HPE ProLiant DL580 G5 Parts

HPE ProLiant DL580 G5 Parts

HPE ProLiant DL580 G5 Parts

Unique Options

DL580 G5 SAS SFF 8-bay drive cage option thumb
NOTE: This option provides an additional 8 SFF drives for the DL580G5. This option requires an additional storage controller.
$149
$129.00
PCI Express x8 3-slot option card thumb
NOTE: Adds three PCI Express (X8) I/O slots.
$550
$495.00
PCI-X 3-slot option card thumb
NOTE: Adds three PCI-X I/O slots (2 64bit 100MHz slots, and 1 64bit 133MHz slot)
$229
$185.00
DL580 G5 Memory expansion boards option thumb
NOTE: This option consists of 4 memory expansion boards with 4 DIMM sockets each for a total of 16 additional DIMM sockets. This brings the DL580G5 to a total of 32 DIMM sockets.
$302
$240.00

Memory

The HPE ProLiant DL580 G5 (Generation 5) server comes standard with 4GB and supports up to 128GB of PC2-5300 (DDR2-667) memory, or 256GB with a memory expansion board kit. This maximum configuration is achieved by populating all 16 (or 32) slots with 8GB DIMMs. Global One Technology offers a 64GB kit, and it would take two of these kits (or four with the expansion kit installed) to max out the memory on your DL580 G5 server. The complete list of DL580 G5 memory options is shown below. Contact us via Live Chat with with questions.

DL580 G5 PC2-5300 Memory

Memory Board Upgrade Option

DL580 G5 memory expansion boards option thumb
NOTE: This option consists of 4 memory expansion boards with 4 DIMM sockets each for a total of 16 additional DIMM sockets. This brings the DL580G5 to a total of 32 DIMM sockets.
$302
$240.00
NOTE: Memory Option Kits include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, please visit:

Optical Media

Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) thumb
NOTE: For models equipped with 7200 and 7300-series CPUs.
$55
$39.00
HPE DVD±R/RW 8X Slim thumb
NOTE: For models equipped with 7200 and 7300-series CPUs.
$194
$175.00
HPE Slim SATA DVD-ROM Optical Drive thumb
NOTE: For models equipped with 7400-series CPUs.
$100
$75.00
HPE Slim SATA DVD RW Optical Drive thumb
NOTE: For models equipped with 7400-series CPUs.
$54
$39.00

Drives

The HPE ProLiant DL580 G5 (Generation 5) server can support up to eight (8) 2.5" SFF (small form factor) hot plug hard drives, or up to 16 with the expansion cage kit.

You can use either SAS or SATA drives in the DL580 G5. Most customers opt for Enterprise SAS drives due to the superior performance - faster data transfer rates and spindle speeds. See the full list of available drives below. Feel free to contact us via Live Chat with with questions about hard drives for DL580G5 servers.

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives

12G 15K Drives

12G 10K Drives

6G 15K Drives

6G 10K Drives

3G 15K Drives

3G 10K Drives

SAS Hot Plug 2.5" SFF Midline (MDL) Drives

SATA Hot Plug 2.5" SFF Midline (MDL) Drives

SATA Hot Plug 2.5" SFF Entry (ETY) Drives

SATA Hot Plug 2.5" Midline (MDL) Solid State Drives

Networking

Gigabit Ethernet Adapters

10 Gigabit Ethernet Adapters

NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.

Power Supplies

NOTE: DC power supplies contain a -48V DC power cord designed for in rack DC power rectifiers.
NOTE: Two Hot Plug Power Supplies needed for standard operation. Four Hot Plug Power Supplies needed to add redundancy. Configurations with 3 or 4 processors that will use lowline (110V) input power require four Hot Plug Power Supplies.

Storage Controllers

SAS Controllers

Smart Array E200 Controller

Smart Array E500 Controller

Smart Array P400 Controller

Smart Array P600 Controller

Smart Array P800 Controller

Smart Array P212 Controller

Smart Array P410 Controller

Smart Array P411 Controller

Smart Array P812 Controller

Optional Upgrades

128MB Battery-Backed Write Cache thumb
NOTE: Supports the Smart Array E200 Controller and Smart Array 642 Controller.
$88
$65.00
HPE SA-P400 and SA-E500 24 In Battery Cable Kit thumb
NOTE: This option kit contains a 24" battery cable and adhesive material for installing a battery into the server if a Smart Array P400 is integrated outside of the factory or if the BBWC is not pre-installed from the factory. For all solutions, please refer to the server QuickSpecs and User's Manual for detailed installation instructions.
$95
$75.00
512MB Battery-backed write cache upgrade thumb
NOTE: For Smart Array P400 Controller only.
$166
$129.00
Battery-backed write cache upgrade thumb
NOTE: For Smart Array P400 Controller only.
$157
$118.00
256 MB Cache Module thumb
NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00
512MB BBWC thumb
NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
$173
$129.00

SAS Controller Options

SAS HBA

NOTE: When using the SC44Ge with SATA hard drives, 1.5G SATA models are required.
NOTE: When using the 8 Internal Port SAS HBA with SATA hard drives, 1.5G SATA models are required.

SCSI Controllers for External Drive/Storage Support

NOTE: Supports the Smart Array 641, and Smart Array 642 Controller.

SCSI HBA

HPE SC11Xe Host Bus Adapter thumb
NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00

Processors

NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit.
NOTE: All CPU Kits come complete with heatsink, fan(s), etc

Six-Core Processors

Quad-Core Processors

Dual-Core Processors

Compare Selected