HPE ProLiant BL620c G7 Parts
Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
$81
$60.00
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a 1GbE interconnect.
NOTE: HPE recommends 10Gb adapters be installed in a x8 PCIe slot for optimal performance.
NOTE: The Flex-10 capability requires the use of an HPE Virtual Connect Flex-10 10Gb Ethernet module or HPE 10GbE Pass-Thru Module.
$92
$64.00
Fibre Channel Mezzanine Options
4Gb Fibre Channel mezzanine adapters
8Gb Fibre Channel mezzanine adapters
Memory
NOTE: All DDR3 memory option kits consist of one DIMM per kit.
$49
$38.00
$54
$38.00
$56
$39.00
$56
$39.00
$67
$48.00
$67
$48.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Different hard drives types may be mixed, but logical drive partitioning (i.e. RAID capability) is not supported.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives 
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$144
$98.00
$83
$58.00
$288
$220.00
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
Storage Controllers
NOTE: The P410i is configured with no cache allowing the end user to select what cache option of the three different options they desire (if cache is desired in the first place). This defines the standard configuration to RAID 0 and 1. However, several cache options are available to add RAID 1+0, 5, and 6 listed below.
NOTE: The server supports up to a combined total of four (4) cache BBWC and/or FBWC options for the P410i and/or optional P700m mezzanine cards.
HPE Smart Array P700m Controller
NOTE: The P700m 512MB cache option adds RAID 1+0, 5, and 6 capability.
$92
$74.00
Optional Upgrades
NOTE: This is an option for the HPE Smart Array P410i Controller (P410i is standard integrated controller).
$173
$129.00
NOTE: This is an option for the HPE Smart Array P410i Controller (P410i is standard integrated controller).
$67
$48.00
NOTE: This is an option for the HPE Smart Array P410i Controller (P410i is standard integrated controller).
NOTE: All the P410i BBWC or FBWC options add RAID 1+0 and 5.
$53
$39.00
NOTE: Supports the HPE Smart Array P700m Controller.
$86
$68.00
(Smart Array P700m Controller)
I/O Expansion Options
HP c-Class Mezzanines
HPE InfiniBand Mezzanine Options
NOTE: The HPE PCI Express Mezzanine Pass-Thru Card is required to support the HPE Ultrium Tape Blades and the PCI Expansion Blade. Up to two Ultrium Tape and/or PCI Expansion Blades are supported per server mix and match.
NOTE: The HPE PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2 and/or 3.
$84
$68.00
Ultrium Tape Blades
$3,987
$3,588.00
$2,772
$2,495.00
$6,099
$5,489.00
NOTE: The HPE PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support the Ultrium Tape Blades with the BL620c G7. Up to two storage blades are supported per server mix and match (Ultrium Tape and/or PCI Expansion Blades).
NOTE: The HPE PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2 and/or 3.
Expansion Blade
$359
$246.00
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
NOTE: The HPE PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support the HPE PCI Expansion Blade with the BL620c G7. Up to two expansion blades are supported per server mix and match (Ultrium Tape and/or PCI Expansion Blades).
NOTE: The HPE PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2 and/or 3.
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
NOTE: The BL620c G7 supports one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in socket CPU1.
NOTE: All processors within the server must be identical.
NOTE: All -B21 processor kits listed below contain one (1) processor.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM must be flashed to the latest BIOS prior to the upgrade.
Eight-Core Processors
Six-Core Processors
Four-Core Processor
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
