HPE ProLiant DL320 G6 Parts
Memory
Registered Dimms (RDIMMs)
$49
$38.00
$54
$38.00
$93
$65.00
$56
$39.00
$69
$49.00
Unbuffered with ECC DIMMs (UDIMMs)
$57
$38.00
$66
$45.00
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see:
Optical Media
$80
$65.00
$299
$249.00
Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G 10K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives
6G 15K Drives
3G 15K Drives
3G 10K Drives
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
$133
$95.00
$186
$128.00
SAS Hot Plug 3.5" Midline (MDL) Drives
NOTE: SAS Hard Drives are only supported with optional SAS HBA or RAID cards.
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
$144
$98.00
$83
$58.00
$288
$220.00
SATA Hot Plug 3.5" Midline (MDL) Drives
$312
$248.00
$140
$98.00
$161
$115.00
$141
$109.00
$298
$225.00
$77
$55.00
$184
$148.00
SATA Hot Plug 3.5" Entry (ETY) Drives
$216
$159.00
$148
$115.00
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
$270
$199.00
$97
$75.00
SATA Hot Plug Midline (MDL) Solid State Drives
$186
$135.00
$380
$299.00
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
$166
$134.00
$1,745
$1,229.00
Networking
Gigabit Ethernet Adapters
$81
$59.00
$165
$125.00
$161
$115.00
$72
$55.00
10 Gigabit Ethernet Adapters

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
$92
$75.00
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Storage Controllers
SAS Controllers
Smart Array P212 Controller
Smart Array P410 Controller
Smart Array P411 Controller
Optional Upgrades

NOTE: Supported on HPE Smart Array P212 Controller only.
$41
$29.00

NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
$173
$129.00

NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
$207
$156.00
SAS HBA

NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
$92
$65.00

NOTE: This option is required for any internal port HBA or controller that has a standard 4 port SAS/SATA connector.
$166
$149.00
SCSI HBA
$207
$149.00