HPE ProLiant BL460c Gen10 Parts
Keep your HPE ProLiant BL460c Gen10 blade server performing at its best with our wide selection of compatible parts and upgrades. Engineered for high-density compute environments, the BL460c Gen10 delivers impressive performance in a compact form factor within HPE BladeSystem c7000 or HPE Synergy enclosures.
Available BL460c Gen10 Parts:
- Memory: DDR4 ECC Registered RDIMM and LRDIMM
- Drives: SAS, SATA, and optional NVMe SSDs
- Storage Controllers: Smart Array RAID and HBA adapters
- Networking: Mezzanine Ethernet adapters
- Power Supplies: Blade enclosure-managed power components
- Processors: Intel Xeon Scalable Gen1 & Gen2 CPUs
✅ Looking for a specific BL460c Gen10 part? Browse the subcategories below or contact us for help sourcing the exact component you need.
Networking
Notes:
- A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when connected to an interconnect module with 10Gb Ethernet downlinks.
- A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to an interconnect module with 1Gb Ethernet downlinks.
- The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb interconnect in bays 3-6 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
20 Gigabit Ethernet Mezzanine Cards
10 Gigabit Ethernet Mezzanine Cards
FlexibleLOM Adapters
Notes: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM connectors and is already included in the pre-configured models. However, it must be added in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used to change these original FlexibleLOMs.
20Gb FlexibleLOM Adapters
Notes:- Please see QuickSpecs for technical specifications and additional information at- (link)
$87
$61.00
Notes:- Please see QuickSpecs for technical specifications and additional information at- (link)
$84
$59.00
Notes:- Please see QuickSpecs for technical specifications and additional information at- (link)
$122
$85.00
HPE Infiniband Mezzanine Adapters
Notes:
- When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in mezzanine slot 2, both ports are active.
- The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and may be installed in either mezzanine slot if operated in any other mode.
$189
$129.00
10Gb FlexibleLOM Adapters
Notes:- Please see QuickSpecs for technical specifications and additional information at- (link)
$95
$68.00
HPE Fibre Channel
Memory
Registered DIMMs (RDIMMs) for 2nd Generation Intel Xeon Scalable Series
$187
$125.00
$179
$128.00
$137
$98.00
$140
$100.00
$347
$248.00
$291
$208.00
$863
$675.00
Notes:
- HPE memory from previous generation servers/PROCESSORS(Gen1) is not supported with this server/processor combination. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen10.
- LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
- 128GB DIMMs cannot be mixed with other DIMM capacities within the server
-- Depending on the memory configuration and processor model, the memory speed may run at 2933 Mt/s, 2666MT/s, 2400MT/s, or 2133MT/s.
Registered DIMMs (RDIMMs) for 1st Generation Intel Xeon Scalable Series
$81
$58.00
$111
$79.00
$125
$89.00
$105
$75.00
$193
$138.00
$1,330
$950.00
Notes:
- HPE memory from previous generation servers is not supported with this server. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen10.
- LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
- 128GB DIMMs cannot be mixed with other DIMM capacities within the server
-- Depending on the memory configuration and processor model, the memory speed may run at 2666MT/s, 2400MT/s, or 2133MT/s.
Drives
12G SAS Enterprise/Midline SFF (2.5-inch) SC HDD
$196
$147.00
$325
$249.00
$475
$358.00
$522
$348.00
SATA 6G Midline (2.5-inch) Hard Drives
$347
$248.00
Notes:
- The ProLiant BL460c Gen10 server includes the HPE hot-plug small form factor (SFF) SmartDrive carrier for enhanced management and reduced maintenance errors. HPE drives from generation G7 servers and before are not compatible with the BL460c Gen10 drive bays.
- The mixing of standard SAS drives with SAS SSD is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported.
- HPE hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
- The hard drive options are not required when configuring a drive-less model.
HPE Solid State M.2 SATA Drives
HPE Solid State M.2 drives for installation internal to server blade
Notes:
- The solid state M.2 drives require the selection of HPE BL460c Gen10 M.2 FIO Enablement Kit (873870-B21).
- M.2 drives cannot be mixed with other sizes and capacities within the system.
- RAID 1, 0, and 5 are provided through the S100i in UEFI BIOS mode only.
$499
$399.00
HPE Solid State M.2 HDD for installation internal to server blade
HPE uFF (2.5-inch) Solid State Drives
HPE NVMe PCIe Read Intensive SFF (2.5-inch) Solid State Drives
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$1,456
$1,025.00
$1,083
$768.00
$2,542
$1,829.00
$4,949
$3,437.00
$11,360
$7,585.00
$3,625
$2,608.00
$1,189
$849.00
$683
$488.00
$945
$661.00
$819
$598.00
$927
$755.00
$855
$598.00
$2,207
$1,554.00
$5,529
$3,921.00
$998
$718.00
$2,573
$1,878.00
$12,799
$9,999.00
$1,105
$762.00
$1,996
$1,468.00
$1,498
$1,119.00
$12,449
$9,021.00
$1,484
$1,045.00
HPE NVMe PCIe Mixed Use SFF (2.5-inch) Solid State Drives
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$557
$398.00
$1,280
$889.00
$3,500
$2,488.00
$769
$549.00
$2,352
$1,782.00
$1,057
$739.00
$7,906
$5,378.00
$769
$549.00
$2,352
$1,782.00
$1,057
$739.00
$7,906
$5,378.00
$1,361
$1,008.00
$4,424
$3,183.00
$1,228
$859.00
$1,842
$1,279.00
$3,200
$2,162.00
$5,921
$4,028.00
$11,409
$8,451.00
HPE NVMe PCIe Write Intensive SFF (2.5-inch) Solid State Drives
SATA 6G Read Intensive Hot Plug SmartDrive SFF (2.5-inch) SSD Drives
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$391
$266.00
$567
$405.00
$865
$618.00
$1,500
$1,049.00
$1,872
$1,337.00
$1,529
$1,047.00
$1,582
$1,130.00
$1,452
$1,052.00
SATA Mixed Use SFF (2.5-inch) SC SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$329
$235.00
$448
$320.00
$767
$548.00
$531
$371.00
$462
$337.00
$1,229
$842.00
$1,457
$1,041.00
$517
$372.00
$500
$340.00
$923
$664.00
$1,361
$986.00
$1,506
$1,076.00
SAS Read Intensive SFF (2.5-inch) SC SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$726
$530.00
$1,023
$701.00
$1,778
$1,252.00
$2,913
$2,158.00
$2,868
$2,034.00
$2,754
$1,967.00
$1,659
$1,202.00
$4,570
$3,264.00
$1,733
$1,238.00
$2,325
$1,661.00
$2,981
$2,129.00
$1,040
$743.00
$1,733
$1,238.00
$1,721
$1,229.00
$2,867
$2,108.00
SAS 12G Mixed Use SFF (2.5-inch) SC SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$662
$473.00
$833
$626.00
$998
$829.00
$2,360
$1,662.00
$1,845
$1,387.00
$1,136
$806.00
$2,180
$1,775.00
$536
$383.00
$839
$599.00
$1,368
$977.00
$2,388
$1,725.00
$498
$356.00
$839
$599.00
$1,799
$1,285.00
$3,614
$2,442.00
12G SAS Write Intensive SFF (2.5-inch) SC SSD
Related Blog Post:HPE Solid State Drives: Write Intensive (WI) vs. Mixed Use (MU) vs. Read Intensive (RI)
$316
$226.00
$1,050
$745.00
$752
$533.00
$1,050
$775.00
$987
$700.00
$1,685
$1,148.00
$235
$168.00
$161
$115.00
Notes: The mixing of standard SAS drives with SAS SSD is supported within the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported
6G SATA Multi Vendor SSD
$1,872
$1,337.00
$1,588
$1,219.00
Storage Controllers
$363
$250.00
$675
$462.00
$695
$599.00
Notes:
- The HPE Gen10 NVMe FIO Setting (873373-B21) is required to support SFF NVMe SSDs within the system. This option is not compatible with the HPE Smart Array P204i-b,. Hewlett Packard Enterprise recommends the use of a dual M.2 solid state drive kit for boot when using this option.
- The HPE Smart Array S100i SR Controller (chipset SATA) comes standard with the HPE BL460c Gen10 10Gb/20Gb FLB CTO Blade. If the HPE Smart Array P204i-b controllers is not chosen, a SATA cable will be provided to support SATA devices for the two internal drive bays. If RAID is required when using the S100i, please choose ‘HPE FIO Enable Smart Array S100i SR Setting’ (784308-B21).
InfiniBand Mezzanine Adapters
Notes:
- InfiniBand FDR is the only speed supported on the HPE BL460c Gen10. For additional information, please see the HPE BladeSystem c7000 Enclosure and InfiniBand QuickSpecs at:
- (link)
- (link)
- The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and may be installed in any mezzanine slot if operated in any other mode.
- When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in any other mezzanine slot, both ports are active.
$189
$129.00
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Intel Scalable Family Processors Generation 2 (x2xx Models)
Notes:
-All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1) processor.
-If two processors are desired, select one xxxxxx-L21 here in Step 2 and the corresponding xxxxxx-B21 for the same processer model in Step 4.
Intel Xeon-Platinum Processors
Intel Xeon-Gold Processors
$6,872
$5,378.00
$5,313
$3,795.00
$5,733
$4,095.00
$5,173
$3,695.00
$2,950
$2,350.00
$3,605
$2,575.00
$5,033
$3,595.00
$3,031
$2,372.00
$3,491
$2,732.00
$3,395
$2,425.00
$1,950
$1,526.00
$4,250
$3,326.00
$2,537
$1,985.00
$1,973
$1,544.00
$1,973
$1,544.00
$2,594
$2,030.00
Intel Xeon-Silver Processors
$1,605
$1,256.00
$1,352
$1,058.00
$1,134
$887.00
$1,479
$1,157.00
$846
$662.00
Intel Xeon-Bronze Processor
$490
$383.00
Notes:
-DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
-Supports 1or 2 processors. Mixing of different processor models or generations is not supported.
-The Intel Xeon Scalable Family Processors come with model numbers to indicate SKU level, processor generation, SKU model, integrations-optimizations or memory capacity. ( ie. HPE BL460c Gen10 Gen10 Intel Xeon-Gold 4214Y; 4 is the SKU Level, 2 is the processor generation, 14 is the SKU model, Y indicates Speed Select SKU)
-Platinum 8200 Series Supports 2 socket (BL460c Gen10) compute module, 2 Socket supports 2UPI @ 10.4 GT/s, 6-Channel DDR4 @ 2933 MT/s supporting up to 1TB memory capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology supported. Intel AVX-512 (2x 512-bit FMA), VNNI, 48 lanes PCIe 3.0, Node Controller Support, Advanced RAS supported.
-Gold 6200 Series - Supports 2 socket (BL460c Gen10) compute module, 2 Socket supports 2UPI @ 10.4 GT/s, 6-Channel DDR4 @ 2933 supporting up to 1TB memory capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512 (2x 512-bit FMA), VNNI, 48 lanes PCIe 3.0, Node Controller Support, Advanced RAS supported.
-Gold 5200 Series - Supports 2 socket (BL460c Gen10) compute module, 2 Socket supports 2UPI @ 10.4 GT/s, 6-Channel DDR4 @ 2666MHz(SKU 5222=supports 2933),supporting up to 1TB memory capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA) (SKU 5222 supports 2x 512 bit FMA), VNNI, 48 lanes PCIe 3.0, Advanced RAS supported.
-Silver 4200 Series - Supports 2 socket (BL460c Gen10) compute module, 2 Socket supports 2UPI @ 9.6 GT/s, 6-Channel DDR4 @ 2666 MHz supporting up to 1TB memory capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA), VNNI, 48 lanes PCIe 3.0, standard RAS supported.
-Bronze 3200 Series - Supports 2 socket (BL460c Gen10) compute module, 2 Socket supports 2UPI @ 9.6 GT/s, 6-Channel DDR4 @ 2133MHz supporting up to 1TB memory capacity. Intel AVX-512(1x 512-bit FMA), VNNI, 48 lanes PCIe 3.0, standard RAS supported.
-The BL460c Gen10 includes two I/O mezzanine expansion slots. A processor must be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
Intel Scalable Family Processors Generation 1
Intel Xeon-Platinum Processors
$3,273
$2,561.00
$6,159
$4,820.00
Intel Xeon-Platinum Processors
Intel Xeon-Gold Processors
$547
$428.00
$651
$509.00
$1,628
$1,274.00
$513
$401.00
$375
$293.00
$559
$437.00
$651
$509.00
$524
$410.00
$800
$626.00
$559
$437.00
$478
$374.00
$570
$446.00
$570
$446.00
$478
$374.00
Intel Xeon-Silver Processors
$754
$590.00
$467
$365.00
$455
$356.00
Intel Xeon-Bronze Processor
$409
$320.00
Notes:
-When using processors of 135W or greater, 10 fans are required in the c7000 for optimal performance.
-DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
-Supports 1or 2 processors. Mixing different processor models is not supported.
-For the Intel C621 Chipset Scalable Family Processors come with model numbers to indicate SKU level, processor generation, SKU model, integrations-optimizations or memory capacity. ( ie. HPE BL460c Gen10 Gen10 Intel Xeon-Gold 6134M; 6 is the SKU Level, 1 is the processor generation, 34 is the SKU model, m indicates memory sku)
-The letter M following the model number indicates higher maximum memory support up to 1.5TB per processor.
-Platinum 8100 Series - 2S - 2UPI @ 10.4 GT/s, 6-Channel DDR4 @ 2666 MT/s, 768 GB memory capacity (1.5 TB on select skus), Intel Turbo Boost Technology, Intel Hyper-Threading Technology
-Intel AVX-512 (2x 512-bit FMA), 48 lanes PCIe 3.0, advanced RAS.
-Gold 5100, 6100 Series - 2S - 2UPI @ 10.4 GT/s, 6-Channel DDR4 @ 2400 MHz (SKU 5122=supports 2666), 768 GB memory capacity (1.5 TB on select skus), Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA) (SKU 5122 supports 2x 512 bit FMA), 48 lanes PCIe 3.0, advanced RAS.
-Silver 4100 Series - 2S - 2UPI @ 9.6 GT/s, 6-Channel DDR4 @ 2400 MHz, 768 GB memory capacity, Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS.
-The BL460c Gen10 includes two I/O mezzanine expansion slots. A processor must be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
