HPE ProLiant BL460c Gen9 Networking Adapters

HPE ProLiant BL460c Gen9 Networking Adapters

HPE ProLiant BL460c Gen9 Networking Adapters

Networking

NOTE:  A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when connected to an interconnect module with 10Gb Ethernet downlinks. 
NOTE:  A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to an interconnect module with 1Gb Ethernet downlinks. 
NOTE:  The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb interconnect in bays 3-6 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).

20 Gigabit Ethernet Mezzanine Cards

10 Gigabit Ethernet Mezzanine Cards

1 Gigabit Ethernet Mezzanine Cards

FlexibleLOM Adapters

NOTE:  The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM connectors and is already included in the pre-configured models. However, it must be added in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used to change these original FlexibleLOMs. 

20Gb FlexibleLOM Adapters

10Gb FlexibleLOM Adapters

HPE Infiniband Mezzanine Adapters

NOTE:  When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in mezzanine slot 2, both ports are active. 
HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter thumb
NOTE:  The QDR InfiniBand adapter may be installed in either mezzanine slot of the server.
HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter thumb
NOTE:  The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and may be installed in either mezzanine slot if operated in any other mode.
$189
$129.00
Compare Selected