HPE ProLiant DL380 Gen10 Plus Networking Adapters
Enhance the networking capabilities of your HPE ProLiant DL380 Gen10 Plus server with enterprise-grade network interface cards (NICs) and Ethernet adapters. Connect your infrastructure to high-speed networks for improved efficiency and performance.
Available DL380 Gen10 Plus Networking Options:
- Ethernet Adapters: 1GbE, 10GbE, 25GbE, and 100GbE options.
- Network Interface Cards (NICs): High-speed PCIe-based networking solutions.
- Fiber & Copper Connectivity: SFP+, SFP28, QSFP28, and RJ-45 options.
✅ Looking for a specific DL380 Gen10 Plus networking solution? Browse our selection or contact us for assistance.
Networking
1 Gigabit Ethernet adapters
10 Gigabit Ethernet adapters
Notes: Unless otherwise noted, one of the below 10Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis. The DL380 Gen10 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.
25 Gigabit Ethernet adapters
Notes: Unless otherwise noted, one of the below 10/25Gb networking adapters below can be selected as the primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis.
The DL380 Gen10 Plus NC CTO chassis does not come with embedded networking, hence the requirement to configure with either an OCP3 or select PCIe networking adapter.
Notes: Could observe sub-optimal performance if installed in x8 slot.
$983
$739.00
Notes: Could observe sub-optimal performance if installed in x8 slot.
$395
$297.00
100 Gigabit Ethernet Adapters
$2,405
$1,850.00
Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
$684
$519.00
1. These cards are not supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
$1,047
$748.00
Notes:
- A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
- Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information.
- Not allowed in slots 3 or 6
Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
$807
$607.00
200 Gigabit Ethernet Adapters
1. These cards ar note supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
200 Gigabit Slingshot Adapters
Notes:
- This option requires the selection of Max Performance Fan Kit (P14608-B21).
- This option cannot be selected with 12LFF Model X.
- Max = 3
- Can only be selected or configured for a Cray Shasta Solutions or Rogue Solutions. Not configurable for Non-Cray or Non-Rogue Solutions.
OCP 3.0 Adapters
$745
$560.00
Notes: Adapter operates in either x8 or x16 mode. If x16 is desired, must select the HPE ProLiant DL300 Gen10 Plus OCP x16 Enablement Kit (P36661-B21)
$532
$400.00
Notes:
- Requires selection of HPE DL300 Gen10+ OCP x16 enablement Kit (P36661-B21).
- This option requires the selection of Max Performance Fan Kit (P14608-B21).
- This option cannot be selected with 12LFF Model X and 24SFF Model X.
- This option cannot be selected if 4LFF Midtray (P26919-B21/ P55700-B21) or 8SFF x1 Mid Tray (P27193-B21) or 8SFF U.3 x4 Mid Tray (P39769-B21) is selected.
$1,571
$1,181.00
OCP 3.0 Enablement
HPE InfiniBand
1. These cards are not supported with 12LFF/24SFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Not supported with DIMMs with more than 128GB
5. Not supported with CPUs more than 240W
6. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
7. Could observe sub-optimal performance if installed in x8 slot.
1. This card is not supported with 12LFF CTO config.
2. This card is not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
5. Could observe sub-optimal performance if installed in x8 slot.
1. These cards ar note supported with 12LFF CTO config.
2. These cards are not supported with mid-tray drive cages for both LFF/SFF chassis.
3. Required to use Max Performance Fan Kit
4. Only supported on 1/2/4/5/7 PCIe slots, not supported in slots 3, and 6.
5. Could observe sub-optimal performance if installed in x8 slot.
$2,823
$2,139.00
Notes:
- Not allowed in slots 3 or 6
$273
$195.00
Notes:
- Could observe sub-optimal performance if installed in x8 slot.
- Not allowed in slots 3 or 6
$1,288
$875.00
Why Global One?
- Trusted by thousands. Over 32,000 customers in 100+ countries trust Global One Technology to deliver mission-critical HP Enterprise hardware - including Fortune 500 businesses, schools, hospitals, and federal, state, and local goverment agencies.
- HPE is our specialty! We only sell genuine HP Enterprise parts.
- EASY ordering process. Purchase online now with credit card or PayPal!
- FAST shipping. Global One Technology ships orders received by 5pm the same day and offers NEXT DAY delivery to US customers.
