HPE ProLiant WS460c Gen8 Networking Adapters

HPE ProLiant WS460c Gen8 Networking Adapters

HPE ProLiant WS460c Gen8 Networking Adapters

Networking

NOTE:  Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE:  A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when connected to an interconnect module with 10Gb Ethernet downlinks. 
NOTE:  A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to an interconnect module with 1Gb Ethernet downlinks. 
NOTE:  The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb interconnect in bays 3-6 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE BladeSystem c3000 Enclosure).

FlexibleLOM Adapters

NOTE:  The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM connectors and is already included in the pre-configured models. However, it must be added in Step 2 for Configure-to-order Models. The FlexibleLOM options below are used to change these original FlexibleLOMs.

10 or 20 Gigabit Ethernet FlexibleLOM

HPE Infiniband Mezzanine Adapters

NOTE:  InfiniBand mezzanine HCAs are supported on the HPE ProLiant WS460c Gen8 with server OS or hypervisors. Windows client OS (Windows 7) not supported.
NOTE:  When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active (regardless of operating mode). When installed in any other mezzanine slot, both ports are active.
HPE Infiniband QDR/Ethernet 10Gb 2-port 544M Adapter thumb
NOTE:  The QDR InfiniBand adapter may be installed in upper mezzanine slot of the WS460cwhen vacant
$91
$65.00
HPE Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544M Adapter thumb
NOTE:  The FDR InfiniBand adapter may be installed in upper mezzanine slot of the WS460cwhen vacant
$203
$137.00
Compare Selected