HPE ProLiant DL380 G5 Hard Drives
HPE ProLiant DL380 G5 Hard Drives
Upgrade or replace your DL380 G5 server's drives with compatible SATA or SAS HDDs and legacy SSDs. Ideal for maintaining systems still running critical legacy software or workloads.
Drive Compatibility:
- 3.5" LFF and 2.5" SFF options (depending on chassis)
- 6G SATA and 3G/6G SAS supported
- Mix of capacity and performance drives
✅ Not sure which drive works in your chassis? Contact our team for guidance.
The HPE ProLiant DL380 G5 (Generation 5) server can support up to eight (8) 2.5" SFF (small form factor) hot plug hard drives.
You can use either SAS or SATA drives in the DL380 G5. Most customers opt for Enterprise SAS drives due to the superior performance - faster data transfer rates and spindle speeds. See the full list of available drives below. Feel free to contact us via Live Chat with with questions about hard drives for DL380G5 servers.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
12G = 12 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
6G = 6 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
15K = 15,000 rpm Rotational Speed
3G = 3 Gb/sec Transfer Rate Synchronous (Maximum)
10K = 10,000 rpm Rotational Speed
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
Compare Selected