HPE ProLiant DL560 Gen9 Parts
Maintain and upgrade your HPE ProLiant DL560 Gen9 with fully compatible enterprise-class components. This 4-socket 2U server is engineered for virtualization, data-intensive applications, and mission-critical workloads. Supporting Intel Xeon E5-4600 v3/v4 processors, DDR4 memory, and PCIe Gen3 expansion, the DL560 Gen9 offers a strong balance of performance and density.
Available DL560 Gen9 Parts:
- Memory: DDR4 ECC Registered DIMMs
- Drives: SAS and SATA SSDs and HDDs
- Storage Controllers: Smart Array RAID and HBA cards
- Networking: 1GbE and 10GbE adapters
- Power Supplies: Redundant hot-plug PSU modules
- Processors: Intel Xeon E5-4600 v3/v4 Series
✅ Looking for a specific DL560 Gen9 part? Browse the subcategories below or reach out to our team for assistance.
Memory
NOTE: Hewlett Packard Enterprise memory from previous generation servers is not qualified or warranted with this HPE ProLiant Server. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9.
NOTE: LRDIMM, RDIMM, UDIMM, and HDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen9 servers support LRDIMM, RDIMM and UDIMMs.
Registered DIMMs (RDIMMs)
Load Reduced DIMMs (LRDIMMs)
$193
$138.00
$134
$94.00
$203
$145.00
Drives
HPE Hard Disk Drives
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
$475
$358.00
$325
$249.00
12G SAS Hot Plug SFF (2.5-inch) Enterprise Drives
$261
$155.00
$161
$115.00
12G SAS Hot Plug SFF (2.5-inch) Midline Drives
6G SATA Hot Plug SFF (2.5 inch) SC Midline Hard Drives
6G SATA Hot Plug SFF (2.5-inch) SC 512e Drives
HPE Solid State Drives
To streamline the configuration process for HPE ProLiant Gen9 servers and to provide the best product availability, HPE recommends SSDs from the list located here: http://www.hpe.com/products/recommend
12G SAS Hot Plug SFF (2.5-inch) SC 512e Drives
$522
$348.00
$266
$178.00
$301
$215.00
12G SAS Hot Plug SFF (2.5-inch) SC Write Intensive Solid State Drives
$1,029
$700.00
$727
$527.00
12G SAS Hot Plug SFF (2.5-inch) Read Intensive Solid State Drives
$2,892
$1,981.00
$1,856
$1,588.00
$1,784
$1,293.00
$876
$635.00
$1,144
$823.00
$773
$533.00
$925
$647.00
12G SAS Hot Plug SFF (2.5-inch) SC Mixed Use Solid State Drives
$1,126
$889.00
$1,265
$937.00
$920
$695.00
$750
$536.00
$551
$405.00
$557
$379.00
$461
$329.00
6G SATA Hot Plug SFF (2.5-inch) Write Intensive Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives
$1,607
$1,148.00
$1,600
$1,250.00
$768
$533.00
$897
$623.00
$720
$518.00
$518
$375.00
$606
$433.00
$545
$371.00
$327
$237.00
$360
$245.00
$358
$245.00
$362
$266.00
$376
$254.00
Read Intensive – 6G SATA – M.2 – Solid State Drives
$998
$785.00
$858
$575.00
$126
$88.00
6G SATA Hot Plug SFF (2.5-inch) SC Mixed Use Solid State Drives
$1,211
$885.00
$925
$656.00
$693
$495.00
$477
$335.00
$482
$347.00
$456
$338.00
$455
$325.00
$337
$228.00
$625
$428.00
$322
$230.00
Networking
1 Gigabit Ethernet adapters
$145
$98.00
$84
$59.00
$185
$128.00
$349
$249.00
10 Gigabit Ethernet adapters
$105
$75.00
$175
$125.00
$255
$199.00
$105
$75.00
$105
$75.00
$223
$159.00
25 Gigabit Ethernet adapters
$207
$156.00
$273
$201.00
FlexibleLOM Adapters
$67
$48.00
$99
$75.00
$156
$109.00
$458
$344.00
Storage Controllers
SAS Controllers
HPE Flexible Smart Array Controllers
HPE Smart Host Bus Adapters
Optional Upgrades
Power Supplies
HPE Common Slot Power Supply Kits
NOTE: 94% efficiency with support for HPE Power Discovery Services.
NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor
NOTE: All power supplies in a server should match. Mixing Power Supplies is not supported.
NOTE: Option Kits contain the specified power supply and a PDU IEC cable.
NOTE: 1500W Power Supplies only support High Line Voltage.