HPE ProLiant SL165z G7 Parts
Unique Options
¥13,961
¥11,083
¥31,809
¥27,059
¥18,423
¥16,552

NOTE: This is needed to help with cooling if a tray is removed from the z6000.

NOTE: This is needed when using Fiber cables.

NOTE: This is needed to mount the 1U blanking panel back with server when the server is recessed mounted.

NOTE: This is required when adding SAS hard drives using the P212 controller.

NOTE: This is required when adding SAS hard drives using the P410 controller.
¥15,545

NOTE: This is required when adding BBWC.

NOTE: This is required when adding SFF (2.5") SSD or hard drives.
¥22,309
Memory
Registered DIMMs (RDIMMs)
¥9,499
¥7,053
¥11,658
¥8,060
¥13,673
¥11,083
¥13,530
¥10,939
¥14,393
¥10,795
Unbuffered with ECC DIMMs (UDIMMs)
¥11,946
¥9,643
¥34,975
¥31,521
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFF drives.
NOTE: When Adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HPE P212 SAS 4HDD Cable Kit 574001-B21 or HPE P410 SAS 4HDD Cable Kit 583997-B21.
SAS Enterprise (ENT) Drives - with quick-release (QR) carrier
¥36,558
¥21,446
¥13,242
¥10,507
¥11,371
¥7,916
SATA Entry (ETY) Drives - with quick-release (QR) carrier
¥12,378
¥9,787
SATA Midline (MDL) Drives - with quick-release (QR) carrier
¥15,257
¥12,090
¥14,537
¥11,514
¥14,537
¥11,514
¥14,537
¥11,514
¥27,059
¥20,870
SATA Midline (MDL) Solid State Drives - with quick-release (QR) carrier
¥22,885
¥18,423
¥23,893
¥19,287
Networking
Gigabit Ethernet Adapters
¥11,658
¥8,492
¥23,749
¥17,991
¥23,173
¥16,552
¥10,363
¥7,916
¥15,976
¥11,371
10 Gigabit Ethernet Adapters

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
¥13,242
¥10,795

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC550SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
¥14,969
¥10,795
Infiniband Options
¥13,242
¥9,212
¥48,649
¥39,581
Power Supplies
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
¥13,242
¥7,772
¥11,946
¥8,492
¥26,483
¥19,862
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HPE P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HPE P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
¥17,416
¥10,219
¥28,930
¥21,446
¥26,627
¥21,302
¥36,702
¥26,627
Smart Array P411 Controller
¥49,800
¥29,218
¥71,966
¥48,217
¥75,132
¥57,428
Optional Upgrades
NOTE: HPE z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)

NOTE: Supported on HPE Smart Array P212 Controller only.
¥5,901
¥4,174

NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
¥24,900
¥18,567

NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
¥38,286
¥22,453
¥9,643
¥6,909
¥7,628
¥5,613
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc