HPE ProLiant BL460c G7 Parts
Ethernet Mezzanine Options
Gigabit Ethernet Mezzanines
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on 2 of the 4 ports.
$76
$56.00
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.
$81
$60.00
$204
$146.00
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps, full duplex per port only. For more information, see the "Network Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
NOTE: The NC522m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure).
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$197
$138.00
NOTE: The NC532m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.
$146
$98.00
NOTE: The NC542m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure)
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC542m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$64
$49.00
NOTE: The NC550m network adapter card is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 3-4 (HPE BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device. The NC550m will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
$320
$218.00
Fiber Channel Mezzanine Options
Memory
Registered DIMMS (RDIMMs)
$49
$38.00
$54
$38.00
$50
$39.00
$81
$65.00
$56
$39.00
$56
$39.00
$67
$48.00
$67
$48.00
Unbuffered with ECC DIMMs (UDIMMs)
$57
$38.00
$66
$45.00
$67
$48.00
NOTE: PC3L is a low voltage memory.
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives 
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
NOTE: The hard drive options are not required when configuring a Drive-less Model.
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$144
$98.00
$83
$58.00
$288
$220.00
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
$270
$199.00
$97
$75.00
SATA Hot Plug 2.5" Midline (MDL) Solid State Drives
Storage Controllers
$92
$74.00
$92
$74.00
Optional Upgrades
NOTE: The Smart Array Low Profile Battery supports the HPE Smart Array P700m Controller.
NOTE: The Smart Array battery option kit is required to enable battery-backed write cache (BBWC).
$86
$68.00
NOTE: The options listed below supports the integrated HPE Smart Array P410i.
$41
$29.00
NOTE: This kit is only for use with the 256 MB Cache Module.
NOTE: This kit includes the cable required to attach battery to cache.
$207
$156.00
NOTE: This kit includes the cable required to attach battery to cache.
$173
$129.00
$67
$48.00
$53
$39.00
I/O Expansion Options
c-Class Mezzanine Options
Ultrium Tape Blades
NOTE: LTO-4 Ultrium tape technology.
$3,987
$3,588.00
NOTE: LTO-3 Ultrium technology.
$2,772
$2,495.00
StorageWorks SB40c Storage Blade
$495
$385.00
Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation.
$359
$246.00
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Six Core Processor Option Kits
$203
$145.00
$423
$302.00
$273
$195.00
Four Core Processor Option Kits
$745
$532.00
$236
$167.00
$361
$258.00
$585
$418.00
$291
$208.00
Two Core Processor Option Kits
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
