HPE ProLiant DL160 Gen10 Parts
Extend the life and performance of your HPE ProLiant DL160 Gen10 server with our full range of compatible parts and upgrades. Designed for efficiency and scalability in dense environments, the DL160 Gen10 benefits from genuine HPE components tailored for enterprise workloads.
Available DL160 Gen10 Parts:
- Memory: DDR4 ECC Registered RAM options
- Drives: SAS, SATA, and NVMe SSDs & HDDs
- Storage Controllers: Smart Array RAID & HBA adapters
- Networking: High-speed Ethernet cards and NICs
- Power Supplies: Redundant and energy-efficient PSU units
- Processors: Intel Xeon Scalable Gen1 and Gen2 CPUs
Whether you're maintaining existing systems or upgrading, we provide enterprise-grade solutions for the DL160 Gen10.
✅ Looking for a specific DL160 Gen10 part? Browse the subcategories below or reach out for expert support.
Memory
Notes: Maximum memory capacity and speed per processor is dependent on processor model selection or limitation.
Notes: DDR4-2933 Memory Kits are only supported with 2nd Generation Intel Xeon Scalable Series Processors and DDR4-2666 Memory Kits are only supported with 1st Generation Intel Xeon Scalable Series Processors.
HPE DDR4 Memory Registered DIMMs (RDIMMs) for 2nd Generation Intel Xeon Scalable Series
$347
$248.00
$140
$100.00
$137
$98.00
$179
$128.00
Registered DIMMs (RDIMMs) for 1st Generation Intel Xeon Scalable Series
Drives
Hard Disk Drives
Mission Critical (Enterprise) - 12G SAS - SFF Drives
Business Critical (Midline) - 12G SAS - LFF Drives
Business Critical (Midline) - 6G SATA- SFF Drives
Business Critical (Midline) - 6G SATA - LFF Drives
Solid State Drives
Read Intensive - 12G SAS - SFF - Solid State Drives
$1,721
$1,229.00
$1,498
$1,159.00
Mixed Use - 12G SAS - SFF - Solid State Drives
$2,892
$2,066.00
$2,376
$1,697.00
$1,688
$1,185.00
$1,166
$833.00
Mixed Use - 12G SAS - LFF - Solid State Drives
Read Intensive - SATA - SFF - Solid State Drives
$1,544
$1,103.00
Mixed Use - SATA - SFF - Solid State Drives
$1,588
$1,219.00
Read Intensive - SATA - LFF - Solid State Drives
Internal Dual M.2 Kit
Notes: The Universal SATA M.2 Kit above will require a PCIe slot and support up to two of the same M.2 cards below.
Read Intensive - M.2 - Solid State Drives (2280 type)
Storage Controllers
HPE Flexible Smart Array Controllers
$598
$409.00
$790
$528.00
Must also select either 4LFF or 8SFF Smart Array SAS Cable Kit (866452-B21; 866448-B21), depending - on chassis
All performance RAID controllers are supported by the HPE Smart Storage Battery (P01366-B21 ), which supports multiple devices and is sold separately.
Does not occupy a PCIe expansion slot.
HPE Smart Array Controllers
$375
$268.00
$595
$447.00
$245
$184.00
Smart Storage Battery

Notes: Supports up to 3 P-class Smart Array controllers.
$277
$185.00

Notes: Supports up to 6 P-class Smart Array controllers.
$145
$109.00
Networking
25 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters

Can be installed only in Slot 2 and Slot 3
$223
$159.00
1 Gigabit Ethernet adapters

Can be installed only in Slot 1 and Slot 3
$349
$249.00

Can be installed only in Slot 1 and Slot 3
$145
$98.00
FlexibleLOM adapters
The HPE ProLiant DL160 Gen10 chassis ships with 2x 1 Gb embedded.
Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed - from the original configuration after the server is shipped.
FlexibleLOM Riser Kit (875748-B21) is required to install these adapters
HPE InfiniBand
Power Supplies
HPE Flex Slot Power Supplies
$284
$197.00
Storage Options
Emulex Fibre Channel HBAs
$1,545
$1,058.00
QLogic Fibre Channel HBAs
Processors
Field upgrades from 1st generation processors (x1xx) to 2nd generation processors (x2xx) not supported.
Mixing of 2 different processor models is not supported.
When 2nd Generation Intel Xeon Scalable Processor is slected, then only DDR4-2933 Memory Kit can be selected; When 1st Generation Intel Xeon Scalable Processor is selected, then only DDR4-2666 Memory Kit can be selected -