HPE ProLiant DL385 G7 Parts

HPE ProLiant DL385 G7 Parts

HPE ProLiant DL385 G7 Parts

Unique Options

HPE StorageWorks RDX320 Internal Removable Disk Backup System for DL Servers thumb
NOTE: 320GB of disk capacity per data cartridge.
NOTE: Mounts in DL385 G7 second drive cage slot (320GB of Disk Storage)
$777
$699.00
HPE StorageWorks RDX500 Internal Removable Disk Backup System for DL Servers thumb
NOTE: 500GB of disk capacity per data cartridge.
NOTE: Mounts in DL385 G7 second drive cage slot (500GB of Disk Storage)
$888
$799.00
HPE StorageWorks RDX750 Internal Removable Disk Backup System for DL Servers thumb
NOTE: 750GB of disk capacity per data cartridge.
NOTE: Mounts in DL385 G7 second drive cage slot (750GB of Disk Storage)

Memory

NOTE: DIMM banks are active only when the corresponding processor socket is populated.
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:

Registered DIMMs (RDIMMs)

Unbuffered with ECC DIMMs (UDIMMs)

Optical Media

Drives

NOTE: This server model can be configured to use either 2.5 inch Small Form Factor (SFF) drives OR 3.5 inch Large Form Factor drives. Please be sure to verify which type your machine is configured to use before placing an order. If you are unsure about which type you need, please visit the section #1 – Does my machine use 2.5 inch SFF or 3.5 inch LFF drives? in our blog post here for help making this decision.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives

12G 15K Drives

12G 10K Drives

6G 15K Drives

6G 10K Drives

3G 15K Drives

3G 10K Drives

SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives

SAS Hot Plug 2.5" SFF Midline (MDL) Drives

SAS Hot Plug 3.5" Midline (MDL) Drives

SATA Hot Plug 2.5" SFF Midline (MDL) Drives

SATA Hot Plug 3.5" Midline (MDL) Drives

SATA Hot Plug 2.5" SFF Entry (ETY) Drives

SATA Hot Plug 3.5" Entry (ETY) Drives

SATA Hot Plug 2.5" Midline (MDL) Solid State Drives

SATA Hot Plug 3.5" Midline (MDL) Solid State Drives

I/O Expansion Options

NOTE: This riser card will support Qty 2 of 10Gbe NICs or can be used for 2 additional PCIe Gen2 cards.
NOTE: The shared network port is only supported in the secondary riser connection.

Storage Controllers

SAS Controllers

Optional Upgrades

256 MB Cache Module thumb
NOTE: Supported on HPE Smart Array P212 Controller and HPE Smart Array P410/Zero Memory Controller only.
$41
$29.00
Battery Kit upgrade thumb
NOTE: To enable BBWC on the 256MB cache.
$207
$156.00

SAS Controller Options

SAS HBA

HPE SC08e 6Gb 2-ports Ext PCIe SAS HBA thumb
NOTE: This is a 2 x4 External Port HBA
NOTE: This is only approved for the HPE StorageWorks P2000 G3 SAS Modular Smart Array.
$157
$109.00

SCSI HBA

HPE SC11Xe Host Bus Adapter thumb
NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00

Processors

NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit.
NOTE: All CPU Kits come complete with heatsink, fan(s), etc

Twelve-Core Processors

Eight-Core Processors

Compare Selected