HPE ProLiant DL388 Gen9 Parts
Unique Options

NOTE: The HPE DL380 Gen9 Universal Media bay provides front VGA and 2xUSB 2.0; plus support for 2xSFF front drives (724864-B21) and ODD support (No included); and can only be located in Bay1 in either an 8SFF or 8+8SFF front end.
$168
$122.00

NOTE: This kit includes alternative 2 heatsinks plus 6 cables to enable GPU support. Other limitations apply, see Graphic section for more details.
$253
$182.00
$291
$198.00
NOTE: This kit is also required to support Passive GPUs.

NOTE: For 2SFF front the Universal Media Bay (724865-B21) is required.
$399
$285.00
NOTE: 2SFF in the rear is only supported with a 24SFF (CTO chassis or field upgraded) or 12LFF (719061-B21) front end.
NOTE: Rear drives are not supported with 160W Processors in a 12LFF front end

NOTE: This is only supported in the 12LFF chassis (719061-B21).
$1,250
$950.00
NOTE: 3LFF rear drives will consume the 2nd riser expansion slot.
Slot1: 1x Gen3 x16 FH/FL, 1xGen3 x8 FH/HL
NOTE: This replaces the standard Primary riser in slot1.
Slot2: 2xGen3 x16 FH/FL, 1xGen3 x8 FH/HL

NOTE: To add an additional 8SFF drive cage in Bay1.
$495
$361.00
NOTE: To get to 16SFF total please populate bay 2 with 768857-B21 (from an 8SFF starting point).
NOTE: This ships with 6 High Efficiency Fans.
NOTE: Selecting this option does not allow you to select the Universal Media Bay.

NOTE: To add an additional 8SFF drive cage in Bay 2. This is the optimal solution to upgrade to 16SFF total and allows the flexibility to add the Universal Media Bay (724865-B21) for 2 additional SFF or Optical.
$415
$298.00

NOTE: SAS expander to enable 24SFF field upgrade.
$458
$336.00

NOTE: The Systems Insight Display no longer ships as standard but is available as a Factory Integrated or field upgrade option.
$178
$135.00
Memory
Registered DIMMs (RDIMMs) for E5-2600v3 Series
NOTE: The following memory is supported by the E5-2600v3 series Processors.

NOTE: Depending on Processor selected this memory will run at 1600, 1866 or 2133MHz.
$84
$59.00
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
NOTE: The following memory is supported by the E5-2600v3 series Processors.
$102
$71.00

NOTE: Depending on Processor selected this memory will run at 1600, 1866 or 2133MHz.
$86
$60.00
Optical Media

NOTE: The Universal Media Bay (724865-B21) is required for this option.
$103
$75.00

NOTE: The Universal Media Bay (724865-B21) is required for this option.
$185
$159.00
$385
$275.00
Drives
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
$785
$549.00
$653
$447.00
12G SAS Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$699
$499.00
$638
$437.00
12G SAS Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
12G SAS Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$599
$499.00
$350
$250.00
$186
$135.00
6G SAS Hot Plug Enterprise Mainstream Solid State Drives
$785
$557.00
$622
$457.00
$315
$248.00
$366
$275.00
$244
$181.00
6G SATA Hot Plug SFF Value Endurance (2.5-inch) Enterprise Value G1 Solid State Drives
$457
$313.00
$351
$254.00
6G SATA Hot Plug SFF (2.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
$755
$585.00
$490
$329.00
$380
$266.00
6G SATA Hot Plug LFF Value Endurance (3.5-inch) Converter Enterprise Value G1
Solid State Drives
$387
$287.00
$390
$269.00
6G SATA Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
$1,053
$726.00
$556
$400.00
$557
$384.00
$551
$385.00
$566
$410.00
6G SATA Hot Plug LFF (3.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
Hard Drive Blank Kits
Hard Drive Kits
$495
$361.00
$399
$285.00

NOTE: For a complete list of the drive, Controller and cable options please check the compatibility matrix:
$1,250
$950.00
Media Bay Kits

NOTE: The Universal Media Bay offers front VGA and 2xUSB 2.0, plus ability to add optional Optical drive, and 2SFF.
$168
$122.00
NOTE: This is only compatible with the 8SFF or 8+8 SFF configurations and can only be populated in Bay1.
Networking
1 Gigabit Ethernet adapters


$145
$98.00


$185
$128.00


$84
$59.00
10 Gigabit Ethernet adapters


$105
$75.00


$175
$125.00

NOTE: The DL380 Gen9 chassis ships with 4x1Gb Embedded.
$407
$291.00
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
FlexibleLOM Adapters

NOTE: The DL380 Gen9 chassis ships with 4x1Gb Embedded.
$127
$89.00
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.
InfiniBand
$405
$285.00
I/O Expansion Options

NOTE: This is for slot 1 and supports double wide GPGPUs
$275
$186.00
Slot1: 1x Gen3 x16 FH/FL, 1xGen3 x8 FH/HL.

NOTE: This is for slot 2 and supports double wide GPGPUs
$209
$149.00
Slot2: 2x Gen3 x16 FH/FL, 1xGen3 x8 FH/HL.
NOTE: To support Graphics cards please also order the DL380 Gen9 Graphics Enablement kit, 719082-B21 that ships with 2 Performance Heatsinks and 6 Performance Fans. 1 kit needed for a 2P unit.
Power Supplies
HPE Flex Slot Platinum Hot-plug Power supplies

NOTE: All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/or experience operational issues with your server.
$84
$59.00
NOTE: - The above power supply options are all 80Plus Platinum-certified with an efficiency rating of up to 94%.- Support for HPE Power Discovery Services is included with the 1400W Flex Slot- option.
NOTE: Maximum of 2 Flex Slot PS per platform.
Computation and Graphics Accelerato

NOTE: This GPU enablement kit includes 2 Heatsinks and 6 cables to enable double wide GPUs to be supported.
$253
$182.00
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.
NOTE: There are limitations on the server model and processor supported when adding Graphics accelerators.
NOTE: Passive cards will require the addition of the High Performance Fan Kit (719079-B21).

NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.
NOTE: There are limitations on the server model and processor supported when adding Graphics accelerators.
NOTE: This card will require the addition of the High Performance Fan Kit (719079-B21).

NOTE: This is supported in all models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in slot2 (2nd processor required).
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.

NOTE: This is supported in all models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in slot2 (2nd processor required).
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.
NOTE: This is supported in all models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in slot2 (2nd processor required).
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.

NOTE: This is supported in all models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in slot2 (2nd processor required).
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.
NOTE: This is supported in all models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in slot2 (2nd processor required).
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.
NOTE: This card requires the addition of the Graphics Enablement Kit (719082-B21).

NOTE: This is supported in all models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in slot2 (2nd processor required).
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card.

NOTE: Each DL380 Gen9 server will accommodate up to three single-width or two double width PCIe cards for Computational Graphics support.
$68
$49.00
NOTE: The NVIDIA Tesla, GRID and Quadro modules are supported only on 64-bit versions of Linux and Windows operating systems as well as on Virtual Machine client operating systems. The supported bare metal operating systems are RHEL6, SLES 11 and Windows Server 2012 R2.
NOTE: There are limitations on fan types, setting, and chassis support by card.
NOTE: Mixing of GPUs is not supported.
Cooling Options

NOTE: High Performance Fan kit consists of 6 fans, these will need to replace all the standard Fans in the unit, and fill all 6-Fan cages.
$291
$198.00
NOTE: The 12LFF and 24SFF models (including field upgrades to 24SFF) will already include 6 High Performance Fan kits.
NOTE: The High Performance Fan Kit is needed to support certain Passive GPGPU (Graphics cards) configurations; or ASHRAE operating environments.
Storage Controllers

SAS Controllers
HPE Flexible Smart Array Controllers

NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
$183
$128.00
NOTE: Includes the HPE Smart Storage Battery.
HPE Smart Array Controllers

NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
$156
$109.00
$127
$89.00
HPE Smart Host Bus Adapters

NOTE: Provides support for up to 8 internal SAS/SATA drives without using a PCIe slot.
$109
$82.00
HPE Cable Options

NOTE: 12LFF port 3 to 2SFF or 3LFF to P440/840 PCIe.
$90
$68.00

NOTE: For front mount 2SFF to H240/P440ar, H240 or embedded B140i SATA.
$99
$75.00

NOTE: 8/16/24 SFF to P840/440 bay 3.
$197
$133.00

NOTE: For front/rear mount 2SFF to P440/840 PCIe).
$99
$75.00

NOTE: For 12LFF to P440/840 PCIe cables- ports 1/2/3.
$163
$117.00

NOTE: 8/16/24SFF to 240/440ar, H240 PCIe or embedded B140i SATA.
$191
$138.00

NOTE: For 12LFF ports 1&2 to H240/P440ar, H240 or embedded B140i SATA.
$77
$55.00
NOTE: For details on cabling options, additional information available here: Cabling Matrix.
Optional Upgrades

NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices (up to 16).
$161
$115.00
NOTE: Ships as standard with some HPE Flexible Smart Array Controllers.
Tape Backup
Tape Drives
$3,762
$2,675.00
$4,868
$3,606.00
$627
$451.00
HPE Tape Storage Systems
HPE StoreEver MSL6480
$16,500
$12,500.00
$16,500
$12,500.00
$3,548
$2,886.00
$3,118
$2,293.00
Storage Options
Emulex Fibre Channel HBAs
QLogic Fibre Channel HBAs
Converged Network Adapter
Disk Storage Systems
Disk Enclosures
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Entry Processors - E5-2600v3 series Processors
Base Processors - E5-2600v3 series Processors

NOTE: Ships with a High Performance Heatsink.
$248
$194.00
Performance Processors - E5-2600v3 series Processors

NOTE: Ships with a High Performance Heatsink.
$480
$328.00
$152
$106.00

NOTE: Ships with a High Performance Heatsink.
$455
$356.00

NOTE: Ships with a High Performance Heatsink.
$340
$266.00

NOTE: Ships with a High Performance Heatsink.
$315
$225.00

NOTE: Ships with a High Performance Heatsink.
$1,021
$729.00

NOTE: Ships with a High Performance Heatsink.
$271
$212.00

NOTE: Ships with a High Performance Heatsink.
$455
$356.00

NOTE: Ships with a High Performance Heatsink.
$349
$249.00

NOTE: Ships with a High Performance Heatsink.
$317
$248.00

NOTE: Ships with a High Performance Heatsink.
$568
$395.00

NOTE: 2SFF rear drives are not supported with this processor in a 12LFF model
$273
$195.00
NOTE: Up to 2 processors supported. Performance and Energy Star Model configurations include two processors.
NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology.
NOTE: Turbo2: Intel Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than then previous generation turbo technology.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: The xxxxxx-B21 is the 2nd processor and ships with 2 additional FANs for factory of field installation.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High Performance Heatsink. For Processors requiring double wide GPU support please order the GPU enablement kit (719082-B21).