HPE ProLiant ML110 G6 Parts
Memory
¥9,898
¥7,091
¥9,750
¥6,648
Optical Media
¥21,125
¥19,057
¥24,522
¥22,011
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
¥45,352
¥32,352
¥37,670
¥29,250
¥28,659
¥21,420
¥32,943
¥26,591
¥14,920
¥11,818
¥28,068
¥20,682
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
¥21,716
¥16,693
¥12,704
¥10,045
NOTE: Support for SAS non-hot plug drives requires HPE SAS/Smart Array Controller.
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
¥42,545
¥24,966
¥35,011
¥20,534
¥14,182
¥11,227
¥97,351
¥86,862
¥13,591
¥10,784
¥17,284
¥12,704
¥14,182
¥11,227
¥22,897
¥18,466
¥25,852
¥20,534
¥34,420
¥26,443
Networking
¥11,966
¥8,716
¥10,636
¥8,125
Storage Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
Optional Upgrades
¥6,057
¥4,284

NOTE: Required to enable BBWC on the 256MB cache.
¥39,295
¥23,045

NOTE: This cable will only be required when Smart Array Controller is ordered with a BTO configuration.
¥37,670
¥31,022
SCSI HBA

NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
¥37,522
¥22,011
Tape Backup
¥163,384
¥146,987

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
¥163,384
¥146,987

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
¥459,426
¥273,144

NOTE: Requires HPE 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
¥800,819
¥720,752

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
¥525,016
¥472,573
Disk Backup
HPE StorageWorks D2D Backup Systems with Backup Data Deduplication
NOTE: These are network connected appliances with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
USB Removable Media RDX Disk Backup Systems

NOTE: 320GB of disk capacity per data cartridge.
¥81,840
¥73,715

NOTE: 500GB of disk capacity per data cartridge.
¥139,305
¥125,419

NOTE: 750GB of disk capacity per data cartridge.
¥114,044
¥102,669