HPE ProLiant DL320 G6 Parts

HPE ProLiant DL320 G6 Parts

HPE ProLiant DL320 G6 Parts

Memory

Registered Dimms (RDIMMs)

Unbuffered with ECC DIMMs (UDIMMs)

NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see:

Drives

NOTE: This server model can be configured to use either 2.5 inch Small Form Factor (SFF) drives OR 3.5 inch Large Form Factor drives. Please be sure to verify which type your machine is configured to use before placing an order. If you are unsure about which type you need, please visit the section #1 – Does my machine use 2.5 inch SFF or 3.5 inch LFF drives? in our blog post here for help making this decision.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives

12G 15K Drives

12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed

12G 10K Drives

6G 15K Drives

6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed

6G 10K Drives

3G 15K Drives

3G 10K Drives

3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed

SAS Hot Plug 3.5" LFF Enterprise (ENT) Drives

SAS Hot Plug 2.5" SFF Midline (MDL) Drives

SAS Hot Plug 3.5" Midline (MDL) Drives

SATA Hot Plug 2.5" SFF Midline (MDL) Drives

SATA Hot Plug 3.5" Midline (MDL) Drives

SATA Hot Plug 3.5" Entry (ETY) Drives

SATA Hot Plug 2.5" SFF Entry (ETY) Drives

SATA Hot Plug Midline (MDL) Solid State Drives

SATA Hot Plug 3.5" Midline (MDL) Solid State Drives

Networking

Gigabit Ethernet Adapters

10 Gigabit Ethernet Adapters

HPE NC522SFP Dual Port 10GbE Server Adapter<br><img src='/images/bestseller.gif' alt='best seller' width='91' height='12'> thumb
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
MX$1,731
MX$1,411.28
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.

Storage Controllers

SAS Controllers

Optional Upgrades

256 MB Cache Module thumb
NOTE: Supported on HPE Smart Array P212 Controller only.
MX$772
MX$545.69
512MB BBWC thumb
NOTE: Supported on HPE Smart Array P410 Controller and HPE Smart Array P411 Controller only.
MX$3,255
MX$2,427.39
Battery Kit upgrade thumb
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HPE Smart Array P212 Controller, HPE Smart Array P410 Controller, and HPE Smart Array P411 Controller only.
MX$5,005
MX$2,935.45

SAS HBA

HPE SC08Ge Host Bus Adapter thumb
NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
MX$1,731
MX$1,223.11
HPE HBA SAS-SATA 4x1LN Cable Kit thumb
NOTE: This option is required for any internal port HBA or controller that has a standard 4 port SAS/SATA connector.
MX$3,124
MX$2,803.73

SCSI HBA

Compare Selected