HPE ProLiant DL580 G7 Parts
Unique Options

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
$206
$145.00

NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
$1,267
$850.00
$77
$62.00
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$54
$38.00
$81
$65.00
$56
$39.00
$67
$48.00
$56
$39.00
$67
$48.00
$157
$118.00
NOTE: PC3L DIMMs are only supported with the Intel® Xeon® Processor E7 series processors and require (E7) memory cartridge.
NOTE: PC3L is a low-voltage memory.
Memory Board Upgrade Option

NOTE: Four memory cartridges come standard in the HPE ProLiant DL580 G7 (E7) Configure-to-order Server (643086-B21), each kit contains one cartridge and a maximum of (8) are supported in the server. See Memory Performance Optimization in the Memory section for configuration guidelines.
$63
$49.00
Optical Media
$54
$39.00
NOTE: Optical drives are ejectable.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$144
$98.00
$83
$58.00
$288
$220.00
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
Networking
Gigabit Ethernet Adapters
$81
$59.00
$161
$115.00
$72
$55.00
$111
$79.00
10 Gigabit Ethernet Adapters
NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
I/O Expansion Options

NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
$206
$145.00

NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
$1,267
$850.00
Power Supplies
NOTE: The HPE ProLiant DL580 G7 does an inventory of the system configuration to determine what level of redundancy the power supply configuration supports based on some configuration assumptions. The level of redundancy will be reported during the system power on. For planning purposes you can use the Power Advisor (https://paonline56.itcs.hpe.com/) which is more accurate to determine the power requirements. Also, there is an RBSU override switch capability that allows the user to override the base setting if the Power Advisor indicates redundancy with their configuration.
$184
$138.00
Storage Controllers
SAS Controllers
Smart Array P212 Controller
Smart Array P411 Controller
Smart Array P812 Controller
Optional Upgrades

NOTE: Supported on HPE Smart Array P411 Controller only.
$173
$129.00
$53
$39.00
$67
$48.00
SAS HBA

NOTE: This is a 2 x4 External Port HBA
NOTE: This is only approved for the HPE StorageWorks P2000 G3 SAS Modular Smart Array.
$157
$109.00
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Eight-Core Processors
Six-Core Processors
Quad-Core Processors
NOTE: Above processor kits contain one processor each.