HPE ProLiant DL320 Gen12 Memory
Upgrade your HPE ProLiant DL320 Gen12 server with genuine DDR5 ECC Registered (RDIMM) memory. This 1U single-socket platform pairs the latest Intel® Xeon® 6 processors with high-bandwidth DDR5, and every module we sell is guaranteed compatible with your DL320 Gen12.
DL320 Gen12 Memory Specifications
- Memory type: DDR5 ECC Registered (RDIMM). The DL320 Gen12 does not support LRDIMM, UDIMM, or non-ECC memory.
- Speed: Up to 6400 MT/s at 1 DIMM per channel, stepping down to 6000 MT/s at 2 DIMMs per channel (the maximum is set by the installed Intel® Xeon® 6 processor).
- Capacities: 16GB, 32GB, 64GB, 128GB, and 256GB modules.
- Maximum memory: Up to 4TB across 16 DIMM slots — 8 channels, 2 DIMMs per channel, on a single processor.
Match your memory to your Xeon 6 CPU and DIMM layout. The DL320 Gen12 runs DDR5 RDIMM at up to 6400 MT/s with one DIMM per channel, dropping to 6000 MT/s when both slots in a channel are filled. Your specific Intel® Xeon® 6 processor sets the ceiling, and the server runs all memory at the speed of the slowest module installed — so use matched HPE DDR5-6400 Smart Memory for full performance.
Memory Population Rules
For best performance, install matched DDR5 RDIMM kits and fill the white (first) slot in each channel before the second. Supported DIMM counts are 1, 2, 4, 8, 12, or 16 with P-core Xeon® 6 CPUs (1, 2, 4, 8, or 16 with E-core CPUs), and 256GB modules require the HPE High-Performance Fan Kit. See the full slot-by-slot layout here:
HPE Gen12 Memory Population Rules — Intel Xeon 6 (PDF)
DL320 Gen12 Memory FAQ
What type of memory does the HPE DL320 Gen12 use?
DDR5 ECC Registered (RDIMM) memory only — LRDIMM, unbuffered (UDIMM), and non-ECC modules are not supported.
How much memory can the DL320 Gen12 hold?
Up to 4TB total, using 16 × 256GB DDR5 RDIMMs across its 16 DIMM slots. Note that 256GB modules require high-performance fans.
What is the maximum memory speed?
Up to 6400 MT/s with one DIMM per channel, or 6000 MT/s when both slots in a channel are populated. The exact maximum depends on the installed Intel Xeon 6 processor, and the server runs all memory at the slowest installed speed.
Does the DL320 Gen12 support MRDIMM?
The platform supports MRDIMM (up to 8000 MT/s, one DIMM per channel, with P-core Xeon 6 CPUs), but HPE has not yet released MRDIMM kits into the standard ProLiant portfolio. DDR5 RDIMM is the memory to buy for this server today.
✅ Looking for a specific DL320 Gen12 memory module? Browse our full selection above, or contact our HPE specialists for a guaranteed-compatible recommendation.


