HPE ProLiant BL2x220c G7 Parts
Unique Options
$233
$137.00
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$54
$38.00
$50
$39.00

NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
$81
$65.00
$237
$175.00
$56
$39.00
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
$56
$39.00
Unbuffered with ECC DIMMs (UDIMMs)
$57
$38.00
$66
$45.00
$67
$48.00
NOTE: All DDR3 memory option kits consist of one DIMM per kit.
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Non-Hot Plug Entry Solid State Drives (SSD)
NOTE: One non-hot plug drive per server node.
SATA Non-Hot Plug 2.5" SFF Entry (ETY) Drives
$101
$80.00
$355
$250.00
$113
$78.00
NOTE: One non-hot plug drive per server node.
InfiniBand Interconnects
NOTE: These are the Infiniband Interconnects that are supported on the NC543i 1-port 4xQDR IB/10Gb Flex-10 Adapter.
Ethernet Interconnects
$419
$299.00
$124
$95.00
$102
$81.00
$175
$125.00
$948
$859.00
$648
$514.00
NOTE: The interconnects with the"*" are not supported with the NC543i 4xQDR IB/10Gb Flex -10 Adapter. They are supported with the NC362i Gigabit Server Adapter.
USB and SD Options
$233
$137.00
$243
$219.00
$142
$95.00
NOTE: HPE qualified blank USB key for use with HPE ProLiant servers that support the VMware virtualization environment and other HPE value-add software like SmartStart. HPE recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware ESXi. Refer to HPE VMware Getting Started Guide for installation instructions.