HPE ProLiant DL385 Gen10 Plus Networking Adapters
Networking
PCIe Adapters
1 Gigabit Ethernet adapters
¥121,486
¥72,196
10 Gigabit Ethernet adapters
¥163,382
¥95,826
¥154,684
¥90,752
¥112,932
¥66,252
10/25 Gigabit Ethernet adapters
¥182,518
¥107,134
100/200 Gigabit Ethernet adapters
¥348,655
¥268,196
¥150,045
¥87,997
¥130,329
¥108,728
Notes:
- 4-port adapters go only into Slot 1.
- A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
OCP Adapters
¥138,302
¥81,184

Notes: Current Mellanox OCP NIC MCX562A does not support multi-host configuration as two x8, so please make sure to use cable P14318-001 to connect to CPU1 to upgrade and configure to one x16 OCP NIC.
¥98,870
¥57,988
Notes:
- OCP adapters do not consume PCIe slot.
- Only 1 slot is available for OCP adapters.
- Only SFF OCP adapters below 35W can be supported
¥291,827
¥171,211
Notes: For 100Gb/200Gb stand-up and OCP cards, high performance fan kits need to be supported. Ambient
temperature needs to be restricted under 25C.
¥56,394
¥43,346
HPE InfiniBand
¥528,419
¥310,093
¥216,152
¥126,850
HPE I/O Expansion Options
Notes: For a Secondary/Tertiary riser the second processor is required

Notes: Requires selection of HPE DL38X Gen10 Plus Tertiary NEBS-compliant Riser Kit (P14577-B21)

Notes: Requires selection of a 2nd processor

Notes: Requires selection of a 2nd processor
¥76,255
¥54,799

Notes: Requires selection of a 2nd processor

Notes: Requires selection of a 2nd processor

Notes: Requires selection of a 2nd processor

Notes: Required to add additional x16 PCIe Gen4 lanes for Primary/Secondary Riser3