HPE ProLiant DL380 Gen10 Plus Parts
Find genuine HPE ProLiant DL380 Gen10 Plus parts to keep your server running at peak performance. Whether you need to replace a failed component or upgrade for enhanced computing power, we offer a complete selection of memory, drives, power supplies, storage controllers, networking, processors, and more.
Available HPE DL380 Gen10 Plus Parts:
- Memory: Upgrade with high-performance DDR4 RAM.
- Drives: Choose from enterprise SSDs, NVMe, SAS, and SATA HDDs.
- Storage Controllers: Ensure data protection with HPE Smart Array RAID controllers.
- Networking: High-speed Ethernet adapters and NICs for superior connectivity.
- Power Supplies: Redundant and energy-efficient power solutions.
- Processors: Intel Xeon CPUs for maximum compute power.
Built for enterprise workloads, virtualization, and cloud computing, these components ensure maximum efficiency and reliability in your DL380 Gen10 Plus server.
✅ Need a specific HPE DL380 Gen10 Plus part? Browse our selection or contact us for assistance.
Memory
Registered DIMMs (RDIMMs)
$207
$148.00
$167
$119.00
$221
$158.00
$489
$328.00
$179
$130.00
Load Reduced DIMMs (LRDIMMs)
Intel Optane Persistent Memory for HPE
$2,499
$2,499.00
$3,500
$2,558.00
$12,999
$12,999.00
HPE DDR-4 Blank Kit
$265
$189.00
Optical Media
Notes: HPE DL38X Gen10 Plus Universal Media Bay Kit (P14609-B21) is required for this option on a SFF model. No support in 12 LFF or 24 SFF models.
$103
$75.00
Notes: HPE DL38X Gen10 Plus Universal Media Bay Kit (P14609-B21) is required for this option on a SFF model. No support in 12 LFF or 24 SFF models.
$185
$159.00
Notes: This is only supported on USB 3.0 ports.
$385
$275.00
Media Bay Kits
Notes:
- The HPE DL380 Gen10 Universal Media bay provides front Display Port and 2xUSB 2.0; plus support for 2x SFF front drives or 2 NVME front drives (riser required) and ODD support (Not included); and can only be located in Box1 in either an 8 SFF or 8+8 SFF model.
- This is a SFF model option only.
$329
$235.00
Drives
HPE Hard Disk Drives
Mission Critical - 12G SAS - SFF HDD
Enterprise - 12G SAS - SFF HDD
Midline - 12G SAS - SFF HDD
Midline - 6G SATA - SFF HDD
Midline - 12G SAS - LFF HDD
$1,182
$889.00
$974
$785.00
$729
$536.00
Midline - 6G SATA - LFF HDD
$1,289
$975.00
$968
$795.00
$1,222
$819.00
$1,621
$1,158.00
Solid State Drives
For SSD selection guidance, please visit https://ssd.hpe.com/
Read Intensive - 24G SAS - SFF - SSD
Notes:
- For non-SED SAS4 drives: 24G SAS speeds require U.3 backplane/cage and choice of either SR932i-p, or SR416i-a Tri-Mode controller. Otherwise downclocks to 12G SAS.
- For SED SAS4 drives: SED capability requires choice of either MR416i-a, MR416i-p, MR216i-a or MR216i-p Tri-Mode controller and will run at 12G speeds.
Read Intensive - 12G SAS - SFF - SSD
$4,152
$2,966.00
$1,789
$1,418.00
Write Intensive - 24G SAS - SFF - SSD
Notes: For non-SED SAS4 drives: 24G SAS speeds require U.3 backplane/cage and choice of either SR932i-p, or SR416i-a Tri-Mode controller. Otherwise downclocks to 12G SAS.
Mixed Use - 24G SAS - SFF - SSD
Notes:
- For non-SED SAS4 drives: 24G SAS speeds require U.3 backplane/cage and choice of either SR932i-p, or SR416i-a Tri-Mode controller. Otherwise downclocks to 12G SAS.
- For SED SAS4 drives: SED capability requires choice of either MR416i-a, MR416i-p, MR216i-a or MR216i-p Tri-Mode controller and will run at 12G speeds.
Mixed Use - 12G SAS - SFF - SSD
$2,351
$1,679.00
Very Read Optimized - 6G SATA - SFF - SSD
Read Intensive - 6G SATA - SFF - SSD
$1,467
$1,048.00
$1,612
$1,127.00
$1,670
$1,193.00
$1,255
$948.00
$1,128
$806.00
Mixed Use - 6G SATA - SFF - SSD
$1,884
$1,346.00
$2,890
$2,209.00
$1,044
$865.00
$1,040
$743.00
$1,555
$1,249.00
$529
$392.00
$536
$383.00
Read Intensive - 12G SAS - LFF -SSD
$4,027
$3,051.00
Mixed Use - 12G SAS - LFF -SSD
Very Read Optimized - 6G SATA - LFF - SSD
Read Intensive - 6G SATA - LFF - SSD
Read Intensive - NVMe - SFF - SSD
¥10,790
¥6,331
$11,964
$8,546.00
¥8,631
¥5,064
$2,975
$2,249.00
$8,373
$5,981.00
¥5,392
¥3,164
$2,388
$1,706.00
$1,443
$1,031.00
Write Intensive - NVMe - SFF - SSD
Mixed Use - NVMe - SFF - SSD
$3,120
$2,375.00
$1,884
$1,346.00
$798
$549.00
Mixed Use - NVMe - SFF - FIPS SSD
Read Intensive - NVMe - SFF - FIPS SSD
$4,530
$3,236.00
$8,246
$6,247.00
Notes:
- With CM6 FIPS drives: If any of the NVMe SED drive is selected then either Direct Attach (NVMe Trigger or Slimline Riser or AROC to NVMe Adapter) or any MR series tri mode controller must be selected.
SED Drive max quantity selection is dependent on selection of tri mode controllers or Direct Attach method selected (Refer Controller/ Riser Cards/ NVMe Enablement Setting category for details of Drive cage and Qty of Drive supported).
- With CM6 FIPS drives – supported MR Series Tri Mode Controllers:
ο P26279-B21 - Broadcom MR416i-a Controller for HPE Gen10 Plus
ο P06367-B21 - Broadcom MR416i-p Controller for HPE Gen10 Plus
ο P26325-B21 - Broadcom MR216i-a Controller for HPE Gen10 Plus
ο P26324-B21 - Broadcom MR216i-p Controller for HPE Gen10 Plus
- With Direct Attach SED drives:
ο TPM2.0 is required for Local Key Management. Keys will be encrypted locally by TPM and stored locally.
ο iLO Adv is required for Remote Key Management. Key is stored in remote key manager.
- With MR controller SED drives:
ο TPM is not required for Local Key Management as Key is stored in controller
ο iLO Adv is required for Remote Key Management. Key is stored in remote key manager.
HPE NVMe x8 Lanes Mixed Use HHHL
Hard Drive Blank Kits
$223
$159.00
Hard Drive Kits
$12,799
$9,999.00
$702
$532.00
$710
$485.00
$437
$324.00
$680
$499.00
$665
$538.00
$329
$235.00
$668
$489.00
Networking
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
Notes: Unless otherwise noted, one of the below 10Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen10 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.
25 Gigabit Ethernet adapters
Notes: Unless otherwise noted, one of the below 10/25Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis.
The DL380 Gen10 Plus NC CTO chassis does not come with embedded networking, hence the requirement to configure with either an OCP3 or select PCIe networking adapter.
Notes: Could observe sub-optimal performance if installed in x8 slot.
$983
$739.00
Notes: Could observe sub-optimal performance if installed in x8 slot.
$395
$297.00
100 Gigabit Ethernet Adapters
$2,405
$1,850.00
Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
$684
$519.00
1. These cards are not supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
$1,047
$748.00
Notes:
- A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
- Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information.
- Not allowed in slots 3 or 6
Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
$807
$607.00
200 Gigabit Ethernet Adapters
1. These cards ar note supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
200 Gigabit Slingshot Adapters
Notes:
- This option requires the selection of Max Performance Fan Kit (P14608-B21).
- This option cannot be selected with 12LFF Model X.
- Max = 3
- Can only be selected or configured for a Cray Shasta Solutions or Rogue Solutions. Not configurable for Non-Cray or Non-Rogue Solutions.
OCP 3.0 Adapters
$745
$560.00
Notes: Adapter operates in either x8 or x16 mode. If x16 is desired, must select the HPE ProLiant DL300 Gen10 Plus OCP x16 Enablement Kit (P36661-B21)
$532
$400.00
Notes:
- Requires selection of HPE DL300 Gen10+ OCP x16 enablement Kit (P36661-B21).
- This option requires the selection of Max Performance Fan Kit (P14608-B21).
- This option cannot be selected with 12LFF Model X and 24SFF Model X.
- This option cannot be selected if 4LFF Midtray (P26919-B21/ P55700-B21) or 8SFF x1 Mid Tray (P27193-B21) or 8SFF U.3 x4 Mid Tray (P39769-B21) is selected.
$1,571
$1,181.00
OCP 3.0 Enablement
HPE InfiniBand
1. These cards are not supported with 12LFF/24SFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Not supported with DIMMs with more than 128GB
5. Not supported with CPUs more than 240W
6. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
7. Could observe sub-optimal performance if installed in x8 slot.
1. This card is not supported with 12LFF CTO config.
2. This card is not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
5. Could observe sub-optimal performance if installed in x8 slot.
1. These cards ar note supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
5. Could observe sub-optimal performance if installed in x8 slot.
$2,823
$2,139.00
Notes:
- Not allowed in slots 3 or 6
$273
$195.00
Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
$1,288
$875.00
I/O Expansion Options
Notes:
- The Primary Riser shipping default in the chassis is a x8 FH, FL, x16 FH, FL and x8 FH, HL.
- For a Secondary/Tertiary riser, the second processor is required.
- x16 cards installed on x8 slots could observe sub-optimal performance.
Notes:
- Requires selection of a 2nd processor
- x16 cards installed on x8 slots could observe sub-optimal performance.
$526
$378.00
Notes:
- Requires selection of a 2nd processor
- x16 cards installed on x8 slots could observe sub-optimal performance.
Notes: Requires selection of a 2nd processor
Notes: Requires selection of a 2nd processor
Notes: Requires selection of a 2nd processor
Notes: Requires selection of a 2nd processor
Notes: Requires selection of a 2nd processor
Notes: x16 cards installed on x8 slots could observe sub-optimal performance.
Notes: Requires selection of a 2nd processor
Notes:
- Requires selection of a 2nd processor
- x16 cards installed on x8 slots could observe sub-optimal performance.
Notes: Requires selection of a 2nd processor
Notes: Requires selection of HPE DL38X Gen10 Plus Tertiary NEBS-compliant Riser Kit (P14577-B21)
Notes: Requires selection of a 2nd processor
Notes:
- Requires selection of a 2nd processor
- x16 cards installed on x8 slots could observe sub-optimal performance.
$526
$378.00
Power Supplies
Notes: Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14 power inlet connector.
$321
$229.00
Notes: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
$459
$328.00
Notes: Flex Slot universal power supplies support power efficiency of up to 94% and support both 277VAC/380VDC power inputs.
$284
$197.00
Notes: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.
$253
$182.00
Notes: Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14 power inlet connector.
$371
$265.00
Notes: Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and include a C-14 power inlet connector that can support HPE Power Discovery Services (blue connector).
$390
$275.00
Notes: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
$585
$418.00
Cooling Options
Notes:
This kit is required for specific Ambient temperature environments.
High Performance fan kit consists of 6 fans, these will need to replace all the standard fans in the unit, and fill all 6 fan cages.
The 12 LFF and 24 SFF models (including field upgrades to 24 SFF) will already include 6 High Performance fan kits.
The High Performance fan kit is needed to support certain ASHRAE operating environments.
For elevated ambient temperature support please see: http://www.hpe.com/servers/ashrae.
$305
$218.00
Notes: High performance heat sink required for processors with a TDP equal or greater than 150W.
$194
$147.00
Storage Controllers
HPE Flexible Smart Array Performance RAID Controllers
Notes:
- All performance RAID controllers are supported by the HPE Smart Storage Hybrid Capacitor (P02377-B21) or HPE Smart Storage Battery (P01366-B21), which supports multiple devices and are sold separately.
- Flexible Smart Array controllers do not consume a PCIe slot.
HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular Controller
Notes:
- Includes SmartCache license.
- The P816i-a cable ships in the 12LFF chassis only (868705-B21).
$606
$415.00
HPE Flexible Smart Array Essential Controllers
Performance RAID Controllers
Notes: All performance RAID controllers are supported by the HPE Smart Storage Hybrid Capacitor (P02377-B21) or HPE Smart Storage Battery (P01366-B21), which support multiple devices and are sold separately.
HPE Tri-Mode Controllers
$727
$519.00
$749
$588.00
$780
$598.00
$407
$306.00
$1,285
$899.00
Essential RAID Controllers
Software RAID Controllers
Cable Options
Storage Options
Emulex Fibre Channel HBAs
$1,373
$1,040.00
$1,707
$1,219.00
QLogic Fibre Channel HBAs
¥1,929
¥1,132
¥2,214
¥1,299
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
3rd Generation Intel Xeon-Platinum
Notes:
Field upgrades from 1st Generation processors (x1xx) to 2nd Generation processors (x2xx) not supported.
All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.
$7,428
$5,627.00
$11,782
$8,926.00
$8,680
$6,576.00
Notes:8351N is single socket capable even though not being a 'U' processor. No dual socket support.
Notes:
-RequiresHigh Performance Heatsink (P27095-B21), Fans (P14608-B21) and DIMM blanks kit (P07818-B21).
-Does not support Intel Speed Select Technology Base Frequency (SST-BF).
$5,318
$4,029.00
Notes:
-32/28/24 cores would result in 2.3/2.4/2.6 GHz operating points 185W/185W/185W TDPs.
-RequiresHigh Performance Heatsink (P26479-B21).
-DIMM blanks kit (P07818-B21) recommended as enhance cooling.
-Does not support Intel Speed Select Technology Base Frequency (SST-BF).
3rd Generation Intel Xeon-Gold
Notes:
-Field upgrades from 1st generation processors (x1xx) and 2nd generation processors (x2xx) to 3rd generation processors (x3xx) not supported.
-All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.
$2,662
$2,017.00
$3,692
$2,797.00
$3,333
$2,525.00
$3,705
$2,807.00
$3,692
$2,797.00
$4,710
$3,568.00
$2,699
$2,045.00
Notes:Single socket capable, no dual socket support.
$5,691
$4,311.00
3rd Generation Intel Xeon-Silver
Notes:
-Field upgrades from 1st generation processors (x1xx) and 2nd generation processors (x2xx) to 3rd generation processors (x3xx) not supported.
-All SKUs below ship with processor only. Adequate fans and heatsinks must be selected.
$1,844
$1,397.00
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
