HPE ProLiant DL380 Gen10 Plus Parts

2U rack server3rd Gen Intel Xeon Scalable

The HPE ProLiant DL380 Gen10 Plus is a 2U rack server for one or two 3rd Gen Intel Xeon Scalable processors, and that processor generation decides its memory: DDR4-3200 kits only, not the DDR4-2666 or DDR4-2933 kits of the DL380 Gen10. This page lists the 366 parts HPE's QuickSpecs have listed for it across editions, by part type.

  • 366 HPE-listed parts
  • 32 DIMM slots, up to 8TB
  • Up to 38 SFF or 20 LFF drives
  • Up to 8 PCIe 4.0 slots on 3 risers
  • Flex Slot power, 800W to 1800W-2200W

Specifications: HPE QuickSpecs a50002553enw, version 42 (July 28, 2025), which HPE has retired. Memory and drive figures match the DL380 Gen10 Plus Memory and Drives pages.

Shop DL380 Gen10 Plus parts by type

More DL380 Gen10 Plus parts: chassis, expansion and enablement

Most ordered from this list

The parts on this page our customers order most, for any server.

  1. DrivesP28352-B212.4TB SAS 12G Mission Critical 10K SFF BC 512e Multi Vendor HDD
  2. DrivesP40500-B213.84TB SATA 6G Read Intensive SFF BC Multi Vendor SSD
  3. Drives861686-B211TB SATA 6G Business Critical 7.2K LFF LP Multi Vendor HDD
  4. DrivesP28586-B211.2TB SAS 12G Mission Critical 10K SFF BC Multi Vendor HDD
  5. DrivesP40498-B21960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD
  6. DrivesP47808-B21960GB SATA 6G Read Intensive LFF LPC Multi Vendor SSD
  7. Drives881787-B2112TB SATA 6G Business Critical 7.2K LFF LP Helium 512e Multi Vendor HDD
  8. Power supplies865434-B21800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
  9. Drives861683-B214TB SATA 6G Business Critical 7.2K LFF LP Multi Vendor HDD
  10. DrivesP40505-B213.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD

DL380 Gen10 Plus at a glance

Processors

One or two 3rd Gen Intel Xeon Scalable processors of the same model (model numbers x3xx). HPE does not support a field upgrade from 1st or 2nd Gen processors to 3rd Gen. U models, such as the Gold 6312U, run in single-socket configurations only.

Processors ship without heat sinks; those of 150W or more need the High Performance Heat Sink Kit. DL380 Gen10 Plus Processors

Memory

32 DIMM slots, 16 per processor on 8 channels. DDR4-3200 kits only: RDIMMs from 8GB to 64GB, LRDIMMs of 128GB and 256GB. Up to 8TB with 256GB LRDIMMs in every slot, or 2TB with 64GB RDIMMs; the two types do not mix.

The processor sets the speed: up to 3200 MT/s with Platinum and Gold 63xx models, 2933 MT/s with most Gold 53xx, 2667 MT/s with Silver 43xx. DL380 Gen10 Plus Memory

Drives

Up to 38 SFF drives (24 front, 8 mid tray, 6 rear) or 20 LFF drives (12 front, 4 mid tray, 4 rear).

SFF drives are BC (Basic Carrier) in SAS, SATA or NVMe (U.3 and U.2); the Smart Carrier (SC) drives HPE lists for the DL380 Gen10 are not on this list. LFF hard drives are LFF LP, and HPE lists the LFF SSDs as LFF LPC.

HPE's maximum storage table counts 34 NVMe drives. HPE also lists the NS204i-p NVMe OS boot device, which needs UEFI boot mode. DL380 Gen10 Plus Drives

Storage controllers

Embedded SR100i software RAID: 12 accessible SATA ports, UEFI mode only, off until enabled, and up to 2 NVMe drives connected directly to the system board.

Smart Array E208i, P408i and P816i-a; tri-mode MR216i, MR416i, SR416i-a and SR932i-p controllers, which let U.3 drive cages mix SAS, SATA and NVMe drives. Performance RAID controllers need a Smart Storage Battery or Smart Hybrid Capacitor. DL380 Gen10 Plus Storage Controllers

Networking

No embedded networking: an OCP 3.0 or stand-up network adapter is required, and HPE lists adapters up to 200GbE. A dedicated 1Gb iLO port at the rear. DL380 Gen10 Plus Networking Adapters

Expansion

Up to 8 PCIe 4.0 slots: 1-3 on the primary riser, 4-6 on the secondary and 7-8 on the tertiary riser; the secondary and tertiary risers need processor 2. Riser cards

Power

Flex Slot hot-plug power supplies from 800W to 1800W-2200W, including -48VDC and high-voltage AC/DC models. Do not mix power supplies in one server. DL380 Gen10 Plus Power Supplies

Management

HPE iLO 5. Management hardware

Specifications from HPE QuickSpecs a50002553enw, version 42 (July 28, 2025). Memory figures match the DL380 Gen10 Plus Memory page.

Before you order memory or processors, check that the server is a Gen10 Plus. A DL380 Gen10 Plus has 3rd Gen Xeon Scalable processors, model numbers x3xx (Gold 6338, Silver 4314), and takes DDR4-3200 kits only. A DL380 Gen10 has x1xx or x2xx processors (Gold 6130, Gold 6230) and takes DDR4-2666 or DDR4-2933 kits. Those processors and kits are not on this list, and HPE does not support a field upgrade from x1xx or x2xx processors to 3rd Gen. Find the model in iLO under System Information › Processors.

Gen10, Gen10 Plus or Gen11? How to tell

The processor model number tells the three DL380 generations apart, and it decides the memory you can buy.

What to checkDL380 Gen10DL380 Gen10 Plus This pageDL380 Gen11
Processor model numbersx1xx or x2xx: Gold 6130, Gold 6230, Silver 4210x3xx: Gold 6338, Silver 4314x4xx or x5xx: Gold 6430, Gold 6530
MemoryDDR4-2666 or DDR4-2933, 24 slotsDDR4-3200, 32 slotsDDR5-4800 or DDR5-5600, 32 slots
Memory kits look likeP00922-B21, P00924-B21P06029-B21, P40007-B21P43322-B21, P64705-B21
Parts pageDL380 Gen10 partsYou are hereDL380 Gen11 parts

From the HPE QuickSpecs of each server: HPE ProLiant DL380 Gen10 a00008180enw version 77; HPE ProLiant DL380 Gen10 Plus a50002553enw version 42; HPE ProLiant DL380 Gen11 a50004307enw version 48.

All 366 DL380 Gen10 Plus parts

Grouped by part type; within each group the parts are in the order of HPE's QuickSpecs. Open a group, or type a part number or a few words to filter the whole list.

DL380 Gen10 Plus parts questions

How much memory does the DL380 Gen10 Plus support?

Up to 8TB with two processors: 32 slots with 256GB DDR4-3200 LRDIMMs in every one. With RDIMMs the maximum is 2TB (64GB in every slot). A single processor can use only its 16 slots. The DL380 Gen10 Plus takes DDR4-3200 kits only, and the processor sets the speed they run at.

Which drives fit the DL380 Gen10 Plus?

SFF BC drives in SAS, SATA or NVMe (U.3 and U.2), LFF LP hard drives in SAS or SATA, and LFF LPC SSDs. Which interfaces work depends on the drive cage and on whether it is connected to a Smart Array controller, a tri-mode controller or the embedded SR100i.

Is my server a DL380 Gen10, Gen10 Plus or Gen11?

Read the processor model in iLO under System Information › Processors. On a Xeon Scalable processor, named Platinum, Gold, Silver or Bronze, the second digit of the model number is the generation. A 3 (x3xx, such as Gold 6338 or Silver 4314) means 3rd Gen Xeon Scalable and a DL380 Gen10 Plus, with DDR4-3200 memory in 32 slots. A 1 or 2 (Gold 6130, Gold 6230) means a DL380 Gen10, with DDR4-2666 or DDR4-2933 memory in 24 slots; a 4 or 5 (Gold 6430, Gold 6530) means a DL380 Gen11, with DDR5 memory. Memory kits and processors differ between them, so buy those from the page for your generation.

Do DL380 Gen10 Plus processors come with a heat sink?

No. HPE ships the processors without heat sinks, so order them separately. Processors of 150W or more need the High Performance Heat Sink Kit (P27095-B21); below 150W, HPE's pre-configured models use the standard heat sink (Standard Heat Sink Kit, P37034-B21). HPE generally requires the Maximum Performance Fan Kit (P14608-B21) with processors above 205W, rear drives or High Performance NVMe drives.

Are refurbished parts on this list too?

Yes. A refurbished part carries the same HPE part number as a new one, so it is listed here under that number, and each listing shows its condition. Every part ships tested or factory sealed.

What warranty comes with DL380 Gen10 Plus parts?

A replacement warranty of 1 to 5 years, depending on the part: memory is covered for 5 years, and many other parts for 1 or 3 years.

Other DL380 generations

Ships same dayMost orders ship the same business day
1 to 5 year warrantyTested or factory sealed
Purchase orders acceptedCard, P-card, ACH, wire or PayPal too
Drives158 parts

All drives on the DL380 Gen10 Plus Drives page

Hard Disk Drives - 2.5in SFF SAS

Mission Critical - 12G SAS - SFF HDD
Enterprise - 12G SAS - SFF HDD
Midline - 12G SAS - SFF HDD

Hard Disk Drives - 2.5in SFF SATA

Midline - 6G SATA - SFF HDD

Hard Disk Drives - 3.5in LFF SAS

Midline - 12G SAS - LFF HDD

Hard Disk Drives - 3.5in LFF SATA

Midline - 6G SATA - LFF HDD

Solid State Drives - 2.5in SFF SAS

Read Intensive - 24G SAS - SFF - SSD
Read Intensive - 12G SAS - SFF - SSD
Write Intensive - 24G SAS - SFF - SSD
Mixed Use - 24G SAS - SFF - SSD
Mixed Use - 12G SAS - SFF - SSD

Solid State Drives - 2.5in SFF SATA

Very Read Optimized - 6G SATA - SFF - SSD
  • P58228-B21 HPE 7.68TB SATA VRO SFF BC 5400 SSD
Read Intensive - 6G SATA - SFF - SSD
Mixed Use - 6G SATA - SFF - SSD

Solid State Drives - 3.5in LFF SAS

Read Intensive - 24G SAS - LFF - SSD
Mixed Use - 12G SAS - LFF -SSD

Solid State Drives - 3.5in LFF SATA

Very Read Optimized - 6G SATA - LFF - SSD
  • P58232-B21 HPE 7.68TB SATA VRO LFF LPC 5400 SSD
Read Intensive - 6G SATA - LFF - SSD

Solid State Drives - 2.5in SFF NVMe

Read Intensive - NVMe - SFF - SSD
Write Intensive - NVMe - SFF - SSD
  • P51465-B21 HPE 400GB NVMe Gen4 High Performance Low Latency Write Intensive SFF BC U.2 P5800X SSD
  • P51467-B21 HPE 800GB NVMe Gen4 High Performance Low Latency Write Intensive SFF BC U.2 P5800X SSD
Mixed Use - NVMe - SFF - SSD
Mixed Use - NVMe - SFF - FIPS SSD
Read Intensive - NVMe - SFF - FIPS SSD

Solid State Drives - NVMe Add-in Card

HPE NVMe x8 Lanes Mixed Use HHHL

Hard Drive Blank Kits

Memory12 parts
Network adapters48 parts

All network adapters on the DL380 Gen10 Plus Networking Adapters page

HPE Networking

1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
HPE note

Unless otherwise noted, one of the below 10Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen10 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.

25 Gigabit Ethernet adapters
HPE note

Unless otherwise noted, one of the below 10/25Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen10 Plus NC CTO chassis does not come with embedded networking, hence the requirement to configure with either an OCP3 or select PCIe networking adapter.

100 Gigabit Ethernet Adapters
HPE notes (4)
  • 1. These cards are not supported with 12LFF CTO config. 2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit 4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
  • A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
  • Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information.
  • Not allowed in slots 3 or 6
200 Gigabit Ethernet Adapters
200 Gigabit Slingshot Adapters
  • R4K46A HPE Slingshot SA210S Ethernet 200Gb 1-port PCIe NIC
    HPE note

    This option requires the selection of Max Performance Fan Kit (P14608-B21). This option cannot be selected with 12LFF Model X. Max = 3 Can only be selected or configured for a Cray Shasta Solutions or Rogue Solutions. Not configurable for Non-Cray or Non-Rogue Solutions.

OCP 3.0 Adapters
OCP 3.0 Enablement

HPE InfiniBand

  • P45642-B22 HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter
    HPE note

    1. This card is not supported with mid-tray drive cages for both LFF/SFF chassis. 2. Required to use Max Performance Fan Kit 3. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6. 4. Could observe sub-optimal performance if installed in x8 slot.

  • P45642-B21 HPE IB NDR200 1p OSFP MCX75310AAS Adptr
  • P31323-B21 HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 OCP3 MCX653435A-HDAI Adapter
  • P31348-B21 HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 OCP3 MCX653436A-HDAI Adapter
    HPE note

    1. These cards are not supported with 12LFF/24SFF CTO config. 2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit 4. Not supported with DIMMs with more than 128GB 5. Not supported with CPUs more than 240W 6. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6. 7. Could observe sub-optimal performance if installed in x8 slot.

  • P23664-B21 HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 MCX653105A-HDAT Adapter
    HPE note

    1. These cards are note supported with 12LFF CTO config. 2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit 4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6. 5. Could observe sub-optimal performance if installed in x8 slot.

  • P31324-B21 HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT Adapter
    HPE note

    1. These cards are not supported with 12LFF CTO config. 2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 3. Required to use Max Performance Fan Kit 4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6. 5. Could observe sub-optimal performance if installed in x8 slot.

  • 829335-B21 HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel Omni-Path Architecture Adapter
    HPE note

    Not allowed in slots 3 or 6

  • P23665-B21 HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter
    HPE note

    Could observe sub-optimal performance if installed in x8 slot. Not allowed in slots 3 or 6

  • P23666-B21 HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT Adapter
    HPE note

    5. These cards are note supported with 12LFF CTO config. 6. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis. 7. Required to use Max Performance Fan Kit 8. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6. 9. Could observe sub-optimal performance if installed in x8 slot.

HPE Smart IO

Pensando Distributed Services Card (DSC)
  • P26966-B21 Pensando Distributed Services Platform DSC-25 Enterprise 10/25Gb 2-port SFP28 Card
    HPE note

    Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configure-to- Order (CTO) chassis. To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected. DSC card must be installed in slot 1 when configured with Pensando for HPE iLO Adaptive LOM module (P26969-B21) Each card instance requires one RTU license of Silver or Platinum software. In case of more than one adapter, RTU licenses do not need to be of the same part number. One 3yr/4yr/5yr Silver or 3yr/4yr/5yr Platinum software license must be purchased for every DSC-25 card/adapter in a server. 1yr Silver, 1yr Platinum software licenses are reserved for renewals only.

Storage controllers13 parts

All storage controllers on the DL380 Gen10 Plus Storage Controllers page

HPE Flexible Smart Array Performance RAID Controllers
HPE notes (2)
  • All performance RAID controllers are supported by the HPE Smart Storage Hybrid Capacitor (P02377-B21) or HPE Smart Storage Battery (P01366-B21), which supports multiple devices and are sold separately.
  • Flexible Smart Array controllers do not consume a PCIe slot.
HPE Flexible Smart Array Essential Controllers
Performance RAID Controllers
HPE note

All performance RAID controllers are supported by the HPE Smart Storage Hybrid Capacitor (P02377- B21) or HPE Smart Storage Battery (P01366-B21), which support multiple devices and are sold separately.

HPE Tri-Mode Controllers
Essential RAID Controllers
Drive cages and backplanes22 parts
  • P55696-B21 HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA Primary Secondary Drive Cage Kit
    HPE note

    2SFF Rear Cage (Primary/ Secondary Riser position) Drive Cage Capacity – MAX=2 SFF SAS/SATA drives Includes (Slot 3/6) 1x16 PCIe FH/HL Slot (Electrically x16). Max = 2 Requires selection of Max Performance Fan Kit (P14608-B21) Requires selection of tri-mode controller If used in rear position, then drives must be under 10W.

  • P55698-B21 HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA BC Drive Cage Kit
    HPE note

    2SFF Drive Cage (Front/ Rear) Drive Cage Capacity – MAX=2 SFF SAS/SATA drives Max = 2 for the 8SFF Model-X Max = 1 for 8LFF, 12LFF, and 24SFF Model-X On 8SFF Model-X, if quantity = 2 then the Universal Media Bay (P14609-B21) must also be selected. On 8SFF Model-x, if Universal Media Bay is not selected this will be installed in the rear and Maximum Performance Fan Kit (P14608-B21) is required. Requires selection of tri-mode controller. When used in rear position then drives must be under 10W

  • P55699-B21 HPE ProLiant DL3xx Gen10 Plus 2U 2SFF SAS/SATA BC Drive Cage Kit
    HPE note

    2SFF side-by-side Front Cage Can only be supported on 8LFF Model-X Max = 1 Requires selection of Maximum Performance Fan Kit (P14608-B21) Requires selection of tri-mode controller,

  • P55700-B21 HPE ProLiant DL38x Gen10 Plus 4LFF SAS/SATA LP Drive Cage Kit
    HPE note

    4LFF Mid Tray Drive Cage Capacity – MAX=4 LFF SAS/SATA drives Can only be selected with 8LFF or 12LFF Model-X Max = 1 Requires selection of Maximum Performance Fan Kit (P14608-B21) No full length adapters can be supported. Requires selection of tri-mode controller. Cannot be selected with processors above 165W

  • P55516-B21 HPE ProLiant DL38x Gen10 Plus 8SFF SAS/SATA to Tri-Mode Controller Backplane Kit
    HPE note

    8SFF Front Drive Cage Drive Cage Capacity – MAX=8 SFF SAS/SATA drives Can only be selected with 8SFF Model-X Max = 1 Requires selection of tri-mode controller.

  • P55518-B21 HPE ProLiant DL38x Gen10 Plus 2LFF UBM to Tri-Mode LP Primary Riser Backplane Kit
    HPE note

    2LFF Rear Cage (Primary Riser Position) Drive Cage Capacity – MAX=2 LFF SAS/SATA drives Can only be selected with 8LFF or 12LFF Model-X Max = 1 Requires selection of tri-mode controller.

  • P55519-B21 HPE ProLiant DL38x Gen10 Plus 2LFF UBM to Tri-Mode LP Tertiary Riser Backplane Kit
    HPE note

    2LFF Rear Cage (Tertiary Riser Position) Drive Cage Capacity – MAX=2 LFF SAS/SATA drives. Includes (Slot 7) 1x16 PCIe FH/FL Slot (Electrically x16) Can only be selected with 8LFF or 12LFF Model-X Max = 1 Secondary riser cannot be selected if this option is selected. Requires selection of second processor. Requires selection of tri-mode controller.

  • P26922-B21 HPE ProLiant DL38X Gen10 Plus 2SFF x4 Tri-Mode 24G U.3 BC Front/Tertiary Drive Cage Kit
    HPE note

    Mixing of Drives (SAS/ SATA/ NVMe) is allowed on U.3 drive cage if selected along with Tri Mode Controllers. Can be installed into the Tertiary Riser location along with HPE DL38X Gen10 Plus AROC to NVMe Adapter Kit (P14602-B21)

  • P26924-B21 HPE ProLiant DL300 Gen10 Plus 2U 2SFF x4 Tri-Mode 24G U.3 BC Side-by-Side Drive Cage Kit
    HPE note

    Can be selected only with 8LFF Model X. This option requires the selection of High Performance Fan Kit (P14608-B21). HPE DL380 Gen10 Plus 2SFF U.3 SbS Kit (P26924-B21) and HPE DL380 Gen10 Plus 2FF SbS HDD Kit (P26925-B21) cannot be selected together. This option can be selected only if any one of the condition is met o Tri Mode Controller must be selected (Refer Controller category for details) o AROC to NVMe (P14602-B21) must be selected.

  • P26930-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF SAS/SATA 12G BC Front Bay 1/2 Drive Cage Kit
  • P26931-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 Tri-Mode 24G U.3 BC Front Drive Cage Kit
  • P26932-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 NVMe 16G U.2 BC Front Drive Cage Kit
    HPE note

    Can be selected only with 8SFF Model X. If Max Qty=3 of the 8SFF U.3Prem Kit (P26931-B21) OR 8SFF U.2Prem Kit (P26932-B21) OR 8SFF U.3 Basic Kit (P27194-B21) is selected, then o DL38x Gen10 Plus Box3 Removal Special Instr (873763-B21) must be selected o Universal Media Bay (P14609-B21) CAN NOT be selected If Max Qty=2 of the 8SFF U.3Prem Kit (P26931-B21) OR 8SFF U.2Prem Kit (P26932-B21) OR 8SFF U.3 Basic Kit (P27194-B21) ordered, then the Universal Media Bay (P14609-B21) can be selected only if DL38x Gen10 Plus Box3 Removal Special Instr (873763-B21) is selected. Does not support HPE DL300 G10+ 2U x1/x2 Tri-Mode Cable Kit (P36203-B21) with tri-mode storage controller.

  • P27194-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF x1 Tri-Mode 24G U.3 BC Front Drive Cage Kit
    HPE note

    Can be selected only with 8SFF Model X. If Max Qty=3 of the 8SFF U.3Prem Kit (P26931-B21) OR 8SFF U.2Prem Kit (P26932-B21) OR 8SFF U.3 Basic Kit (P27194-B21) is selected, then o DL38x Gen10 Plus Box3 Removal Special Instr (873763-B21) must be selected o Universal Media Bay (P14609-B21) CAN NOT be selected If Max Qty=2 of the 8SFF U.3Prem Kit (P26931-B21) OR 8SFF U.2Prem Kit (P26932-B21) OR 8SFF U.3 Basic Kit (P27194-B21) ordered, then the Universal Media Bay (P14609-B21) can be selected only if DL38x Gen10 Plus Box3 Removal Special Instr (873763-B21) is selected. Requires selection of Tri Mode Controller (Refer Controller category). Mixing of Drives (SAS/ SATA/ NVMe) is allowed on U.3 drive cage if selected along with Tri Mode Controllers.

  • P14579-B21 HPE ProLiant DL38X Gen10 Plus 2LFF Primary Riser Cage Kit
    HPE note

    Can be selected only with 8LFF Model X and 12LFF Model X. This option is housed into a Riser assembly and will be installed in Primary Riser location. Since this option is part of the Riser assembly, it must be classified as a Primary Riser and Max Qty=1 PRIMARY Risers is allowed per server.

  • P14580-B21 HPE ProLiant DL38X Gen10 Plus 2LFF Tertiary Riser Cage Kit
    HPE note

    Can be selected only with 8LFF Model X and 12LFF Model X. Secondary Riser CANNOT be selected if this option is selected. HPE DL38X Gen10 Plus 2LFF LP Sec Riser Kit (P25903-B21) and HPE DL38X Gen10 Plus 2LFF Tertiary FIO Kit (P14580-B21) cannot be selected together. This option is housed into a Riser assembly and will be installed only in Tertiary Riser location Since this option is part of the Riser assembly, it must be classified as a Tertiary Riser and Max Qty=1 TERTIARY Risers is allowed per server. Requires selection of Second Processor.

  • P25903-B21 HPE DL38X Gen10 Plus 2LFF Low Profile Secondary Riser Kit
    HPE note

    Can be selected only with 8LFF Model X and 12LFF Model X. HPE DL38X Gen10 Plus 2LFF LP Sec Riser Kit (P25903-B21) and HPE DL38X Gen10 Plus 2LFF Tertiary FIO Kit (P14580-B21) cannot be selected together. This option is housed into a Riser assembly and will be installed only in Secondary Riser location Since this option is part of the Riser assembly, it must be classified as a Secondary Riser and Max Qty=1 secondary Risers is allowed per server. Requires selection of Second Processor.

  • P26919-B21 HPE ProLiant DL38X Gen10 Plus 4LFF SAS/SATA 12G LP Midplane Drive Cage Kit
    HPE note

    Can be selected only with 8LFF Model X and 12LFF Model X. This option requires the selection of High Performance Fan Kit (P14608-B21). If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as these models already come standard with the High Performance Fans. If this option is selected, NO "Full Length" (FL) PCIe cards can be supported. Max of 1 Mid tray allowed per server for selection. o 4LFF Midtray Kit (P26919-B21) o 8SFF U.3 x1 Mid Tray (P27193-B21) o 8SFF U.3 x4 Mid Tray (P39769-B21) Mid Tray cannot be selected with Processors above 165W.

  • P26920-B21 HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA 12G BC x16 Slot 3 Primary/Secondary Riser Kit
    HPE note

    This option requires the selection of High Performance Fan Kit (P14608-B21). If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as these models already come standard with the High Performance Fans. If Qty 1 is selected, then it can be installed into the Primary Riser location or the Secondary Riser location. If other Primary Riser is selected along with it, then it will be considered as Secondary Riser and vice-versa (Max of 1 Primary Riser per Server and Max of 1 Secondary Riser per Server) If Qty 2 are selected then it will be installed into both Primary Riser and Secondary Riser location. No other Primary Riser and Secondary Riser are allowed. If this Qty1 of this option is selected along with other Primary Riser (i.e. if it is selected as Secondary Riser) or Qty2 of this option is selected then: o Tertiary Riser cannot be selected (Except Tertiary 2P NVMe Riser (P27093-B21)) o Second Processor must be selected

  • P26923-B21 HPE ProLiant DL380 Gen10 Plus 2SFF SAS/SATA 12G BC Front/Tertiary Stackable Drive Cage Kit
  • P26925-B21 HPE ProLiant DL300 Gen10 Plus 2U 2SFF SAS/SATA 12G BC Side-by-Side Drive Cage Kit
    HPE note

    Can be selected only with 8LFF Model X. This option requires the selection of High Performance Fan Kit (P14608-B21). If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as these models already come standard with the High Performance Fans. HPE DL380 Gen10 Plus 2SFF U.3 SbS Kit (P26924-B21) and HPE DL380 Gen10 Plus 2FF SbS HDD Kit (P26925-B21) cannot be selected together.

  • P27193-B21 HPE ProLiant DL38X Gen10 Plus 8SFF x1 Tri-Mode 24G U.3 BC Midplane Drive Cage Kit
    HPE note

    This option requires the selection of High Performance Fan Kit (P14608-B21). If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as these models already come standard with the High Performance Fans. If this option is selected, NO "Full Length" (FL) PCIe cards can be supported. Max of 1 Mid tray allowed per server for selection. o 4LFF Midtray Kit (P26919-B21) o 8SFF U.3 x1 Mid Tray (P27193-B21) o 8SFF U.3 x4 Mid Tray (P39769-B21) 8SFF Mid tray supports drives below 12W only, consider this limitation for selection of Drives with this cage. Mixing of Drives (SAS/ SATA/ NVMe) is allowed on U.3 drive cage if selected along with Tri Mode Controllers. Mid Tray cannot be selected with Processors above 165W.

  • P39769-B21 HPE ProLiant DL300 Gen10 Plus 2U 8SFF x4 Tri-Mode 24G U.3 BC Midplane Drive Cage Kit
    HPE note

    This option requires the selection of High Performance Fan Kit (P14608-B21). If this option is being configured into a 12LFF Model-X or 24SFF Model-X, this rule does not apply as these models already come standard with the High Performance Fans. If this option is selected, NO "Full Length" (FL) PCIe cards can be supported. Can be selected only with 8SFF Model X and 24SFF Model X. Mixing of Drives (SAS/ SATA/ NVMe) is allowed on U.3 drive cage if selected along with Tri Mode Controllers. Mid Tray cannot be selected with Processors above 165W. Supports 8 SAS/SATA SFF drives in Box 1 or 2 to a max of 24 SFF SAS/SATA front.

Riser cards17 parts
HPE notes (3)
  • The Primary Riser shipping default in the chassis is a x8 FH, FL, x16 FH, FL and x8 FH, HL.
  • For a Secondary/Tertiary riser, the second processor is required.
  • x16 cards installed on x8 slots could observe sub-optimal performance.
Power supplies9 parts

All power supplies on the DL380 Gen10 Plus Power Supplies page

HPE Power Supplies

HPE notes (5)
  • Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA), the United Kingdom, or Switzerland must include more efficient AC power supplies: 94% for multi-output and 96% for single-output. HPE Flexible Slot power supplies are single-output, and part numbers 865438-B21, P03178-B21, and P44712-B21 are 96% efficient, thus meeting requirements.
  • HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in advance to satisfy requests with the current power supplies by the set deadline.
  • Select a minimum (1), maximum (2) power supplies.
  • 1600W Power supplies only support high line voltage (200VAC to 240VAC).
  • All power supplies in a server should match. Mixing Power Supplies is not supported.
Processors36 parts

All processors on the DL380 Gen10 Plus Processors page

HPE Processors

HPE notes (4)
  • Processors do not ship with heatsinks; these must be ordered separately.
  • Field upgrades from 1st generation processors (x1xx) or 2nd generation processors (x2xx) to 3rd generation processors (x3xx) not supported.
  • All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.
  • Processors with TDP equal to or greater than 150W require High Performance Heatsink (P27095-B21)
3rd Generation Intel Xeon-Platinum
3rd Generation Intel Xeon-Gold
HPE notes (3)
  • Processors do not ship with heatsinks; these must be ordered separately.
  • Field upgrades from 1st generation processors (x1xx) and 2nd generation processors (x2xx) to 3rd generation processors (x3xx) not supported.
  • All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.
3rd Generation Intel Xeon-Silver
HPE notes (5)
  • Processors do not ship with heatsinks; these must be ordered separately.
  • Field upgrades from 1st generation processors (x1xx) and 2nd generation processors (x2xx) to 3rd generation processors (x3xx) not supported.
  • All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.
  • 2667 MT/S maximum memory speed.
  • 8GB SGX Enclave unless otherwise noted.

Heat Sinks

Cable kits15 parts
  • P55467-B21 HPE ProLiant DL38x 8SFF SAS/SATA Tri-Mode Cable Kit
    HPE note

    Used to support 8SFF SAS/SATA UBM2 to tri-mode controller (AROC/PCIe) on Box 1,2,3. If Tmode Cable Kits (P55467-B21 and P55860-B21) are not selected, then default cage will occupy all Embedded SATA ports.

  • P55469-B21 HPE ProLiant DL38x Gen10 Plus 2SFF SAS/SATA Tri-Mode Cable Kit
    HPE note

    Used to support 2SFF front stackable drive cage UBM2 to tri-mode controllers (AROC/PCIe) on Box 1.

  • P58900-B21 HPE ProLiant DL38x LFF SAS/SATA Tri-Mode Cable Kit
    HPE note

    Qty 1 is used to support 8LFF SAS/SATA UBM2 to tri-mode controller (AROC/PCIe). Qty 1 + Qty1 P55860-B21 HPE ProLiant DL38x Gen10 Plus 4LFF SAS/SATA Tri-Mode Cable Kit is required to support 12LFF SAS/SATA UBM2 to tri-mode controller (AROC/PCIe).

  • P55860-B21 HPE ProLiant DL38x Gen10 Plus 4LFF SAS/SATA Tri-Mode Cable Kit
    HPE note

    Used to support 4LFF SAS/SATA UBM2 to tri-mode controllers (AROC/PCIe) on Box 1,7. If Tmode Cable Kits (P55467-B21 and P55860-B21) are not selected, then default cage will occupy all Embedded SATA ports

  • P55471-B21 HPE ProLiant DL38x Gen10 Plus 2SFF Rear Tri-Mode Cable Kit
    HPE note

    Used to support rear 2SFF SAS/SATA UBM2 to tri-mode controllers (AROC/PCIe).

  • P14602-B21 HPE DL38X Gen10 Plus AROC to NVMe Adapter Kit
    HPE note

    Used to support up to 16 NVMe drives with Modular Controller (AROC)

  • P22829-B21 HPE DL38X Gen10 Plus 8NVMe CPU1/2 Cable Kit
  • P36202-B21 HPE ProLiant DL300 Gen10 Plus 2U x4 Tri-Mode Cable Kit
  • P36203-B21 HPE ProLiant DL300 Gen10 Plus 2U x2 Tri-Mode Cable Kit
  • 786092-B21 HPE DL380 SFF Smart Array HBA H200/P400 Series SAS Cable Kit
  • P27094-B21 HPE ProLiant DL38x Gen10 Plus OCP to 2NVMe Adapter Kit
  • P39100-B21 HPE ProLiant DL300 Gen10 Plus GPU 2x 8-pin Cable Kit
  • P39102-B21 HPE ProLiant DL300 Gen10 Plus GPU 8-pin Keyed Cable Kit
  • P59212-B21 HPE ProLiant DL380 Gen10 Plus 8-pin/12-pin 2-way Power Cable Kit for NVIDIA H100 GPU
  • P61423-B21 HPE ProLiant DL380 Gen10 Plus 8-pin/12-pin 3-way Power Cable Kit for NVIDIA H100 GPU
Fibre Channel HBAs10 parts
Boot devices2 parts
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
  • P21868-B21 HPE 32GB microSD RAID 1 USB Boot Drive
Smart Storage battery2 parts
HPE note

Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers.

Optical drives4 parts

HPE Optical Drives

Media Bay Kits
  • P14609-B21 HPE DL38X Gen10 Plus Universal Media Bay Kit
    HPE note

    The HPE DL380 Gen10 Universal Media bay provides front Display Port and 2xUSB 2.0; plus, support for 2x SFF front drives or 2 NVME front drives (riser required) and ODD support (Not included); and can only be located in Box1 in either an 8 SFF or 8+8 SFF model. This is a SFF model option only.

Security4 parts
Rack options3 parts
HPE note

Easy Install rail kits contain telescoping rails which allow for in-rack serviceability.

  • P22018-B21 HPE DL38X Gen10 Plus 2U SFF Easy Install Rail Kit
    HPE note

    Does not include CMA (P22020-B21).

  • P22019-B21 HPE DL38X Gen10 Plus 2U LFF Easy Install Rail Kit
    HPE note

    Does not include CMA (P22020-B21).

  • P22020-B21 HPE DL38X Gen10 Plus 2U Cable Management Arm for Rail Kit
Management hardware2 parts
  • P14606-B21 HPE DL38X Gen10 Plus Rear Serial Cable Kit
  • P27096-B21 HPE ProLiant DL380 Gen10 Plus SFF Systems Insight Display Kit
Fan kits2 parts
GPUs7 parts

HPE Computation and Graphics Accelerators

  • S2D86C NVIDIA H100 NVL 94GB PCIe Accelerator for HPE
    HPE note

    Max = 1 Mixing of different GPU types is not allowed Requires the Max Performance Fan Kit (P14608-B21) to be selected. Requires the selection of the High Performance Heatsink (P27095-B21) NVIDIA H100 NVL SAS4 Drives cannot be selected together. NVIDIA H100 NVL and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together. If Qty1 of H100 HVL GPU is selected then HPE DL380 G10+ 2w Cbl Kit NVIDIA H100 (P59212-B21) must be selected. If H100 HVL GPU is selected then Drives (NVMe/SAS/SATA) above 11W cannot be selected. If H100 HVL GPU is selected then no rear drive cage can be selected.

  • R9S41C NVIDIA H100 80GB PCIe Accelerator for HPE
    HPE note

    Max = 2 Mixing of different GPU types is not allowed Requires the Max Performance Fan Kit (P14608-B21) to be selected. Requires the selection of the High Performance Heatsink (P27095-B21) NVIDIA H100 SAS4 Drives cannot be selected together. NVIDIA H100 and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together. If Qty1 of H100 GPU is selected then HPE DL380 G10+ 2w Cbl Kit NVIDIA H100 (P59212-B21) must be selected. If Qty2 of H100 GPU is selected then HPE DL380 G10+ 3w Cbl Kit NVIDIA H100 (P61423-B21) must be selected. If H100 GPU is selected then Drives (NVMe/SAS/SATA) above 11W cannot be selected. If H100 GPU is selected then no rear drive cage can be selected.

  • R8T26C NVIDIA A16 64GB PCIe Non-CEC Accelerator for HPE
    HPE note

    Max = 3 This GPU requires Pwr Cable Kit (P39102-B21) to also be selected. This option requires the Max Performance Fan Kit (P14608-B21) to be selected. This option requires the selection of the High Performance Heatsink (P27095-B21) Max of 8 NVMe Drives allowed for selection with this Graphics Option (All NVMe Drives selected must be below 11W). This Graphics option and SAS4 Drives cannot be selected together. If Qty 1 of this GPU is selected then Qty 1 of PRI/SEC wo Retainer Kit (P38771-B21) must be selected. Graphics Option and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together. This option cannot be selected with 12LFF Model X.

  • R9W59C NVIDIA A10 24GB PCIe Non-CEC Accelerator for HPE
    HPE note

    Max = 5 This option requires the Max Performance Fan Kit (P14608-B21) to be selected. This option requires the selection of the High Performance Heatsink (P27095-B21) This option cannot be selected with 24SFF Model X and 12LFF Model X. Max of 8 NVMe Drives allowed for selection with this Graphics Option (All NVMe Drives selected must be below 11W). This Graphics option and SAS4 Drives cannot be selected together. This option requires Power Cable Kit P39100-B21 Graphics Option and 40Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together. If Qty 1 or 2 of this GPU is selected and can be populated in primary riser then PRI/SEC wo Retainer Kit (P38771-B21) need not be selected.

  • R9H23C NVIDIA A2 16GB PCIe Non-CEC Accelerator for HPE
    HPE note

    Requires HPE DL38X Gen10+ PRI/SEC w/o Retainer Kit (P38771-B21) Requires HPE DL38X Gen10+ Ter w/o Retainer Kit (P38774-B21) if tertiary riser is selected This option requires the High Performance Fan Kit (P14608-B21) to be selected. This option requires the High Performance Heat sink (P27095-B21) System memory should be 2x GPU memory. Max of 8 NVMe drives allowed with this GPU, all NVMe drives must be under 11W This GPU and SAS4 drives cannot be selected together. This GPU and 40Gb or above Networking/InfiniBand/Smart IO adapters cannot be selected together. If NVMe Drive is selected with this Graphics Option then it can be populated in front cage only. Please consider this limitation while selecting Drives and Drive Cage. This Graphics option and SAS4 Drives cannot be selected together Graphics Option and 100Gb or above PCIe Networking/ Infiniband/ Smart IO (HW) Cards cannot be selected together. This option cannot be selected with 12LFF Model X.

  • S0K89C NVIDIA L4 24GB PCIe Accelerator for HPE
    HPE note

    If more than one GPU is selected, all the part numbers must match; Mixing of GPUs is not allowed. This option requires the Max Performance Fan Kit (P14608-B21) to be selected. If this option is being configured into a 24SFF Model-X, this rule does not apply as these models already come standard with the Max Performance Fans. If this graphics option is selected, the system memory capacity must be less than 128TB This option requires the selection of the High Performance Heatsink (P27095-B21) This GPU and NEBS Riser cannot be selected together. This Graphics option and SAS4 Drives cannot be selected together. Graphics Option and 40Gb or above PCIe Networking/ InfiniBand/ Smart IO (HW) Cards cannot be selected together. Maximum Qty = 8, dependent on riser selection. ο With max 8x L4 support, some GPUs will be installed on electrical x8 slot (slot 1, 3, 4, 6, 7 and 8). This option cannot be selected with 12LFF Model X.

  • S0K90C NVIDIA L40 48GB PCIe Accelerator for HPE
    HPE note

    If more than one GPU is selected, all the part numbers must match; Mixing of GPUs is not allowed. A Max Qty=1 Doublewide GPU per riser. Supported only on 8SFF Model X If Qty=3 of 8SFF Front drive cage and HPE 8SFF Front Remove SPEC Perf FIO is selected then this GPU cannot be selected If Qty=2 of 8SFF Front drive cage is selected along with Universal Media bay and 2SFF front drive cage then this GPU cannot be selected Max Qty=2 of this GPU is allowed per server. Requires the Max Performance Fan Kit (P14608-B21) to be selected. If this graphics option is selected, the system memory capacity must be less than 128TB This option requires the selection of the High Performance Heatsink (P27095-B21) This GPU and NEBS Riser cannot be selected together. This Graphics option and SAS4 Drives cannot be selected together. If Qty1 of L40 GPU is selected then HPE DL380 G10+ 2w Cbl Kit NVIDIA H100 (P59212-B21) must be selected. If Qty2 of L40 GPU is selected then HPE DL380 G10+ 3w Cbl Kit NVIDIA H100 (P61423-B21) must be selected. If L40 GPU is selected then Drives (NVMe/SAS/SATA) above 11W cannot be selected. If L40 GPU is selected then no rear drive cage can be selected.

Ships same dayMost orders ship the same business day
1 to 5 year warrantyReplacement coverage on every part
5,000+ five-star reviewsShopper Approved, BBB A+ rating
Ships to 120+ countriesBy UPS; duties are collected by the carrier

Building out several servers, or need a part not listed?

Send the part numbers and quantities for each server and we reply to every quote request within 24 hours. Live chat is the fastest way to reach us.