generation before you order anything. The DL345 Gen11 is a 2U 1P server — one 4th or 5th Generation AMD EPYC processor feeds all 12 DIMM slots and 128 PCIe 5.0 lanes, and it sets the DDR5 grade at 4800 MT/s or 6400 MT/s.

Full platform detail is in the official HPE DL345 Gen11 QuickSpecs.

Shop DL345 Gen11 Parts by Category

Comparing generations? See DL345 Gen10 Plus parts or our guide to how Gen10 and Gen11 compare. Sibling AMD Gen11 platforms: DL385 Gen11, DL365 Gen11, and DL325 Gen11. Or browse all HPE parts by server model.

DL345 Gen11 Parts FAQ

Is the HPE ProLiant DL345 Gen11 a single-processor server?
Yes. The QuickSpecs describe it as a 2U 1P solution and instruct you to select one 4th or 5th Generation AMD EPYC processor. That one CPU provides all 12 memory channels and 128 PCIe 5.0 lanes.

How much memory does the DL345 Gen11 support?
Up to 3.0TB. The server has 12 DIMM slots on 12 channels at 1 DIMM per channel, and the QuickSpecs give the maximum as 12 x 256GB RDIMM - at 4800 MT/s with 4th Gen EPYC processors and 6400 MT/s with 5th Gen.

How many drives fit in a DL345 Gen11?
Up to 34 SFF drives, 20 LFF drives, or 36 EDSFF E3.S 1T drives, depending on the chassis. The CTO chassis choices are 8SFF, 24SFF, 8LFF, EDSFF, and GPU.

Does the DL345 Gen11 have built-in network ports?
No. The QuickSpecs list network ports as none and state 'No embedded networking' - every build selects either an OCP 3.0 card or a stand-up PCIe adapter for primary networking. The dedicated 1Gb iLO management port is separate.

How many PCIe slots does the DL345 Gen11 have?
Two PCIe 5.0 x16 slots by default, one on each riser. The 4PCIe enablement kit takes it to four slots and the 6PCIe enablement kit to six. The GPU CTO server adds front slots for up to four single-width or two double-width GPUs.

Can I mix new and refurbished parts in the DL345 Gen11?
Yes. Genuine HPE parts perform identically whether new or refurbished, and refurbished stock is tested before shipping - a common way to add memory, drives, or a second power supply at lower cost.

Looking for a specific DL345 Gen11 part? Browse our full selection below.

Parts Finder Narrow to your model…
Compare Selected