HPE ProLiant DL360 G6 Parts
Memory
Registered DIMMs (RDIMMs)
¥6,994
¥5,424
¥7,708
¥5,424
¥13,274
¥9,278
¥9,849
¥6,994
¥7,993
¥5,567
¥9,563
¥6,851
Unbuffered with ECC DIMMs (UDIMMs)
¥8,136
¥5,424
¥9,421
¥6,423
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see:
Optical Media
¥9,135
¥7,422
NOTE: Integrated DVD/Optical drive option is supported on 4 Hard drive models only.
¥13,560
¥10,991
¥28,405
¥26,834
Drives
The HPE ProLiant DL360 G6 (Generation 6) server can support up to eight (8) 2.5" SFF (small form factor) hot plug hard drives.
You can use either SAS, SATA, or Solid State drives in the DL360 G6. Most customers opt for Enterprise SAS drives due to the superior performance - faster data transfer rates and spindle speeds. See the full list of available drives below. Feel free to contact us via Live Chat with with questions about hard drives for DL360G6 servers.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
SAS Hot Plug 2.5" SFF Enterprise (ENT) Drives
12G 15K Drives
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
¥60,806
¥35,684
¥68,514
¥46,389
¥32,687
¥23,552
12G 10K Drives 
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
¥51,528
¥30,260
¥37,968
¥22,267
¥69,227
¥49,815
¥42,678
¥29,832
6G 15K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
¥16,986
¥12,133
¥8,992
¥6,423
6G 10K Drives
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
¥16,272
¥11,419
¥18,556
¥13,560
¥13,417
¥7,851
¥16,986
¥12,133
¥13,417
¥7,851
¥18,270
¥10,705
3G 15K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
¥9,421
¥6,851
¥11,704
¥7,851
¥14,845
¥11,990
¥15,844
¥11,133
3G 10K Drives
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
¥11,990
¥6,994
¥8,850
¥6,280
¥11,276
¥7,851
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
SAS Hot Plug 2.5" SFF Midline (MDL) Drives
¥23,123
¥13,560
¥26,549
¥18,270
SATA Hot Plug 2.5" SFF Midline (MDL) Drives
¥23,837
¥13,988
¥11,847
¥8,279
¥41,108
¥31,402
SATA Hot Plug 2.5" SFF Entry (ETY) Drives
¥38,539
¥28,405
¥13,845
¥10,705
SATA Hot Plug Midline (MDL) Solid State Drives
¥26,549
¥19,269
¥54,240
¥42,678
Hot Plug HDD Backplane Option
¥56,238
¥32,972
NOTE: For 4 addition HDs in 5-8 slots.
NOTE: Optical/DVD cannot be used with this option.
Networking
Gigabit Ethernet Adapters
¥11,562
¥8,421
¥23,552
¥17,842
¥22,981
¥16,415
¥10,277
¥7,851
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
¥13,132
¥10,705
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
Power Supplies
CAUTION: Many HPE ProLiant Servers now offer new power options, including Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration. This provides improved power delivery and the advantage of reclaiming lost power. Prior to making a power supply selection it is "highly recommended" that the "HPE Power Advisor" is run to determine the right size power supply for your server configuration. In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
¥13,132
¥7,708
¥11,847
¥8,421
¥26,264
¥19,698
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
NOTE: For regional specific power cables please refer to Power Cable section below.
Power Options
NOTE: Supports 3rd Party PCI Video Graphics cards.
¥42,107
¥28,405
Storage Controllers
NOTE: The DL360 G6 Server comes standard with an integrated P410i Smart Array Controller designed to mange up to 8 SFF hard drives from HP. For additional capabilities and capacities HPE offers additional Smart Arrays.
SAS Controllers
Smart Array P800 Controller
Smart Array P212 Controller
Smart Array P411 Controller
Optional Upgrades
NOTE: Supported on HPE Smart Array P212 Controller only.
¥5,852
¥4,139
¥24,693
¥18,413
NOTE: To enable BBWC on the 256MB cache.
¥37,968
¥22,267
NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HPE Software Technical Support Services.
¥115,046
¥92,779
SAS HBA
¥13,132
¥9,278
SCSI HBA
NOTE: Recommended HBA for SCSI tape drive connect.
¥36,255
¥21,268
Processors
| NOTE: HPE server processor pricing is volatile and availability is unpredictable. Please select any CPU kit below and click Request Quote and submit the form to get the current pricing for that CPU kit. |
NOTE: All CPU Kits come complete with heatsink, fan(s), etc
Quad-Core Processors
¥55,810
¥39,823
¥42,535
¥30,403
¥62,947
¥44,677
¥51,528
¥36,826
¥27,548
¥22,267
¥45,818
¥32,687
¥38,824
¥27,691
¥37,111
¥26,549
Dual-Core Processors
NOTE: Up to 2 processors supported. Performance Model configurations include two processors.
NOTE: HT indicates that the processor model supports Intel /Hyper-Threading Technology
NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4,3,2 and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicated the performance/wattage of the processor. X denotes High Performance/Wattage; E denotes Enterprise Performance/Wattage (Mainstream); and L denotes Lower Wattage.
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
