HPE ProLiant ML110 G6 Parts
Memory
$67
$48.00
$66
$45.00
Optical Media
$143
$129.00
$166
$149.00
Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
$307
$219.00
$255
$198.00
$194
$145.00
$223
$180.00
$101
$80.00
$190
$140.00
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
$147
$113.00
NOTE: Support for SAS non-hot plug drives requires HPE SAS/Smart Array Controller.
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
Networking
$72
$55.00
Storage Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
Optional Upgrades
$41
$29.00

NOTE: Required to enable BBWC on the 256MB cache.
$207
$156.00

NOTE: This cable will only be required when Smart Array Controller is ordered with a BTO configuration.
$255
$210.00
SCSI HBA

NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
$207
$149.00
Tape Backup
$1,106
$995.00

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
$1,106
$995.00

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
$2,054
$1,849.00

NOTE: Requires HPE 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
$5,421
$4,879.00

NOTE: Connection using HPE P212 Smart Array Controller SAS (462828-B21) recommended.
$3,554
$3,199.00
Disk Backup
HPE StorageWorks D2D Backup Systems with Backup Data Deduplication
NOTE: These are network connected appliances with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
USB Removable Media RDX Disk Backup Systems

NOTE: 320GB of disk capacity per data cartridge.
$554
$499.00

NOTE: 500GB of disk capacity per data cartridge.
$943
$849.00

NOTE: 750GB of disk capacity per data cartridge.
$772
$695.00