HPE ProLiant SL335s G7 Parts
Unique Options

NOTE: Node blank is needed when removing half width tray for service.
NOTE: Node blank is needed when not completely filling s6500 chassis.
NOTE: 1 node blank kit is needed for every 1U half width space left in chassis.

NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$92
$65.00

NOTE: It is required that the entire chassis be filled with fans - Part number only contains 1 fan, 8 must be purchased.
$82
$62.00
$3,381
$2,450.00

NOTE: This kit must be included if ordering any BBWC option for the Smart Array Controller.

NOTE: This kit provides the cable for connecting the Smart Array P410 Controller to the system board.

NOTE: This kit provides the cable for connecting the Smart Array P212 Controller to the system board.

NOTE: This kit includes the hardware that holds the stacked SFF HDDs and power cables and is required when ordering SFF HDDs. Order one kit for every two SFF HDDs.

NOTE: This kit includes the cables for attaching the 5th and 6th SATA SFF HDDs. This kit is not needed if only attaching up to 4 SATA SFF HDDs.
$156
$124.00
$142
$113.00
Memory
Registered DIMMs (RDIMMs)
$66
$49.00
$95
$77.00
$68
$49.00
$94
$76.00
$100
$75.00
Unbuffered with ECC DIMMs (UDIMMs)
$83
$67.00
$243
$219.00
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 1 quad rank DIMM and 2 dual rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: To support HPE hard drives exceeding 2.2TB, a HPE Smart Array Controller is required.
NOTE: The non-hot plug hard drives use a quick release carrier.
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives - with quick-release (QR) carrier
NOTE: the HPE s6500 SFF Enablement Kit (607247-B21) must be ordered when ordering SFF HDDs. This kit includes the hardware which holds two SFF HDDs and includes the power cable for the drives. Order one kit for every 2 SFF HDDs.
SAS Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives - with quick-release (QR) carrier
NOTE: the HPE s6500 SFF Enablement Kit (607247-B21) must be ordered when ordering SFF HDDs. This kit includes the hardware which holds two SFF HDDs and includes the power cable for the drives. Order one kit for every 2 SFF HDDs.
SATA Non-Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives - with quick-release (QR) carrier
$599
$428.00
$621
$438.00
Power Supplies
NOTE: - Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at:- (link)

NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
$244
$168.00
Storage Controllers
NOTE: To support HPE hard drives exceeding 2.2TB, HPE Smart Array Firmware version 5.0 or later is required for the P212 and P410 controllers.
SAS Controllers
Smart Array P212 Controller
NOTE: The HPE SAS/PWR Cable P212 Half Width Kit (658608-B21) is required when using the P212 controller.
Smart Array P410 Controller
NOTE: The HPE s6500 SAS Enablement Kit (610682-B21) is required when using the P410 Controller.
$94
$71.00
Optional Upgrades

NOTE: Supported on HPE Smart Array P410 Controller only.
$173
$129.00
$53
$39.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc