HPE ProLiant DL160 Gen9 Parts
Unique Options

NOTE: CPU 2 is required if this riser is to be installed, enables one PCIe3 slot.
$210
$153.00

NOTE: This kit is required to enable a front USB3.0 port on SFF models only.
$199
$143.00

NOTE: This riser kit is required when flexibleLOM is selected.
Memory
Memory for E5-2600v4 Series
Registered DIMMs (RDIMMs) for E5-2600v4 Series
$104
$73.00

NOTE: Depending on Processor selected this memory will run at 1866, 2133 or 2400MHz.
NOTE: Mixing of DIMM types is not supported.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.
$91
$65.00
Load Reduced DIMMs (LRDIMMs) for E5-2600v4 Series
Memory for E5-2600v3 Series
Registered DIMMs (RDIMMs) for E5-2600v3 Series
NOTE: These Memory DIMMs are supported only on E5-2600v3 processors.
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
$102
$71.00
Optical Media
Drives
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
$785
$549.00
$653
$447.00
12G SAS Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$699
$499.00
$638
$437.00
12G SAS Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
$1,189
$849.00
$875
$625.00
12G SAS Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$599
$499.00
$350
$250.00
$186
$135.00
6G SATA Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
$622
$457.00
$315
$248.00
$366
$275.00
$244
$181.00
$396
$275.00
$785
$557.00
6G SATA Hot Plug SFF Value Endurance (2.5-inch) Enterprise Value G1 Solid State Drives
$457
$313.00
$351
$254.00
6G SATA Hot Plug SFF (2.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
$755
$585.00
$490
$329.00
$380
$266.00
6G SATA Hot Plug LFF Value Endurance (3.5-inch) Converter Enterprise Value G1
Solid State Drives
$387
$287.00
$390
$269.00
6G SATA Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
$556
$400.00
$557
$384.00
$551
$385.00
$566
$410.00
6G SATA Hot Plug LFF (3.5-inch) Enterprise Light G1 Solid State Drives
6G SATA Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
Hard Drive Blank Kits
Networking
1 Gigabit Ethernet adapters


$185
$128.00


$145
$98.00


$84
$59.00


$349
$249.00
10 Gigabit Ethernet adapters


$105
$75.00


$175
$125.00


$223
$159.00
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. See cables/options below.
FlexibleLOM Adapters

NOTE: FlexibleLOM riser kit (P/N: 781844-B21) is required when any flexibleLOM is selected.
$91
$65.00
InfiniBand
I/O Expansion Options

NOTE: CPU 2 is required if this riser is to be installed, enables one PCIe3 slot.
$210
$153.00

NOTE: This enablement kit is required when flexibleLOM is selected.
Power Supplies
HPE Entry-Level Power Supplies

NOTE: Backplane kit is required when 800W/ 900W power supply is selected.
$137
$109.00
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message and/or experience operational issues with your server.
Cooling Options

NOTE: This kit includes one fan and is required for enabling fan redundancy with 1P and 2P configurations.
$134
$95.00
Storage Controllers

HPE Smart Array SAS Controllers
HPE Smart Host Bus Adapters
HPE Cable Options

NOTE: One of the above cables is required to be selected depending on the combination of chassis and storage controller. Cable option kit descriptions include the right chassis and storage controller names.
NOTE: NHPE CTO Server includes SATA cables required to connect drives to embedded B140i SATA controller.
Optional Upgrades

NOTE: This option is mandatorily required with HPE Smart Array controllers. One server can accommodate only 1 Smart Storage Battery that would suffice the requirement of all HPE Smart Array controllers.
$161
$115.00
Tape Backup
NOTE: For Internal drives to be connected to DL servers please make sure that you order rack mount kit as well.
Tape Drives
SAS Rack-Mount Tape Solutions
$4,868
$3,606.00
$627
$451.00
HPE DAT Autoloader
$3,762
$2,675.00
HPE MSL2024 Tape Library
$3,548
$2,886.00
HPE MSL4048 Tape Library
$3,118
$2,293.00
HPE StoreEver MSL6480
$16,500
$12,500.00
$16,500
$12,500.00
Disk Storage Systems
Disk Enclosures
USB and SD Options

NOTE: This enablement kit is required to enable front 1xUSB3.0 port with 8SFF models.
$199
$143.00
Rack Options
Rail Kits
HPE Rack Mount Consoles

NOTE: Please see the HPE Rack Console QuickSpecs for information on additional options and product specifications.
HPE KVM Switches
$373
$298.00

NOTE: To learn more, please visit the HPE KVM Switches web page.
HPE USB Keyboard and Mouse

NOTE: Please see the HPE USB Keyboard and Mouse QuickSpecs for information on additional options and product specifications.
$144
$98.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc