HPE ProLiant ML330 G6 Parts
Memory
Registered DIMMs (RDIMMs)
$49
$38.00
$54
$38.00
$93
$65.00
$69
$49.00
Unbuffered with ECC DIMMs (UDIMMs)
$57
$38.00
$66
$45.00
Optical Media
$143
$129.00
$166
$149.00
NOTE: Please note that some of the earlier BTO models may not support adding SATA Optical Drives. To ensure compatibility of the SATA Optical Drives, please add additional optical drives only on models with Quad-Core 5400 Series.
Hard Drive Cage

NOTE: To reach maximum 8 LFF Drive support, it is required to purchase 2 Hot Plug HDD Drive Cage kit and Smart Array controller 8 ports or 2x 4 ports.
$795
$778.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: SATA Hot Plug models require HPE SAS Smart Array Controller.
NOTE: SAS Non-Hot Plug and SAS Hot Plug Models require HPE SAS Smart Array Controller.
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
SAS Hot Plug 3.5" Midline (MDL) Drives
SATA Hot Plug 3.5" Midline (MDL) Drives
$312
$248.00
$140
$98.00
$161
$115.00
$141
$109.00
$298
$225.00
$77
$55.00
$184
$148.00
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
$307
$219.00
$255
$198.00
$194
$145.00
$223
$180.00
$101
$80.00
$190
$140.00
SATA Hot Plug 3.5" Entry (ETY) Drives
$216
$159.00
$148
$115.00
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
$147
$113.00
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
$166
$134.00
$1,745
$1,229.00
Networking
Gigabit Ethernet Adapters
$81
$59.00
$165
$125.00
$161
$115.00
$72
$55.00
10 Gigabit Ethernet Adapters
NOTE: A minimum of 2 GB of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Power Supplies
CAUTION: Optional Power Supplies used for Redundancy "must" match the original supplied power supply. Upgrades for more power headroom, when replacing the original power supplies must match if purchased for redundancy. Option Kits contain optional power supply, an IEC power cable and PDU IEC cables. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.

NOTE: The HPE 750W power supply requires purchasing the Redundant Power Supply Enablement Kit (P/N 508544-B21).
$83
$59.00
Power Options

NOTE: The Redundant Power Supply Enablement kit does not integrate any power supply. To enable full Redundancy, it requires 2 units of 750W Power supply.
$550
$553
$498.00
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
Storage Controllers

SAS Controllers
Smart Array P800 Controller

NOTE: Supports internal or external drive attach.
$219
$165.00
Smart Array P212 Controller
Smart Array P410 Controller
Smart Array P411 Controller
Upgrade Options

NOTE: Supported on HPE Smart Array P212 and P410/ZM Controllers only.
$41
$29.00

NOTE: When used with the embedded HPE Smart Array P410i controller, this battery module also requires a 24 inch SFP Battery Cable (496029-B21).
$173
$129.00

NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
$207
$156.00
SAS HBA
SCSI HBA

NOTE: Recommended HBA for SCSI tape drive connect.
$207
$149.00
Processors
NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Intel Xeon DP 5500 Family
Quad-Core Processors
$943
$849.00
$194
$147.00
$1,278
$1,150.00
ML330G6 Processor Kit
Dual-Core Processors
NOTE: Each Processor Kit includes (1) processor/(1) heatsink/ (1) Processor board. The Processor board integrated (1) processor socket and (9) DIMM slots.
NOTE: When two (2) Xeon E5500 processors are installed, the system QPI will be locked at 4.8 GT/s.