HPE ProLiant DL380 Gen10 Plus Drives

HPE ProLiant DL380 Gen10 Plus Drives

HPE ProLiant DL380 Gen10 Plus Drives

Expand the storage capabilities of your HPE ProLiant DL380 Gen10 Plus server with high-performance SSDs and HDDs. Whether you need high-speed NVMe storage or reliable SAS and SATA drives, we have the right solutions.

Available DL380 Gen10 Plus Drive Options:

  • SSD Options: NVMe (PCIe Gen3 & Gen4), SAS, and SATA.
  • HDD Options: High-capacity SAS & SATA drives.
  • Form Factors: 2.5" SFF, 3.5" LFF.

Looking for a specific DL380 Gen10 Plus drive? Browse our selection or contact us for assistance.

Drives

HPE Hard Disk Drives

Mission Critical - 12G SAS - SFF HDD

Enterprise - 12G SAS - SFF HDD

Midline - 12G SAS - SFF HDD

Midline - 6G SATA - SFF HDD

Midline - 12G SAS - LFF HDD

Midline - 6G SATA - LFF HDD

Solid State Drives

For SSD selection guidance, please visit https://ssd.hpe.com/

Read Intensive - 24G SAS - SFF - SSD

Notes:
- For non-SED SAS4 drives: 24G SAS speeds require U.3 backplane/cage and choice of either SR932i-p, or SR416i-a Tri-Mode controller. Otherwise downclocks to 12G SAS.
- For SED SAS4 drives: SED capability requires choice of either MR416i-a, MR416i-p, MR216i-a or MR216i-p Tri-Mode controller and will run at 12G speeds.

Read Intensive - 12G SAS - SFF - SSD

Write Intensive - 24G SAS - SFF - SSD

Notes: For non-SED SAS4 drives: 24G SAS speeds require U.3 backplane/cage and choice of either SR932i-p, or SR416i-a Tri-Mode controller. Otherwise downclocks to 12G SAS.

Mixed Use - 24G SAS - SFF - SSD

Notes:
- For non-SED SAS4 drives: 24G SAS speeds require U.3 backplane/cage and choice of either SR932i-p, or SR416i-a Tri-Mode controller. Otherwise downclocks to 12G SAS.
- For SED SAS4 drives: SED capability requires choice of either MR416i-a, MR416i-p, MR216i-a or MR216i-p Tri-Mode controller and will run at 12G speeds.

Mixed Use - 12G SAS - SFF - SSD

Very Read Optimized - 6G SATA - SFF - SSD

Read Intensive - 6G SATA - SFF - SSD

Mixed Use - 6G SATA - SFF - SSD

Read Intensive - 12G SAS - LFF -SSD

Mixed Use - 12G SAS - LFF -SSD

Very Read Optimized - 6G SATA - LFF - SSD

Read Intensive - 6G SATA - LFF - SSD

Read Intensive - NVMe - SFF - SSD

Write Intensive - NVMe - SFF - SSD

Mixed Use - NVMe - SFF - SSD

Mixed Use - NVMe - SFF - FIPS SSD

Read Intensive - NVMe - SFF - FIPS SSD

Notes:
- With CM6 FIPS drives: If any of the NVMe SED drive is selected then either Direct Attach (NVMe Trigger or Slimline Riser or AROC to NVMe Adapter) or any MR series tri mode controller must be selected.
SED Drive max quantity selection is dependent on selection of tri mode controllers or Direct Attach method selected (Refer Controller/ Riser Cards/ NVMe Enablement Setting category for details of Drive cage and Qty of Drive supported).
- With CM6 FIPS drives – supported MR Series Tri Mode Controllers:
ο P26279-B21 - Broadcom MR416i-a Controller for HPE Gen10 Plus
ο P06367-B21 - Broadcom MR416i-p Controller for HPE Gen10 Plus
ο P26325-B21 - Broadcom MR216i-a Controller for HPE Gen10 Plus
ο P26324-B21 - Broadcom MR216i-p Controller for HPE Gen10 Plus
- With Direct Attach SED drives:
ο TPM2.0 is required for Local Key Management. Keys will be encrypted locally by TPM and stored locally.
ο iLO Adv is required for Remote Key Management. Key is stored in remote key manager.
- With MR controller SED drives:
ο TPM is not required for Local Key Management as Key is stored in controller
ο iLO Adv is required for Remote Key Management. Key is stored in remote key manager.

HPE NVMe x8 Lanes Mixed Use HHHL

Hard Drive Blank Kits

Hard Drive Kits

Compare Selected