HPE ProLiant SL230s Gen8 Parts
Unique Options
Memory
NOTE: RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM.
Registered DIMMs (RDIMMs)
$52
$39.00
$55
$39.00
$98
$75.00
$75
$55.00
$60
$44.00
$69
$49.00
Unbuffered with ECC DIMMs (UDIMMs)
$98
$68.00
$101
$68.00
$91
$65.00
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
$165
$118.00
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
NOTE: Memory Min and Max depends on number of processors and type of memory:
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The non-hot plug hard drives use a quick release carrier.
SAS Hot Plug with Smart Drive SFF (2.5-inch) Enterprise Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives 
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
SAS Hot Plug Smart Drive SFF (2.5-inch) Midline Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline 512e Drives
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
6G SATA Hot Plug with Smart Drive SFF (2.5-inch) Midline (MDL) Drives
6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
6G SATA Quick Release LFF (3.5-inch) Midline (MDL) Drives
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$1,133
$776.00
$426
$304.00
6G SAS MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$2,365
$1,598.00
$1,318
$955.00
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$444
$302.00
$464
$329.00
3G SATA MLC Quick Release SFF (2.5-inch) Enterprise Mainstream Solid State Drives
$599
$428.00
$621
$438.00
$354
$255.00
NOTE: The hard drive options are not required when configuring a drive-less model.
Drive Cage Kits
NOTE: The Front Hot Plug cage kit, enables two hot plug drives to be implemented in the front bezel. Drives can be implemented individually in order to support a FlexibleLOM or riser card option in the opposite slot.
$170
$122.00
NOTE: The LFF kit enables two (2) 3.5" QR drives.
$95
$70.00
NOTE: The SFF kit enables up to four (4) 2.5" QR drives.
$157
$110.00
Networking
Gigabit Ethernet Adapters
Quickspecs for 647594-B21 - 4 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$145
$98.00
Quickspecs for 652497-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x4
$185
$128.00
Quickspecs for 615732-B21 - 2 ports - RJ-45 - 10/100/1000 - PCI Express 2.0 x1
$84
$59.00
10 Gigabit Ethernet adapters
NOTE: The SL230s Gen8 supports only the low-profile version of the 10GbE Ethernet Adapters.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Quickspecs for 652503-B21 - 2 ports - SFP+ -10Gb+ - PCI Express 3.0 x8
$105
$75.00
FlexibleLOM Adapters
InfiniBand
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
$76
$59.00
NOTE: Dual port ConnectX-3 QDR IB or 10GbE. No IB Enablement Kit required.
$70
$49.00
NOTE: Dual port ConnectX-3 FDR/QDR IB or 40/10GbE. No IB Enablement Kit required.
$128
$95.00
Storage Controllers
SAS Controllers
Smart Array P222 Controller
Smart Array P421 Controller
Optional Upgrades
$112
$76.00
NOTE: Due to cabling requirements, the HPE 12in Super Cap is a required option to implement a HPE Smart Array Controller with Flash.
Host Bus Adapter
$388
$266.00
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Entry Processors
NOTE: All support up to 1066MHz memory speeds.
Base Processors
NOTE: All support up to1333MHz DDR3 memory speeds.
Performance Processors
NOTE: All support up to 1600MHz DDR3 memory speeds.
NOTE: For 130W CPU support and configuration, please contact your HPE account team.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
$278
$216.00
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
