HPE ProLiant DL580 G7 Parts
Unique Options

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
MX$4,005
MX$2,819.09

NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
MX$24,633
MX$16,525.70
MX$1,497
MX$1,205.40
Memory
Registered DIMMs (RDIMMs)
MX$953
MX$738.80
MX$1,050
MX$738.80
MX$1,575
MX$1,263.73
MX$1,089
MX$758.24
MX$1,303
MX$933.22
MX$1,089
MX$758.24
MX$1,303
MX$933.22
MX$3,908
MX$2,294.16
NOTE: PC3L DIMMs are only supported with the Intel® Xeon® Processor E7 series processors and require (E7) memory cartridge.
NOTE: PC3L is a low-voltage memory.
Memory Board Upgrade Option

NOTE: Four memory cartridges come standard in the HPE ProLiant DL580 G7 (E7) Configure-to-order Server (643086-B21), each kit contains one cartridge and a maximum of (8) are supported in the server. See Memory Performance Optimization in the Memory section for configuration guidelines.
MX$1,225
MX$952.66
Optical Media
MX$1,050
MX$758.24
NOTE: Optical drives are ejectable.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
MX$8,282
MX$4,860.50
MX$9,332
MX$6,318.65
MX$4,452
MX$3,207.93
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
MX$7,019
MX$4,121.70
MX$5,172
MX$3,032.95
MX$9,429
MX$6,785.26
MX$5,813
MX$4,063.38
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
MX$2,314
MX$1,652.57
MX$1,147
MX$816.56
MX$1,225
MX$874.89
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
MX$2,216
MX$1,555.36
MX$2,527
MX$1,846.99
MX$1,828
MX$1,069.31
MX$2,314
MX$1,652.57
MX$1,828
MX$1,069.31
MX$2,489
MX$1,458.15
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
MX$1,244
MX$874.89
MX$1,283
MX$933.22
MX$1,594
MX$1,069.31
MX$2,022
MX$1,633.13
MX$2,158
MX$1,516.48
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
MX$1,147
MX$874.89
MX$1,361
MX$952.66
MX$1,633
MX$952.66
MX$1,205
MX$855.45
MX$1,050
MX$758.24
MX$1,536
MX$1,069.31
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
MX$680
MX$486.05
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
MX$3,150
MX$1,846.99
MX$3,616
MX$2,488.58
MX$680
MX$486.05
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
MX$3,247
MX$1,905.32
MX$1,614
MX$1,127.64
MX$5,599
MX$4,277.24
MX$680
MX$369.40
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
MX$7,388
MX$5,813.16
MX$3,616
MX$2,624.67
Networking
Gigabit Ethernet Adapters
MX$1,322
MX$952.66
MX$1,575
MX$1,147.08
MX$2,041
MX$1,477.59
MX$3,130
MX$2,235.83
MX$1,400
MX$1,069.31
MX$2,158
MX$1,535.92
10 Gigabit Ethernet Adapters
NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
MX$1,789
MX$1,458.15
MX$1,925
MX$1,341.50
MX$2,022
MX$1,458.15
I/O Expansion Options

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
MX$4,005
MX$2,819.09

NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
MX$24,633
MX$16,525.70
Power Supplies
NOTE: The HPE ProLiant DL580 G7 does an inventory of the system configuration to determine what level of redundancy the power supply configuration supports based on some configuration assumptions. The level of redundancy will be reported during the system power on. For planning purposes you can use the Power Advisor (https://paonline56.itcs.hpe.com/) which is more accurate to determine the power requirements. Also, there is an RBSU override switch capability that allows the user to override the base setting if the Power Advisor indicates redundancy with their configuration.
MX$3,577
MX$2,683.00
Storage Controllers
SAS Controllers
Smart Array P212 Controller
MX$1,575
MX$1,069.31
MX$1,419
MX$1,127.64
Smart Array P411 Controller
MX$6,727
MX$3,946.73
MX$9,721
MX$6,513.07
MX$9,954
MX$7,562.94
MX$10,149
MX$7,757.36
Smart Array P812 Controller
MX$3,150
MX$1,846.99
Optional Upgrades

NOTE: Supported on HPE Smart Array P411 Controller only.
MX$3,363
MX$2,508.02
MX$1,030
MX$758.24
MX$1,303
MX$933.22
SAS HBA

NOTE: This is a 2 x4 External Port HBA
NOTE: This is only approved for the HPE StorageWorks P2000 G3 SAS Modular Smart Array.
MX$3,052
MX$2,119.18
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
MX$4,938
MX$2,896.86
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Eight-Core Processors
MX$2,800
MX$2,216.39
MX$11,082
MX$7,854.57
MX$1,964
MX$1,555.36
Six-Core Processors
MX$19,209
MX$13,628.84
MX$6,571
MX$4,646.64
MX$17,848
MX$12,656.74
Quad-Core Processors
MX$3,169
MX$2,255.27
NOTE: Above processor kits contain one processor each.