HPE ProLiant ML350 Gen9 Parts

HPE ProLiant ML350 Gen9 Parts

HPE ProLiant ML350 Gen9 Parts

Keep your HPE ProLiant ML350 Gen9 tower server running reliably with our full range of upgrade and replacement parts. Designed for SMB and enterprise deployments, the ML350 Gen9 delivers excellent scalability, performance, and versatility.

Available ML350 Gen9 Parts:

  • Memory: DDR4 ECC Registered RDIMM and LRDIMM
  • Drives: SAS, SATA, and select NVMe SSDs
  • Storage Controllers: Smart Array RAID and HBAs
  • Networking: PCIe Ethernet NICs
  • Power Supplies: Hot-plug redundant PSU options
  • Processors: Intel Xeon E5-2600 v3/v4 Series

Looking for a specific ML350 Gen9 part? Browse subcategories below or contact us for help.

Unique Options

HPE ML350 Gen9 8LFF Hot Plug Drive Cage Kit thumb
NOTE: Add’l 8LFF Hard Drive Cage/backplane assembly, allowing for up to 24FF Drive Bays.
$280
$197.00
HPE ML350 Gen9 8SFF Hard Drive Cage Kit thumb
NOTE: Add’l 8SFF Hard Drive Cage/Backplane assembly, allowing for up to 48SFF Drive Bays.
$398
$275.00
HPE ML350 Gen9 Redundant Fan Kit thumb
NOTE: This kit consists of four add’l system fans and two PCIe air baffles to support fan redundancy.
$232
$157.00
HPE ML350 Gen9 LFF Media Cage Kit thumb
NOTE: Cage for converting LFF drive bays to a media device. Supports 1*Half-Height tape storage/ Disk-Based Backup device. (RDX)
$650
$485.00
HPE ML350 Gen9 SFF Media Cage Kit thumb
NOTE: Cage for converting SFF drive bays to a media device. Supports 2*Half-Height/ 1*Full-Height tape storage/ Disk-Based Backup device (RDX).
$612
$450.00
HPE ML350 Gen9 Flexible Smart Array Controller Mini-SAS Cable Kit thumb
NOTE: Mini-SAS Cable Kit for Flexible Smart Array Controller (AROC).
HPE ML350 Gen9 Smart Array Cable Kit thumb
NOTE: Mini-SAS Cable Kit for stand-up P-series Smart Array Card.
HPE ML350 Gen9 Mini SAS Cable FIO Kit thumb
NOTE: Required to support B140i embedded SATA controller
NOTE: FIO indicates factory integrated option for CTO order only.
HPE ML350 Gen9 Graphic Card Support Kit thumb
NOTE: Required to support graphic accelerators except for K2200.
HPE ML350 Gen9 Tower to Rack Conversion Kit thumb
NOTE: For converting a tower model to a rack model. It is consist of a 5U rail kit, cable management arm (CMA) and rack enablement kit (rack ear, rack handle, SID blank etc).
HPE Security Bezel Kit thumb
NOTE: For ML350 Rack model only.
$290
$240.00
HPE 12Gb SAS Expander Card for ML350 Gen9 thumb
NOTE: The SAS Expander card supports 24 drives. The SAS Expander card must be used in conjunction with an HPE Smart Array P840 or P440 controller, or an H240 Host Bus Adapter. The SAS Expander card cannot be connected to H240ar or P440ar Flexible Smart Array Controller cards.
NOTE: The SAS Expander kit includes two cables to connect from the Smart Array controller or HBA to the SAS Expander and the other to connect from the Expander to the HDD backplane.
NOTE: It DOES NOT support tape storage/ Disk-Based Backup device (RDX).
HPE ML350 Gen9 2nd Expander FIO Kit thumb
NOTE: 2nd Expander FIO Kit (769637-B21) is for factory integrated only and support for 25-48 HDDs, CANNOT be selected when the 1st Expander Kit (769635-B21) is not in order.
NOTE: When 769637-B21 (2nd Expander FIO Kit) is selected, then 2nd CPU (-B21 processor)
NOTE: Can't support tape storage/ Disk-Based Backup device (RDX).
HPE ML350 Gen9 X4 RPS Enablement Kit thumb
NOTE: ML350 Gen9 supports max. four Power Supply slots. If Power supply selection qty is more than two, then X4 RPS Enablement Kit must be selected - to support the 3rd and 4th Power Supply Units. Minimum Power Supply qty. selection to configure with X4 RPS Enablement Kit is three.
NOTE: And this option is not supported with 720478-B21 (HPE 500W FS Plat Ht Plg Pwr Supply Kit).
NOTE: If hard drive cage selection qty. is more than three, this X4 RPS Enablement Kit must be selected - to get proper qty. of HDD backplane power connectors.
NOTE: If DW GPU card selection qty. is more than two, this X4 RPS Enablement Kit MUST be selected - in order to get proper qty. of GPU external power connectors.
HPE ML350 Gen9 NVMe 6 Solid State Drive Express Bay Enablement Kit thumb
NOTE: Support for SFF chassis SKU only. Maximum installation of NVMe express bay in ML350 Gen9 is one - installation limited to Box 1 or Box 4 for optimized cooling, which supports up to 6 SFF NVMe PCIe SSDs.
NOTE: One express bay bridge card is included in the enablement kit, with installation limited to PCIe slot 3, 6 or 8. If slot 6 or 8 is selected, a 2nd processor must be installed.
NOTE: For NVMe PCIe SSD selection, refer to drive section in this document.

Memory

Memory for E5-2600v4 Series

Registered DIMMs (RDIMMs) for E5-2600v4 Series

Load Reduced DIMMs (LRDIMMs) for E5-2600v4 Series

HPE Persistent Memory (NVDIMM) for E5-2600v4 Series

NOTE: The following memory is supported by the E5-2600v4 series Processor only.
HPE 8GB NVDIMM Single Rank x4 DDR4-2133 Module thumb
NOTE: A maximum of 16 NVDIMMs can be supported. NVDIMMs cannot be used with LRDIMMs.
NOTE: NVDIMMs only supported on factory configured servers with E5-2600 v4 processors, not supported on servers upgraded from E5-2600 v3 to E5-2600 v4 processors.
$192
$136.00

Memory for E5-2600v3 Series

Drives

NOTE: For a complete list of the drive, controller and cable options please check the compatibility matrix: (link)

Hard Disk Drives

12G SAS Hot Plug LFF 3.5in Enterprise HDD

12G SAS Hot Plug LFF 3.5in Midline HDD

6G SATA Hot Plug LFF 3.5in Midline HDD

6G SATA Hot Plug LFF 3.5in Mixed Use SSD

12G SAS Hot Plug SFF 2.5in Enterprise HDD

12G SAS Hot Plug SFF 2.5in Midline HDD

6G SATA Hot Plug SFF 2.5in Midline HDD

Solid State Drives

12G SAS Hot Plug SFF 2.5in Read Intensive SSD

12G SAS Hot Plug SFF 2.5in Write Intensive SSD

12G SAS Hot Plug LFF 3.5in Mixed Use SSD

12G SAS Hot Plug SFF 2.5in Mixed Use SSD

6G SATA Hot Plug WI-3 SFF 2.5in SC SSD

6G SATA Hot Plug SFF 2.5in Mixed Use SSD

6G SATA Hot Plug LFF 3.5in Mixed Use SSD

Mixed Use - 6G SATA - M.2 - SSD

6G SATA Hot Plug LFF 3.5in SC Read Intensive SSD

6G SATA Hot Plug SFF 2.5in SC Read Intensive SSD

Read Intensive - 6G SATA - M.2 - SSD

HPE NVMe PCIe Read Intensive SFF (2.5 inch) SSD

HPE 480GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN Digitally Signed Firmware SSD thumb
NOTE: ML350 Gen9 6SFF Express Bay Enablement Kit (726551-B21) is required to support these drives.
NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the HPE Solid State Drive QuickSpecs.
$816
$563.00

HPE NVMe PCIe Mixed Use SSDs

HPE 400GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN Digitally Signed Firmware SSD thumb
NOTE: ML350 Gen9 6SFF Express Bay Enablement Kit (726551-B21) is required to support these drives.
NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the HPE Solid State Drive QuickSpecs.
$448
$320.00

M.2 SSD

HPE Universal SATA HHHL M.2 Kit thumb
NOTE: M.2 SSD ML-DL Enablmt Kit can be used to build RAID 0, 1 by using B140i controller.
- When HPE 120GB or 340GB M.2 SSD ML-DL Dual Enablmt Kit is ordered, it can support RAID 0, 1.
- When HPE 120GB or 340GB M.2 SSD ML-DL Sngl Enablmt Kit is ordered, it can support RAID 0.
NOTE: M.2 SSD ML-DL Enablmt Kit CANNOT support RAID setting when AROC card (P440ar or H240ar) is selected. Embedded B140i controller CANNOT be used when AROC is ordered.
$358
$299.00

Hard Drive Blank Kits

Hard Drive Kits

Networking

1 Gigabit Ethernet adapters

HPE Ethernet 1Gb 4-port 331T Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
pdf icon Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
HPE Ethernet 1Gb 2-port 361T Adapter thumb
pdf icon Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
HPE Ethernet 1Gb 2-port 332T Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
pdf icon Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00
HPE Ethernet 1Gb 4-port 366T Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
pdf icon Quickspecs for 811546-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.1 x4
$349
$249.00

10 Gigabit Ethernet adapters

25 Gigabit Ethernet adapters

$207
$156.00
HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter thumb
NOTE: The ML350 Gen9 ships with 4x1Gb ports Embedded.
$273
$201.00

Power Supplies

HPE Flex Slot Hot-plug Power supplies

HPE ML350 Gen9 X4 RPS Enablement Kit thumb
NOTE: If Power supply selection qty is more than two, then X4 RPS Enablement Kit must be selected (minimum Power Supply qty. selection to configure with X4 RPS Enablement Kit is three).
NOTE: And this option is not supported with 720478-B21 (HPE 500W FS Plat Ht Plg Pwr Supply Kit).
NOTE: If hard drive cage selection qty. is more than three, this X4 RPS Enablement Kit must be selected - to get proper qty. of HDD backplane power connectors.
NOTE: If DW GPU card selection qty. is more than two, this X4 RPS Enablement Kit MUST be selected - in order to get

Computation and Graphics Accelerators

HPE ML350 Gen9 Graphic Card Support Kit thumb
NOTE: One Graphic Card Support Kit- 726565-B21 is required for each computation or graphics accelerator except for K2200 or M2000.
NVIDIA Tesla K40C 12GB Computational Accelerator thumb
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
NOTE: If this SKU is selected then minimum quantity = 2 of 800W Power Supply Kit (725870-B21)
HPE AMD FirePro W7100 Accelerator Kit thumb
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
HPE NVIDIA Quadro M4000 Graphics Accelerator thumb
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
NOTE: Only supported with E5-2600v4 processors.
HPE NVIDIA Quadro M5000 Graphics Accelerator thumb
NOTE: A maximum of four of these cards can be selected. Each requires one Graphic Card Support Kit (726565-B21).
NOTE: Only supported with E5-2600v4 processors.
HPE NVIDIA Quadro P4000 Graphics Accelerator thumb
NOTE: A maximum of four of these cards can be selected.
NOTE: Only supported with E5-2600v4 processors.
NOTE: If more than two Double Wide Graphics options are selected, then HPE ML350 Gen9 X4 RPS Enablement
NOTE: Only the above listed Graphics cards are HPE standard supported options in this server.
NOTE: The NVIDIA Quadro modules are supported only on 64-bit versions of Linux and Windows operating systems as well as on Virtual Machine client operating systems. The supported bare metal operating systems are RHEL6, SLES 11 and Windows Server 2012 R2.
NOTE: Please see the HPE Power Advisor for estimated power consumption of your individual system configuration prior to installing GPUs. The HPE Power Advisor is located at: (link)
NOTE: All GPU Accelerators are restricted to equal less than 1024GB for system HOST memory.

Cooling Options

HPE ML350 Gen9 Redundant Fan Kit thumb
NOTE: This kit consists of four
$232
$157.00

Storage Controllers

Smart Array Guide

SAS Controllers

HPE Flexible Smart Array Controllers

HPE Smart Array P440ar/2GB FBWC 12Gb 2-ports Int SAS Controller<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: Includes the HPE Smart Storage Battery.
$183
$128.00
HPE Smart Array P440ar/2GB FBWC 12Gb 2-ports Int FIO SAS Controller thumb
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: Includes the HPE Smart Storage Battery.
NOTE: FIO indicates factory integrated option via CTO.
$183
$128.00

HPE Smart Array Controllers

HPE Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
NOTE: Provides support for up to 8 internal SAS/SATA drives, consumes 1 PCIe slot.
$156
$109.00
HPE Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller thumb
NOTE: Includes the HPE Smart Storage Battery.
NOTE: FIO indicates factory integrated option via CTO.
$376
$285.00
HPE Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller thumb
NOTE: Includes the HPE Smart Storage Battery.
NOTE: FIO indicates factory integrated option via CTO.
$213
$149.00

HPE Smart Host Bus Adapters

HPE H240ar 12Gb 2-ports Int Smart Host Bus Adapter thumb
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
$109
$82.00
HPE H240ar 12Gb 2-ports Int FIO Smart Host Bus Adapter thumb
NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
NOTE: FIO indicates factory integrated option via CTO.
$99
$69.00
HPE H240 12Gb 2-ports Int FIO Smart Host Bus Adapter thumb
NOTE: FIO indicates factory integrated option via CTO.
$120
$84.00

Optional Upgrades

HPE 12Gb SAS Expander Card for ML350 Gen9 thumb
NOTE: The SAS Expander card supports 24 drives. The SAS Expander card must be used in conjunction with an HPE Smart Array P440 or P840 controller, or an H240 Host Bus Adapter. The SAS Expander card cannot be connected to H240ar or P440ar Flexible Smart Array Controller (AROC) cards. The SAS Expander kit includes two cables to connect from the Smart Array controller or HBA to the SAS Expander and the other to connect from the Expander to the HDD backplane.
NOTE: It DOES NOT support tape storage/ Disk-Based Backup device (RDX).
HPE ML350 Gen9 2nd Expander Card thumb
NOTE: The ML350 Gen9 2nd Expander Card must be used in conjunction with ML350 Gen9 SAS Expander kit (769635-B21, see config. guideline
NOTE: This kit DOES NOT support tape storage or disk-based backup devices (RDX) either.
HPE 96W Smart Storage Battery 145mm Cbl for DL/ML/SL Servers<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
NOTE: New part number P01366-B21 to replace the older part 727258-B21.
$145
$109.00

HPE Cable Options

HPE ML350 Gen9 Flexible Smart Array Controller Mini-SAS Cable Kit thumb
NOTE: Mini-SAS Cable Kit for Flexible Smart Array (AROC) Controller.
HPE ML350 Gen9 Smart Array Cable Kit thumb
NOTE: Mini-SAS Cable Kit for stand-up P-series Smart Array Card.
HPE ML350 Gen9 Mini SAS Cable FIO Kit thumb
NOTE: Required to support B140i embedded SATA controller.
NOTE: FIO indicates factory integrated option for CTO order.

Tape Backup

Tape Drives

HPE Tape Storage Systems

HPE StoreEver MSL6480

HPE StoreEver MSL6480 Scaleable Expansion Module thumb
NOTE: Please see the HPE StoreEver MSL6480 Tape Library QuickSpecs for Technical Specifications and additional information.
$16,500
$12,500.00

Storage Options

Emulex Fibre Channel HBAs

QLogic Fibre Channel HBAs

Converged Network Adapter

Processors

NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit.
NOTE: All CPU Kits come complete with heatsink, fan(s), etc

E5-2600v4 series Processors

E5-2600v3 series Processors

Compare Selected