HPE ProLiant ML110 G6 Parts
Memory
£50
£35.66
£49
£33.44
Optical Media
£106
£95.85
£123
£110.71
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
£228
£162.72
£189
£147.11
£144
£107.74
£166
£133.74
£141
£104.02
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
£109
£83.96
NOTE: Support for SAS non-hot plug drives requires HPE SAS/Smart Array Controller.
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
Networking
£54
£40.87
Storage Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
Optional Upgrades
£30
£21.55

NOTE: Required to enable BBWC on the 256MB cache.
£198
£115.91

NOTE: This cable will only be required when Smart Array Controller is ordered with a BTO configuration.
£189
£156.03
SCSI HBA

NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
£189
£110.71
Tape Backup
£822
£739.29

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
£822
£739.29

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
£2,311
£1,373.81

NOTE: Requires HPE 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
£4,028
£3,625.10

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
£2,641
£2,376.86
Disk Backup
HPE StorageWorks D2D Backup Systems with Backup Data Deduplication
NOTE: These are network connected appliances with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
USB Removable Media RDX Disk Backup Systems

NOTE: 320GB of disk capacity per data cartridge.
£412
£370.76

NOTE: 500GB of disk capacity per data cartridge.
£701
£630.81

NOTE: 750GB of disk capacity per data cartridge.
£574
£516.39