HPE ProLiant SL165z G7 Parts
Unique Options
$97
$77.00
$221
$188.00
$128
$115.00

NOTE: This is needed to help with cooling if a tray is removed from the z6000.

NOTE: This is needed when using Fiber cables.

NOTE: This is needed to mount the 1U blanking panel back with server when the server is recessed mounted.

NOTE: This is required when adding SAS hard drives using the P212 controller.

NOTE: This is required when adding SAS hard drives using the P410 controller.
$108

NOTE: This is required when adding BBWC.

NOTE: This is required when adding SFF (2.5") SSD or hard drives.
$155
Memory
Registered DIMMs (RDIMMs)
$66
$49.00
$81
$56.00
$95
$77.00
$94
$76.00
$100
$75.00
Unbuffered with ECC DIMMs (UDIMMs)
$83
$67.00
$243
$219.00
NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFF drives.
NOTE: When Adding SAS one of the following cable kits needs to be ordered depending on which SAS controller installing - HPE P212 SAS 4HDD Cable Kit 574001-B21 or HPE P410 SAS 4HDD Cable Kit 583997-B21.
SAS Enterprise (ENT) Drives - with quick-release (QR) carrier
$215
$149.00
SATA Entry (ETY) Drives - with quick-release (QR) carrier
SATA Midline (MDL) Drives - with quick-release (QR) carrier
$106
$84.00
$101
$80.00
$101
$80.00
$101
$80.00
$188
$145.00
SATA Midline (MDL) Solid State Drives - with quick-release (QR) carrier
$159
$128.00
$166
$134.00
Networking
Gigabit Ethernet Adapters
$81
$59.00
$165
$125.00
$161
$115.00
$72
$55.00
$111
$79.00
10 Gigabit Ethernet Adapters

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$92
$75.00

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC550SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$104
$75.00
Infiniband Options
Power Supplies
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
$75
$54.00
$83
$59.00
$184
$138.00
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HPE P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller (574001-B21)
Smart Array P410 Controller
NOTE: HPE P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller (583997-B21)
$201
$149.00
$185
$148.00
$255
$185.00
Smart Array P411 Controller
$500
$335.00
$522
$399.00
Optional Upgrades
NOTE: HPE z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)

NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00

NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
$173
$129.00

NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
$207
$156.00
$67
$48.00
$53
$39.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc