HPE ProLiant DL325 Gen10 Parts
Upgrade and maintain your HPE ProLiant DL325 Gen10 server with trusted enterprise parts. Built on the AMD EPYC platform, the DL325 Gen10 is a powerful 1U single-socket solution optimized for virtualization, storage, and high-performance workloads.
Available DL325 Gen10 Parts:
- Memory: DDR4 ECC Registered RDIMM and LRDIMM
- Drives: SATA, SAS, and NVMe SSDs and HDDs
- Storage Controllers: RAID and HBA cards
- Networking: PCIe and OCP NICs
- Power Supplies: Redundant hot-plug Flex Slot PSUs
- Processors: AMD EPYC 7001 & 7002 Series
✅ Looking for a specific DL325 Gen10 part? Browse subcategories below or contact us for expert help.
Unique Options
NOTE: This riser cannot be used when Modular Smart Array is chosen.
NOTE: This option provides support for up to 2 NVMe drives, and can only be populated in SFF or NVMe model only.
NOTE: This option can be selected only on 8SFF CTO or NVMe SFF CTO.
NOTE: This is an Field Upgrade option only.
NOTE: This option kit will enable 2SFF SAS/SATA drives.
NOTE: This option kit contains the necessary cables to connect to controllers
NOTE: This kit would take up the position of Slot 3 and thus cannot be selected in conjunction with Low Profile Riser Kit.
NOTE: This option kit requires addition of standard fans if 4LFF model is chosen
NOTE: This option kit requires addition of performance fans if 8LFF model is chosen
Memory
To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability, HPE recommends memory from the list located here: http://www.hpe.com/products/recommend
$162
$113.00
$277
$198.00
$389
$263.00
$525
$375.00
$196
$138.00
$557
$392.00
NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification testing.
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
$2,485
$1,750.00
Optical Media
$103
$75.00
$185
$159.00
NOTE: This cable kit must be selected if Optical Drive is chosen on the 4LFF CTO Model
NOTE: This is only supported on USB 3.0 ports.
$385
$275.00
NOTE: This enablement kit must be selected if Optical Drive is chosen on the 8SFF or NVMe CTO Model
$193
$138.00
Drives
Hard Disk Drives - 2.5in SFF SAS
Enterprise - 12G SAS - SFF HDD
$522
$348.00
$266
$178.00
$235
$168.00
$475
$358.00
$325
$249.00
$161
$115.00
$196
$147.00
Midline - 12G SAS - SFF HDD
Hard Disk Drives - 2.5in SFF SATA
Midline - 6G SATA - SFF HDD
Hard Disk Drives - 3.5in LFF SAS
Enterprise - 12G SAS - LFF HDD
Midline - 12G SAS - LFF HDD
$1,379
$985.00
$809
$595.00
$699
$468.00
$469
$353.00
$274
$196.00
Hard Disk Drives - 3.5in LFF SATA
Midline - 6G SATA - LFF HDD
$1,215
$888.00
$923
$675.00
$790
$558.00
$681
$476.00
$485
$348.00
Solid State Drives - 2.5in SFF SAS
For SSD selection guidance, please visit https://ssd.hpe.com/
Read Intensive - 12G SAS - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$2,981
$2,129.00
$2,867
$2,108.00
$2,325
$1,661.00
$1,721
$1,229.00
$2,913
$2,158.00
$1,733
$1,238.00
$1,733
$1,238.00
$1,778
$1,252.00
$1,040
$743.00
Read Intensive - 12G SAS - SFF - SC Value SAS DS SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$4,570
$3,264.00
$1,659
$1,202.00
Write Intensive - 12G SAS - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$987
$700.00
$1,050
$775.00
$1,050
$745.00
Mixed Use - 12G SAS - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$3,614
$2,442.00
$2,388
$1,725.00
$2,360
$1,662.00
$1,845
$1,387.00
$1,799
$1,285.00
$1,368
$977.00
$998
$829.00
$839
$599.00
$839
$599.00
$833
$626.00
$498
$356.00
$536
$383.00
$662
$473.00
Mixed Use - 12G SAS - SFF - SC Value SAS DS SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$2,180
$1,775.00
$1,136
$806.00
$2,376
$1,697.00
Solid State Drives - 2.5in SFF SATA
Read Intensive - 6G SATA - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,872
$1,337.00
$1,872
$1,337.00
$1,582
$1,130.00
$1,544
$1,103.00
$1,582
$1,130.00
$1,452
$1,052.00
$1,529
$1,047.00
Mixed Use - 6G SATA - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,506
$1,076.00
$1,506
$1,076.00
$1,588
$1,219.00
$1,457
$1,041.00
$1,361
$986.00
$939
$671.00
$767
$548.00
$1,229
$842.00
$923
$664.00
$574
$410.00
$448
$320.00
$462
$337.00
$500
$340.00
$486
$347.00
$329
$235.00
$531
$371.00
$517
$372.00
Very Read Optimized - QLC-NAND SATA - SFF - SSD
$2,150
$1,689.00
$1,910
$1,364.00
Solid State Drives - 3.5in LFF SAS
Mixed Use - 12G SAS - LFF -SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,165
$832.00
Mixed Use - 12G SAS - LFF - SC Value SAS DS SSD
Solid State Drives - 3.5in LFF SATA
Read Intensive - 6G SATA - LFF - SSD
Mixed Use - 6G SATA - LFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,235
$908.00
$669
$478.00
$410
$293.00
Solid State Drives - SATA M.2
Read Intensive - 6G SATA - M.2 - Solid State Media (2280 type)
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
Notes:
M.2 drives supported in the Primary Riser and use S100i SATA controller only.
M.2 supports Software RAID only.
$473
$338.00
Internal Dual M.2 Kit
Notes: This is a M.2 enablement standup card.
$358
$299.00
Dual Read Intensive - 6G SATA - UFF SCM M.2 - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
Notes: SCM dual drive functionality supported on the Premium 2SFF HDD Kit (826687-B21) and 2SFF HDD Riser Kit (826688-B21). Installation on any other bay will show one M.2 drive per bay
$1,260
$985.00
Dual Mixed Use - 6G SATA - UFF SCM M.2 - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
Notes: SCM dual drive functionality supported on the Premium 2SFF HDD Kit (826687-B21) and 2SFF HDD Riser Kit (826688-B21). Installation on any other bay will show one M.2 drive per bay.
Solid State Drives - NVMe
Read Intensive - NVMe - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$11,875
$9,500.00
$11,360
$7,585.00
$9,641
$6,649.00
$12,648
$8,546.00
$1,498
$1,119.00
$4,949
$3,437.00
$2,498
$1,759.00
$2,573
$1,878.00
$1,953
$1,395.00
$1,996
$1,468.00
$2,207
$1,554.00
$927
$755.00
$2,542
$1,829.00
$1,230
$899.00
$1,289
$985.00
$1,105
$762.00
$855
$598.00
$683
$488.00
$819
$598.00
$1,083
$768.00
$840
$599.00
$1,484
$1,045.00
Write Intensive - NVMe - SFF - SSD
Mixed Use - NVMe - SFF - SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$9,805
$6,716.00
$5,921
$4,028.00
$4,424
$3,183.00
$7,906
$5,378.00
$5,022
$3,587.00
$3,200
$2,162.00
$1,305
$932.00
$1,842
$1,279.00
$1,632
$1,174.00
$769
$549.00
Notes:
A NVME (826689-B21 or 873781-B21) or Premium (826690-B21) drive cage is required to support these drives in conjunction with a NVMe riser kit.
HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the
HPE Solid State Drive QuickSpecs here: (link)
NVMe drives not supported by HPE Smart Array controllers.
NVMe drives require the addition of the High Performance Fan kit (867810-B21).
HPE NVMe x8 Lanes Mixed Use HHHL
Networking
1 Gigabit Ethernet adapters
Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
Quickspecs for 811546-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.1 x4
$349
$249.00
Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00
Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
10 Gigabit Ethernet adapters
Quickspecs for 656596-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 2.0 x8
$175
$125.00
Quickspecs for 652503-B21 - 2 ports - SFP+ -10Gb+ - PCI Express 3.0 x8
$105
$75.00
Quickspecs for 867707-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 3.0 x8
$760
$539.00
Quickspecs for 817738-B21 - 2 ports - RJ-45 - 10 Gb - PCI Express 3.0 x4
$385
$275.00
Quickspecs for 727055-B21 - 2 ports - SFP+ - 10 Gb - PCI Express 3.0 x8
$223
$159.00
Quickspecs for P08446-B21 - 2 ports - SFP+ - 10 Gb - PCI Express 3.0 x8
$690
$485.00
Quickspecs for P11338-B21 - 2 ports - SFP+ - 10 Gb - PCI Express 3.0 x8
$273
$195.00
25 Gigabit Ethernet adapters
Quickspecs for 817718-B21- 2 ports - SFP28 - 25 Gb - PCI Express 3.0 x8
$385
$275.00
Quickspecs for 817753-B21- 2 ports - SFP28 - 25 Gb - PCI Express 3.0 x8
$207
$156.00
Quickspecs for 867328-B21- 2 ports - SFP28 - 25 Gb - PCI Express 3.0 x8
$585
$418.00
100 Gigabit Ethernet adapters
Quickspecs for 874253-B21 - 1 ports - SFP28 - 100 Gb - PCI Express 3.0 x16
NOTE: The DL325 Gen10 ships with 4x 1 Gb Embedded.
NOTE: 4-port adapters go only into Slot 1.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
http://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-12.html
$487
$348.00
FlexibleLOM adapters
NOTE: The DL325 Gen10 chassis ships with 4x 1 Gb embedded.
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
http://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-12.html
$165
$113.00
NOTE: The DL325 Gen10 chassis ships with 4x 1 Gb embedded.
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
NOTE: 622FLR-SFP28, CN1300R & CN1200R adapters with FCoE used in conjunction with all Red Hat 7.x version OS's are not supported at this time. http://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-12.html.
$161
$115.00
InfiniBand
Power Supplies
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to 'right-size' a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid 'trapped' power capacity in the data center.
NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at:
http://www.hpe.com/info/hppoweradvisor.
NOTE: All power supplies in a server should match. Mixing Power Supplies is not supported.
NOTE: Option kits contain the specified power supply and a PDU IEC cable.
NOTE: 1600W power supplies only support high line voltage.
NOTE: HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power Distribution Units (PDUs). Visit HPE power cords for a full list of optional HPE power cords.
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.
NOTE: HPE DL325 Gen10 RPS Enablement Kit (P04983-B21) is mandatory to use this power supply.
$182
$137.00
NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14 power inlet connector.
NOTE: HPE DL325 Gen10 RPS Enablement Kit (P04983-B21) is mandatory to use this power supply.
$321
$229.00
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.
NOTE: HPE DL325 Gen10 RPS Enablement Kit (P04983-B21) is mandatory to use this power supply.
$181
$129.00
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
NOTE: HPE DL325 Gen10 RPS Enablement Kit (P04983-B21) is mandatory to use this power supply.
$459
$328.00
NOTE: Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and include a C-14 power inlet connector that can support HPE Power Discovery Services (blue connector).
NOTE: HPE DL325 Gen10 RPS Enablement Kit (P04983-B21) is mandatory to use this power supply.
$213
$149.00
NOTE: This enablement kit is required to use the Flex Slot power supplies
NOTE: Flex Slot universal power supplies support power efficiency of up to 94% and support both 277VAC/380VDC power inputs.
NOTE: HPE DL325 Gen10 RPS Enablement Kit (P04983-B21) is mandatory to use this power supply.
$284
$197.00
Storage Controllers
NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (P01366-B21), which supports multiple devices and is sold separately.
$145
$109.00
NOTE: Does not occupy a PCIe expansion slot and includes SmartCache license.
NOTE: The P816i-a cable ships in the 8SFF chassis only.
$890
$628.00
NOTE: Does not occupy a PCIe expansion slot.
$598
$409.00
$595
$447.00
Essential RAID Controllers
$333
$250.00
$245
$184.00
NOTE: Does not occupy a PCIe expansion slot.
$790
$528.00
HPE Cable Options
Optional Software
$499
$388.00
NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers and comes standard (no licensing is required) if the HPE Smart Array P816i-a SR Gen10 Controller is installed in the server.
Optional Upgrades
NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers.
$145
$109.00
Storage Options
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Converged Network Adapters
$1,596
$1,158.00
NOTE: For the complete listing of Fibre Channel Converged Network Adapters please see:
https://www.hpe.com/us/en/product-catalog/servers/adapters/pip.models.hpe-storefabric-converged-network-adapters.4118472.html
NOTE: 622FLR-SFP28, CN1300R & CN1200R adapters with FCoE used in conjunction with all Red Hat 7.x version OS's are not supported at this time.
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
