HPE ProLiant DL385 Gen10 Plus v2 Adapters
Enhance the networking capabilities of your HPE ProLiant DL385 Gen10 Plus v2 server with enterprise-grade network interface cards (NICs) and Ethernet adapters. Connect your infrastructure to high-speed networks for improved efficiency and performance.
Available DL385 Gen10 Plus v2 Networking Options:
- Ethernet Adapters: 1GbE, 10GbE, 25GbE, and 100GbE options.
- Network Interface Cards (NICs): High-speed PCIe-based networking solutions.
- Fiber & Copper Connectivity: SFP+, SFP28, QSFP28, and RJ-45 options.
✅ Looking for a specific DL385 Gen10 Plus v2 networking solution? Browse our selection or contact us for assistance.
Networking
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
10/25 Gigabit Ethernet adapters
100/200/400 Gigabit Ethernet adapters
$2,405
$1,850.00
$273
$195.00
Notes:
- 4-port adapters go only into Slot 1.
- A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
OCP Adapters
$745
$560.00

Notes: When this OCP card is selected, the OCP Upgrade Cable Kit (P14603-B21) must be selected.
$532
$400.00
Notes:
- OCP adapters do not consume PCIe slot.
- Only 1 slot is available for OCP adapters.
- Only SFF OCP adapters below 35W can be supported

Notes: When this OCP card is selected, the OCP Upgrade Cable Kit (P14603-B21) must be selected.
$1,571
$1,181.00
$389
$299.00
HPE InfiniBand
Notes: When either one of these two OCP cards are selected, the OCP Upgrade Cable Kit (P14603-B21) must be selected.
$2,823
$2,139.00
$1,288
$875.00
$1,680
$1,159.00

Notes: Requires selection of a 2nd processor

Notes: Required to add additional x16 PCIe Gen4 lanes for Primary/Secondary Riser3