HPE ProLiant DL580 Gen10 Parts
Keep your HPE ProLiant DL580 Gen10 running at peak performance with our selection of compatible parts and upgrades. As a high-end 4-socket server designed for scalability and mission-critical workloads, the DL580 Gen10 supports a wide array of enterprise-grade components to meet demanding IT requirements.
Available DL580 Gen10 Parts:
- Memory: DDR4 ECC Registered RDIMM and LRDIMM
- Drives: SAS, SATA, and NVMe SSDs & HDDs
- Storage Controllers: HPE Smart Array RAID and HBA adapters
- Networking: 1GbE to 100GbE Ethernet adapters
- Power Supplies: High-wattage redundant PSUs
- Processors: Intel Xeon Scalable Gen1 & Gen2 (Platinum/Gold)
✅ Looking for a specific DL580 Gen10 part? Explore the subcategories below or contact us for expert support.
Unique Options
$326
$245.00

NOTE: Needs to be ordered with the HPE DL560 Gen10 Uni Media Bay Kit (872267-B21).
$1,116
$759.00

NOTE: This kit supports 6 PCIe slots and 2 NVMe ports which can support up to 4 NVMe drives.

NOTE: This kit supports 8 PCIe slots and 2 NVMe ports which can support up to 4 NVMe drives.

NOTE: This kit occupies the primary riser slot, supports 16 NVMe drives and must be ordered when supporting greater than 8 NVMe drives

NOTE: A GPU bracket (P00268-B21) kit is needed to install GPUs in slots 4 and 11 and must be be ordered along with the GPU cable kits 871828-B21 (for P6000) or 871829-B21 (for P40). Refer Expansion Slots sections for additional details on risers.
$177
$121.00

NOTE: 1 cable kits supports 3 GPUs and 2 cable kits must be ordered when supporting 4 GPUs.
NOTE: The HPE DL5x0 Gen10 CPU Mezz Kit (872222-B21) is needed for three or four processor configurations.
NOTE: The HPE DL580 Gen10 8SFF HDD Bay Kit (878366-B21) is shipped default with the server.
NOTE: A minimum of 1 primary riser must be ordered.
$207
$143.00
Memory
For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to:
For Gen10 memory speed table, please go to: (link)
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: (link)
Notes:
- Maximum memory capacity and speed per processor is dependent on processor model selection or limitation.
- DDR4-2933 Memory Kits are only supported with 2nd Generation Intel Xeon Scalable Series Processors and DDR4-2666 Memory Kits are only supported with 1st Generation Intel Xeon Scalable Series Processors.
HPE DDR4 Memory
Registered DIMMs (RDIMMs) for 2nd Generation Intel Xeon Scalable Series
$347
$248.00
$361
$258.00
$140
$100.00
$137
$98.00
$179
$128.00
Registered DIMMs (RDIMMs) for 1st Generation Intel Xeon Scalable Series
$105
$75.00
$111
$79.00
$125
$89.00
Load Reduced DIMMs (LRDIMMs) for 2nd Generation Intel Xeon Scalable Series
$863
$675.00
$974
$696.00
Load Reduced DIMMs (LRDIMMs) for 1st Generation Intel Xeon Scalable Series
HPE Persistent Memory (Intel Optane)
$6,369
$4,549.00
$1,789
$1,225.00
Notes:
NOTE: A maximum of 6 HPE Persistent Memory kits per processor and a maximum of 24 kits are supported
-- For additional information regarding HPE Persistent Memory Population Rules- and Guidelines for Gen10- visit:- (link)
HPE Persistent Memory (NVDIMM)
Notes:
- Can only be mixed with RDIMMs.
NOTE: A maximum of 6 NVDIMMs are supported per processor and the DL560 can support a maximum of 24 NVDIMMs.
-- For General Server Memory and NVDIMM Population Rules and Guidelines for Gen10 see details here:- (link)
Optical Media

NOTE: The optional Universal Media Bay Kits are required for this option. (HPE ProLiant DL560 Gen10 Universal Media Bay kit - 872267-B21).
$103
$75.00

NOTE: The optional Universal Media Bay Kits are required for this option. (HPE ProLiant DL560 Gen10 Universal Media Bay kit - 872267-B21)
$185
$159.00

NOTE: External.
$385
$275.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
Hard Disk Drives
Enterprise - 12G SAS - SFF HDD
$196
$147.00
$325
$249.00
$360
$250.00
$161
$115.00
$475
$358.00
$458
$344.00
$235
$168.00
$266
$178.00
Midline - 12G SAS - SFF HDD
Solid State Drives
Write Intensive SAS SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$581
$415.00
$727
$527.00
Write Intensive SATA SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$393
$269.00
$603
$475.00
Read Intensive SAS SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$773
$533.00
$876
$635.00
$1,856
$1,588.00
Read Intensive SATA SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$376
$254.00
$362
$266.00
$391
$266.00
$327
$237.00
$360
$245.00
$358
$245.00
$518
$375.00
$606
$433.00
$545
$371.00
$768
$533.00
$897
$623.00
$720
$518.00
$1,607
$1,148.00
Read Intensive NVMe SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$816
$563.00
$1,191
$805.00
$571
$414.00
$888
$604.00

NOTE: A NVME (878366-B21) or Premium (878364-B21) drive cage are required to support these drives in conjunction with the NVMe riser kit (878360-B21)
NOTE: NVMe drives are not supported by HPE Smart Array controllers.
$1,093
$786.00
Read Intensive M.2 2280 SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,775
$1,250.00
$968
$750.00
Mixed Use SAS SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
Mixed Use SATA SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
Mixed Use NVMe SFF SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$448
$320.00
$532
$380.00
$1,253
$889.00

NOTE: A NVME (878366-B21) or Premium (878364-B21) drive cage are required to support these drives in conjunction with the NVMe riser kit (878360-B21).
NOTE: NVMe drives are not supported by HPE Smart Array controllers.
$1,547
$1,129.00
Mixed Use M.2 2280 SSD

HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)

NOTE: M.2 drives go in the Primary Riser and use S100i SATA controller only
NOTE: M.2 supports Software RAID only.
$555
$399.00
Hard Drive Blank Kits
Hard Drive Kits
$358
$299.00
Networking
100 Gigabit Ethernet adapters


$487
$348.00
25 Gigabit Ethernet adapters


$207
$156.00


$585
$418.00


$385
$275.00
10 Gigabit Ethernet adapters


$760
$539.00


$105
$75.00


$175
$125.00


$385
$275.00


$223
$159.00
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
1 Gigabit Ethernet adapters


$145
$98.00


$84
$59.00


$185
$128.00


$349
$249.00
FlexibleLOM Adapters
$161
$115.00
InfiniBand
$675
$500.00
$273
$195.00
I/O Expansion Options

NOTE: Includes the tertiary riser kit.
$901
$630.00

NOTE: Occupies the primary riser slot. Includes a primary 4-port riser and a 4-port NVMe mezzanine card. The 4-port NVMe mezzanine card It goes on top of the HPE DL5x0 Gen10 CPU Mezzanine Board Kit (872222-B21) and requires a 3 or 4 processor configuration to support all 16 NVMe drives
NOTE: Must be selected if more than 8 NVMe drives are selected. It supports upto 16 NVMe drives
NOTE: Does not contain any additional PCIe slots.

NOTE: Secondary riser kit includes the tertiary riser kit.
NOTE: A maximum of 2 risers can be selected, 1 primary riser and another secondary riser (which includes tertiary riser kit).
NOTE: Risers are optional kits which can be utilized depending on riser and processor selection. Refer to
Power Supplies

NOTE: Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and include a C-14 power inlet connector that can support HPE Power Discovery Services (blue connector).
NOTE: 1600W Power supplies only support high line voltage (200VAC to 240VAC).
$213
$149.00

NOTE: 4x 800W power supplies must be selected.
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector
NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: (link)
$181
$129.00
NOTE: All power supplies in a server should match. Mixing Power Supplies is not supported.
NOTE: Option kits contain the specified power supply and a PDU IEC cable.
NOTE: HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power Distribution Units (PDUs). Visit HPE power cords for a full list of optional HPE power cords
NOTE: Check the power usage via the HPE Power Advisor Tool located at (link)
NOTE: A maximum of four GPU cards can be supported, two in primary riser expansion slots (4 and 6) and another two in secondary riser expansion slots (11 and 13). A GPU bracket (P00268-B21) kit is needed to install GPUs in slots 4 and 11 and must be be ordered along with the GPU cable kits 871828-B21 (for P6000) or 871829-B21 (for P40). Refer Expansion Slots sections for additional details on risers
NOTE: 1 cable kits supports three GPUs and two cable kits must be ordered when supporting four GPUs.
PCIe Workload Accelerator Options
HPE Write Intensive PCIe Workload Accelerator
HPE Mixed Use PCIe Workload Accelerator

NOTE: Please see the HPE PCIe Workload Accelerators for ProLiant Servers QuickSpecs for Technical Specifications and additional information.
Storage Controllers

Performance RAID Controllers
NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (875241-B21), which supports multiple devices and is sold separately.
NOTE: Only standup controllers are supported and there is no support for AROC controllers.
Essential RAID Controllers
Optional Software
$499
$388.00

NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers
$399
$349.00
Optional Upgrades

NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers.
$127
$89.00
Storage Options
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Converged Network Adapter
Rack Options
Rail Kits
USB and SD Options
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
$193
$138.00

NOTE: Please see the HPE Flash Media Kits QuickSpecs for additional information.
$431
$289.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc

NOTE: Ships with Performance Heatsink.
$15,290
$11,966.00

NOTE: Ships with Performance Heatsink.
$13,105
$10,256.00

NOTE: Ships with Performance Heatsink.
$5,998
$4,694.00

NOTE: Ships with Performance Heatsink
$6,550
$5,126.00

NOTE: Ships with Performance Heatsink.
$5,285
$4,136.00

NOTE: Ships with Performance Heatsink.
$8,735
$6,836.00

NOTE: Ships with Performance Heatsink.
$5,343
$4,181.00

NOTE: Ships with Performance Heatsink.
$7,643
$5,981.00

NOTE: Ships with Performance Heatsink.
$9,713
$7,601.00

NOTE: Ships with Performance Heatsink.
$3,756
$2,939.00

NOTE: Ships with Performance Heatsink.
$7,873
$6,161.00

NOTE: Ships with Performance Heatsink.
$8,126
$6,359.00
$4,032
$3,155.00

NOTE: Ships with Performance Heatsink.
$4,630
$3,623.00

NOTE: Ships with Performance Heatsink.
$628
$491.00

NOTE: Ships with Performance Heatsink.
$2,663
$2,084.00

NOTE: Ships with Performance Heatsink.
$2,170
$1,550.00

NOTE: Ships with Performance Heatsink.
$3,928
$3,074.00

NOTE: Ships with Performance Heatsink.
$1,743
$1,364.00

NOTE: Ships with Performance Heatsink.
$5,593
$3,995.00

NOTE: Ships with Performance Heatsink.
$2,233
$1,595.00

NOTE: Ships with Performance Heatsink
$570
$446.00

NOTE: Ships with Performance Heatsink.
$570
$446.00

NOTE: Ships with Performance Heatsink
$3,158
$2,471.00

NOTE: Ships with Performance Heatsink.
$1,088
$851.00

NOTE: Ships with Performance Heatsink.
$2,093
$1,495.00

NOTE: Ships with Performance Heatsink.
$547
$428.00

NOTE: Ships with Performance Heatsink.
$2,180
$1,706.00

NOTE: Ships with Performance Heatsink.
$536
$419.00
$1,557
$1,112.00

NOTE: If more than one processor is desired select one xxxxxx-L21 and one, two or three corresponding xxxxxx-B21 processors. Mixing different processor models is not supported.
$455
$356.00