HPE ProLiant DL360 G5 Parts
Memory
$344
$259.00
NOTE: Memory Option Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, please visit:
Smart Buy Memory (DIMMs)
Diskette Drive
$68
$50.00
Optical Media
$194
$175.00
$64
$47.00
Drives

The HPE ProLiant DL360 G5 (Generation 5) server can support up to eight (8) 2.5" SFF (small form factor) hot plug hard drives.
You can use either SAS or SATA drives in the DL360 G5. Most customers opt for Enterprise SAS drives due to the superior performance - faster data transfer rates and spindle speeds. See the full list of available drives below. Feel free to contact us via Live Chat with with questions about hard drives for DL360G5 servers.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$144
$98.00
$83
$58.00
$288
$220.00
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
$270
$199.00
$97
$75.00
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
Networking
Gigabit Ethernet Adapters

NOTE: Supported on a full length-full height slot only.
$56
$45.00
10 Gigabit Ethernet Adapters

NOTE: A minimum of two gigabyte (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
$92
$75.00
Power Supplies
Storage Controllers
SAS Controllers
Smart Array E500 Controller
$392
$288.00
HPE Smart Array P400 Controller
HPE Smart Array P400i Controller
$70
$53.00
$68
$50.00
Smart Array P600 Controller

NOTE: Requires DL360 G5 PCI-X conversion kit (PN 405154-B21).
$122
$108.00
Smart Array P800 Controller
Optional Upgrades

NOTE: Supports Smart Array E200i Controller only.
$91
$67.00

NOTE: For Smart Array P400 Controller and Smart Array P400i Controller only.
$157
$118.00

NOTE: For Smart Array P400 Controller and Smart Array P400i Controller only.
$166
$129.00

NOTE: This 512-MB Battery-Backed Cache Module upgrade kit supports the Smart Array P600 Controller and the Smart Array 6400 series Controller.
$599
$450.00
SAS HBA

NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$140
$95.00

NOTE: Supports SAS and SATA disk drive. RAID 0,1 supported. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$75
$59.00
SAS Cables

NOTE: Used to connect Smart Array P400i Controller to DL360 G5 5th and 6th drive bays.
$48
$38.00

NOTE: Used to connect SA-P600, SA-P400, SA-E200 Controllers to the HPE ProLiant DL360 G5 drive backplane. This kit supports all six drive bays.
$495
$395.00
SCSI Controllers for External Drive/Storage Support

NOTE: For support of external drives only.
$204
$148.00

NOTE: For support of external drives only.
$407
$295.00

NOTE: For support of external drives only.
$199
$188.00

NOTE: This 128-MB Battery-Backed Cache Module upgrade kit supports the Smart Array 642 Controller.
$88
$65.00

NOTE: This 512-MB Battery-Backed Cache Module upgrade kit supports the Smart Array P600 Controller and the Smart Array 6400 series Controller.
$599
$450.00
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00
Quickspecs
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc